Report Cams Down and Forum Errors

Report cams up/down or if you need technical assistance.
User avatar
Sandy_W
Topic Assistant
Posts: 18012
Joined: Feb 22, 2018
Location: Arkansas

Re: Report Cams Down and Forum Errors

Post by Sandy_W » Tue Jul 02, 2019 12:39 pm

12:38 pm for the Delta 2 embedded cams and the zoomer cams, both offline. The embedded cams have been cycling on and off. I just tried to get on the zoomer cams and get the "can't reach page" error. 12:42 am got into the zoomer cams but the east cam is still offline. Well, that didn't last long as lost the embedded cams and zoomer cams again at 12:43ish pm.
“Eagles: When they walk, they stumble. They are not what one would call graceful. They were not designed to walk. They fly. And when they fly, oh, how they fly, so free, so graceful. They see from the sky what we never see.” – Unknown

User avatar
Sandy_W
Topic Assistant
Posts: 18012
Joined: Feb 22, 2018
Location: Arkansas

Re: Report Cams Down and Forum Errors

Post by Sandy_W » Wed Jul 03, 2019 6:28 pm

July 3rd, 6:26 pm the embedded Delta 2 cams are offline and coming back on at 6:14 pm then offline at 6:22 pm. Was just on the zoomer cams and had offline issues too.
2019-07-03_20-25-31.jpg
“Eagles: When they walk, they stumble. They are not what one would call graceful. They were not designed to walk. They fly. And when they fly, oh, how they fly, so free, so graceful. They see from the sky what we never see.” – Unknown

User avatar
JudyB
Admin
Posts: 4138
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Wed Jul 03, 2019 6:35 pm

Sandy_W wrote:
Wed Jul 03, 2019 6:28 pm
July 3rd, 6:26 pm the embedded Delta 2 cams are offline and coming back on at 6:14 pm then offline at 6:22 pm. Was just on the zoomer cams and had offline issues too. 2019-07-03_20-25-31.jpg
Thanks for letting me know, Sandy, and I'm afraid I've hit the wall. I need to lie down for a bit, and if I'm up again in a few hours, I'll see if there's anything I can do, but if the zoomer cams are going down too, it's likely to be an issue at the site.

I'm sorry - and good night. :offtobed:

User avatar
Sandy_W
Topic Assistant
Posts: 18012
Joined: Feb 22, 2018
Location: Arkansas

Re: Report Cams Down and Forum Errors

Post by Sandy_W » Thu Jul 04, 2019 5:11 am

JudyB wrote:
Wed Jul 03, 2019 6:35 pm
Sandy_W wrote:
Wed Jul 03, 2019 6:28 pm
July 3rd, 6:26 pm the embedded Delta 2 cams are offline and coming back on at 6:14 pm then offline at 6:22 pm. Was just on the zoomer cams and had offline issues too. 2019-07-03_20-25-31.jpg
Thanks for letting me know, Sandy, and I'm afraid I've hit the wall. I need to lie down for a bit, and if I'm up again in a few hours, I'll see if there's anything I can do, but if the zoomer cams are going down too, it's likely to be an issue at the site.

I'm sorry - and good night. :offtobed:
Thanks for checking in, Judy. It was a stressful day for sure and thanks for all you do to get us back online with the forum. Understand hitting that wall. Smiles
“Eagles: When they walk, they stumble. They are not what one would call graceful. They were not designed to walk. They fly. And when they fly, oh, how they fly, so free, so graceful. They see from the sky what we never see.” – Unknown

User avatar
Sandy_W
Topic Assistant
Posts: 18012
Joined: Feb 22, 2018
Location: Arkansas

Re: Report Cams Down and Forum Errors

Post by Sandy_W » Sat Jul 06, 2019 5:51 am

5:49 am at Delta, both the embedded cams and zoomer cams are going offline since 5:30 am. Right now all of the cams are offline. Do they need to be reset?
“Eagles: When they walk, they stumble. They are not what one would call graceful. They were not designed to walk. They fly. And when they fly, oh, how they fly, so free, so graceful. They see from the sky what we never see.” – Unknown

amyklai
Topic Assistant
Posts: 3273
Joined: Feb 22, 2018

Re: Report Cams Down and Forum Errors

Post by amyklai » Sat Jul 06, 2019 9:41 am

9.40a Is it possible for WA cam to be rebooted at WR? its sticking ,

User avatar
JudyB
Admin
Posts: 4138
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Sat Jul 06, 2019 10:22 am

amyklai wrote:
Sat Jul 06, 2019 9:41 am
9.40a Is it possible for WA cam to be rebooted at WR? its sticking ,
Done! It took me something like 10 tries to log in, so there may be an issue with the bandwidth at the site.

