Thanks Judy........hope they will be fine for a while now.JudyB wrote: ↑Wed Jul 18, 2018 10:24 am10:20 am
Looks as if they are back up now, Jean, and they've been streaming OK in the minute or two I've been watching (seconds aren't skipping on the time stamp and sound isn't going in and out). Maybe Ken did a reboot - or it may be one of those quirky things that seem to be happening with these cams.
11:33 pm
Well, that didn't last - just lost them both, though they were back a minute later (I'm just viewing the embedded cams). And for the moment they're streaming smoothly.
Report Cams Down and Forum Errors
Re: Report Cams Down and Forum Errors
"Volunteers do not necessarily have the time..............they have the heart"..........Elizabeth Andrew
(Member since 9/10/11)
(Member since 9/10/11)
Re: Report Cams Down and Forum Errors
Good Afternoon! Delta 2 cams continue to stall and go off and on.
-
- Posts: 4305
- Joined: Feb 21, 2018
- Location: England
Re: Report Cams Down and Forum Errors
19th July 2018 Delta time about 6 - 7am
The Delta cams have been off for half an hour and counting.
The Delta cams have been off for half an hour and counting.
"If you hang out with chickens, you are going to cluck and if you hang out with eagles, you are going to fly! " Dr Steve Maraboli
Re: Report Cams Down and Forum Errors
Update on Delta CamsCheryldavis wrote: ↑Thu Jul 19, 2018 6:02 am19th July 2018 Delta time about 6 - 7am
The Delta cams have been off for half an hour and counting.
Re: Report Cams Down and Forum Errors
10:25am.............Was on the zoomer cams at Delta2 for about 25 minutes.......They are working fine. But the embedded cams are off and although it usually says they last streamed "X" amount of time ago.............there is nothing like this showing this time.
"Volunteers do not necessarily have the time..............they have the heart"..........Elizabeth Andrew
(Member since 9/10/11)
(Member since 9/10/11)
Re: Report Cams Down and Forum Errors
2:15pm.....Embedded cams still down at Delta2. They have been off for hours, most of the day here.
"Volunteers do not necessarily have the time..............they have the heart"..........Elizabeth Andrew
(Member since 9/10/11)
(Member since 9/10/11)
Re: Report Cams Down and Forum Errors
I'll try rebooting one of them and see if that helps, and will check the YouTube page to see if there's a clue there. If that doesn't work, I'll call Ken.
Thanks for also sending an email - I've been out this afternoon so just getting to messages now.
2023 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
I rebooted East and it didn't help. The YouTube admin page said the stream health was good - but also said the stream was offline - which generally means the problem is not something I can fix. I called Ken, and he's taking a look.
2:51 pm
Delta 2 embedded cams are back - Thanks, Ken!
2:51 pm
Delta 2 embedded cams are back - Thanks, Ken!
2023 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
Good Evening All! I just noticed that the W Embedded Cam for Delta 2 has been offline for 22 minutes. I'm not on the cams so unsure if both zoomer cams are working but will try to log into the W Cam to check it out.
Edit: I logged into the W Zoomer cam and now the W Embedded cam is up. Unfortunately I can't stay on the cam so hoping the embedded cam stays up after I log off the zoomer cam.
Edit: I logged into the W Zoomer cam and now the W Embedded cam is up. Unfortunately I can't stay on the cam so hoping the embedded cam stays up after I log off the zoomer cam.
Re: Report Cams Down and Forum Errors
All cams down at HM at 9:35pm.
Thanks!
Thanks!
Re: Report Cams Down and Forum Errors
7:18 am
Both Harrison Mills cams are streaming with the current time; DVR suggests they've been up for about 2 hours. Thanks for posting, Yolande - not sure if Ken did something or if they came back on their own.
Both Delta 2 cams are streaming with the current time; DVR suggests they've been up for over 4 hours, so your plan may have worked, Sue.
White Rock CU and WA are streaming; North says it was live 21 minutes ago. I rebooted North, and it's now streaming, and the other two cams are still streaming.
This may be a record - all seven cams are actually working!
Both Harrison Mills cams are streaming with the current time; DVR suggests they've been up for about 2 hours. Thanks for posting, Yolande - not sure if Ken did something or if they came back on their own.
Both Delta 2 cams are streaming with the current time; DVR suggests they've been up for over 4 hours, so your plan may have worked, Sue.
White Rock CU and WA are streaming; North says it was live 21 minutes ago. I rebooted North, and it's now streaming, and the other two cams are still streaming.
This may be a record - all seven cams are actually working!
2023 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
Good Morning
Re H Mills ...
I tuned in at 10:29am and both cams are down 57mins.
Thank You !
Re H Mills ...
I tuned in at 10:29am and both cams are down 57mins.
Thank You !
Re: Report Cams Down and Forum Errors
Good Morning All! Delta 2 cams flickered/stalled a couple times and are now down. This seems to happen every Sunday....I think. The cams have come back a couple times but are stalled as soon as they come up and then they go off again. Hoping someone can do a reset or something.
Re: Report Cams Down and Forum Errors
Delta 2 and Harrison Mills cams are all up now (8:10 am); I'll watch Delta 2 for a little while and try a reboot if it's still going down (and Ken may have recently done a reboot - I think he does that if he notices that they are having issues). I'll also check the Observation thread as I see we have a zoomer - who has found an adult on a pole.
2023 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
Good Morning All! I've been on the Delta cams for about 1 1/2 hours and had no problems until just about 10 minutes ago I started having problems with them. They've gone down at least twice, but then came back about a minute or two later. The zoomer cams are currently up, but it looks like the Embedded W Cam is offline and has been for about 7 minutes, I think. Embedded E Cam seems to be okay.