User avatar
JudyB
Admin
Posts: 4138
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Sat Jul 06, 2019 10:24 am

Sandy_W wrote:
Sat Jul 06, 2019 5:51 am
5:49 am at Delta, both the embedded cams and zoomer cams are going offline since 5:30 am. Right now all of the cams are offline. Do they need to be reset?
They're working now, Sandy. I need to check with Ken to see if he's heard anything more about the planned upgrade in service at the site - not sure I can do that today - hopefully tomorrow or Monday.

User avatar
SueB
Zoomer
Posts: 22929
Joined: Feb 20, 2018
Location: SW Florida

Re: Report Cams Down and Forum Errors

Post by SueB » Sat Jul 06, 2019 4:21 pm

Good Afternoon All! I know nothing can be done but just as an FYI, the Delta cams have all gone down and back up at least 3 or 4 times in the last 20 minutes...they are currently all down.

User avatar
Sandy_W
Topic Assistant
Posts: 18012
Joined: Feb 22, 2018
Location: Arkansas

Re: Report Cams Down and Forum Errors

Post by Sandy_W » Sun Jul 07, 2019 4:02 pm

4:01 pm the Delta 2 embedded cams are cycling on and offline. I am not on the zoomer cams and not sure how they are functioning. Just adding the zoomer cams were cycling on and off as well.
“Eagles: When they walk, they stumble. They are not what one would call graceful. They were not designed to walk. They fly. And when they fly, oh, how they fly, so free, so graceful. They see from the sky what we never see.” – Unknown

User avatar
JudyB
Admin
Posts: 4138
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Sun Jul 07, 2019 5:15 pm

Sandy_W wrote:
Sun Jul 07, 2019 4:02 pm
4:01 pm the Delta 2 embedded cams are cycling on and offline. I am not on the zoomer cams and not sure how they are functioning. Just adding the zoomer cams were cycling on and off as well.
I sent a message to Ken - it’s a long shot but maybe he can help. And I heard back and he’s away from the computer but will check as soon as he gets back.

Wonderful news about Coola - happy flying, young fledgling!

User avatar
Yolande
Topic Assistant
Posts: 5322
Joined: Feb 22, 2018

Re: Report Cams Down and Forum Errors

Post by Yolande » Tue Jul 09, 2019 1:01 pm

Good afternoon - the embedded and PTZ cams at HM went down a few minutes ago...

Thank-you!

User avatar
JudyB
Admin
Posts: 4138
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Tue Jul 09, 2019 1:20 pm

Yolande wrote:
Tue Jul 09, 2019 1:01 pm
Good afternoon - the embedded and PTZ cams at HM went down a few minutes ago...

Thank-you!
Thanks, Yolande. Looks like a power outage - hopefully they'll get the power restored quickly and the cams will pop back on!
20190709_023.jpg

User avatar
Yolande
Topic Assistant
Posts: 5322
Joined: Feb 22, 2018

Re: Report Cams Down and Forum Errors

Post by Yolande » Tue Jul 09, 2019 3:35 pm

Thank-you Judy - just back and I see the cams are all up.....at HM

User avatar
JudyB
Admin
Posts: 4138
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Tue Jul 09, 2019 3:38 pm

Yolande wrote:
Tue Jul 09, 2019 3:35 pm
Thank-you Judy - just back and I see the cams are all up.....at HM
Excellent - thanks, Yolande!

User avatar
Jean
Topic Assistant
Posts: 14896
Joined: Feb 19, 2018
Location: Langley, BC

Re: Report Cams Down and Forum Errors

Post by Jean » Tue Jul 09, 2019 8:08 pm

8:07pm.......All cams at Delta2 have gone off at least twice today, once just a few minutes ago. They may have gone off more often but we haven't had zoomers here today as much as we usually do. So it would have been unnoticed if they went down more often.

Cam controls are not being very friendly......hard to move.
"Volunteers do not necessarily have the time..............they have the heart"..........Elizabeth Andrew

(Member since 9/10/11)

User avatar
Jean
Topic Assistant
Posts: 14896
Joined: Feb 19, 2018
Location: Langley, BC

Re: Report Cams Down and Forum Errors

Post by Jean » Wed Jul 10, 2019 10:17 am

10:17am.............All cams at Delta2 continue to go on and off this morning.
"Volunteers do not necessarily have the time..............they have the heart"..........Elizabeth Andrew

(Member since 9/10/11)

User avatar
JudyB
Admin
Posts: 4138
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Wed Jul 10, 2019 10:28 am

Jean wrote:
Wed Jul 10, 2019 10:17 am
10:17am.............All cams at Delta2 continue to go on and off this morning.
Thanks, Jean. I've sent a message to Ken.

User avatar
Jean
Topic Assistant
Posts: 14896
Joined: Feb 19, 2018
Location: Langley, BC

Re: Report Cams Down and Forum Errors

Post by Jean » Wed Jul 10, 2019 4:14 pm

Thank you Judy!
"Volunteers do not necessarily have the time..............they have the heart"..........Elizabeth Andrew

(Member since 9/10/11)

User avatar
Jean
Topic Assistant
Posts: 14896
Joined: Feb 19, 2018
Location: Langley, BC

Re: Report Cams Down and Forum Errors

Post by Jean » Mon Jul 15, 2019 8:12 pm

8:11pm.........I've only been on the cams twice today at Delta2............the W embedded cam keeps getting spinning circles and freezes for several minutes...........comes back on eventually. Don't know how it was for our other zoomers today.

8:57pm......Both embedded cams now having spinning circles.

9:49pm..........As the night progressed the embedded cams got worse, cam controls became awful.............then as I was signing off ALL cams went off. They were off for 4 min. before coming back on.
"Volunteers do not necessarily have the time..............they have the heart"..........Elizabeth Andrew

(Member since 9/10/11)

User avatar
Sandy_W
Topic Assistant
Posts: 18012
Joined: Feb 22, 2018
Location: Arkansas

Re: Report Cams Down and Forum Errors

Post by Sandy_W » Tue Jul 16, 2019 7:56 am

7:49 am while zooming this morning at Delta at 6:55 specifically, had issues with the embedded cams going off and losing the DVR information, plus lost the zoomer cams. Honestly, it was difficult trying to follow the fledglings around in the fields when this happened. If we loose a couple of minutes of following, we lose sight of the fledglings and the DVR streaming images. And yes, that happened. In addition, when the zoomer cams lag, I am assuming this is a direct effect of the streaming. Have a question though. Is there any update on the upgrade for the fiber optic Internet connection? Haven't had any updates for this to happen. Thanks.
“Eagles: When they walk, they stumble. They are not what one would call graceful. They were not designed to walk. They fly. And when they fly, oh, how they fly, so free, so graceful. They see from the sky what we never see.” – Unknown

User avatar
JudyB
Admin
Posts: 4138
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Tue Jul 16, 2019 8:24 am

I believe that Myles is the one making arrangements for the upgrade, so I've just sent him an email asking about this.

Thank you all for all you do!

User avatar
Jean
Topic Assistant
Posts: 14896
Joined: Feb 19, 2018
Location: Langley, BC

Re: Report Cams Down and Forum Errors

Post by Jean » Tue Jul 16, 2019 9:00 am

Thank you Judy!
"Volunteers do not necessarily have the time..............they have the heart"..........Elizabeth Andrew

(Member since 9/10/11)

User avatar
Darlene
Admin
Posts: 1117
Joined: Jan 15, 2018
Location: Langley

Re: Report Cams Down and Forum Errors

Post by Darlene » Tue Jul 16, 2019 12:17 pm

12:17 Delta2 cams have been down for about 45 minutes.
Darlene, Langley, member since May 10 2006

User avatar
JudyB
Admin
Posts: 4138
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Tue Jul 16, 2019 12:23 pm

Darlene wrote:
Tue Jul 16, 2019 12:17 pm
12:17 Delta2 cams have been down for about 45 minutes.
Do you know if the zoomer links are also down?

User avatar
IrishEyes
Forum Assistant
Posts: 39170
Joined: Feb 09, 2018
Location: Nova Scotia, Canada

Post by IrishEyes » Tue Jul 16, 2019 12:26 pm

Hi Judy !..the embedded cams are down at H Mills also
screenshot_10.jpg


The zoomer cams are working !

Thanks
Bev
Image

HELPFUL HINTS...Be Respectful !....Bev...member since 08/04/09

User avatar
JudyB
Admin
Posts: 4138
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Tue Jul 16, 2019 12:36 pm

I’ve sent a text to Ken. Should be home and back online in about an hour.

User avatar
IrishEyes
Forum Assistant
Posts: 39170
Joined: Feb 09, 2018
Location: Nova Scotia, Canada

Re: Report Cams Down and Forum Errors

Post by IrishEyes » Tue Jul 16, 2019 12:40 pm

JudyB wrote:
Tue Jul 16, 2019 12:36 pm
I’ve sent a text to Ken. Should be home and back online in about an hour.


Thanks Judy!
Image

HELPFUL HINTS...Be Respectful !....Bev...member since 08/04/09

User avatar
JudyB
Admin
Posts: 4138
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Tue Jul 16, 2019 12:49 pm

There are power outages in the Vancouver area - not sure where Ken lives but the Wowza server could be down.

User avatar
JudyB
Admin
Posts: 4138
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Tue Jul 16, 2019 1:07 pm

Ken says Wowza is streaming - so if embedded cams are still down, it could be a YouTube issue. I’ll be home soon and will check then.

Post Reply

Return to “Technical Help”