Report Cams Down and Forum Errors

Report cams up/down or if you need technical assistance.
Jetsetterdavis
Posts: 4305
Joined: Feb 21, 2018
Location: England

Re: Report Cams Down and Forum Errors

Post by Jetsetterdavis » Sun Jul 01, 2018 3:40 am

1/7/18 (July 1st) Delta cams crashed at 2.30am and have not reset themselves except for a brief moment. Zoomer cams also down
"If you hang out with chickens, you are going to cluck and if you hang out with eagles, you are going to fly! " Dr Steve Maraboli

User avatar
JudyB
Admin
Posts: 17996
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Sun Jul 01, 2018 9:51 am

Sorry I'm late getting here today - and the Delta embedded cams look OK now, at 9:50 am.

User avatar
IrishEyes
Forum Assistant
Posts: 120408
Joined: Feb 09, 2018
Location: Nova Scotia, Canada

Re: Report Cams Down and Forum Errors

Post by IrishEyes » Sun Jul 01, 2018 11:57 am

SUNDAY, JULY 1, 2018

Good Afternoon .

I do'n't know if this is the right place to ask this but Judy B do you have any ideas why the DVR on the S Cam only rolls back 2 hours and on the N Cam it rolls back 4 hours ...Yolande noticed it last night and it happened to me also the other day and I thought maybe it was because the S Cam was stopping and going ..

It would be great to have the S Cam the same as the N Cam esp. when we miss an eagle visit ..... as the S Cam is better to see who was who on the nest .... does this make sense ? Thoughts?

Thank You

Bev

PS.. No rush to reapond !
Image

HELPFUL HINTS.......Bev...member since 08/04/09

User avatar
IrishEyes
Forum Assistant
Posts: 120408
Joined: Feb 09, 2018
Location: Nova Scotia, Canada

Re: Report Cams Down and Forum Errors

Post by IrishEyes » Sun Jul 01, 2018 1:43 pm

Hi Again

Re H Mills

1:34pm ..I was zooming and both cams are off line,,it was strange the S cam went to the nest while I was zooming out front!

screenshot_23.jpg
I lost the SPTZ zoomer cam also.


1:38pm
N Cam is back and S is down
screenshot_25.jpg
1:46pm... I am still unable to get the S Direct Access ( zoomer Cam )
Image

HELPFUL HINTS.......Bev...member since 08/04/09

User avatar
IrishEyes
Forum Assistant
Posts: 120408
Joined: Feb 09, 2018
Location: Nova Scotia, Canada

Re: Report Cams Down and Forum Errors

Post by IrishEyes » Sun Jul 01, 2018 2:38 pm

2:33pm
Re H Mills !

Thanks the S Embedded Cam at H Mills is back and I am able to get the S Direct access sooner cam !
Image

HELPFUL HINTS.......Bev...member since 08/04/09

User avatar
JudyB
Admin
Posts: 17996
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Sun Jul 01, 2018 3:05 pm

IrishEyes wrote:
Sun Jul 01, 2018 11:57 am
SUNDAY, JULY 1, 2018

Good Afternoon .

I do'n't know if this is the right place to ask this but Judy B do you have any ideas why the DVR on the S Cam only rolls back 2 hours and on the N Cam it rolls back 4 hours ...Yolande noticed it last night and it happened to me also the other day and I thought maybe it was because the S Cam was stopping and going ..

It would be great to have the S Cam the same as the N Cam esp. when we miss an eagle visit ..... as the S Cam is better to see who was who on the nest .... does this make sense ? Thoughts?

Thank You

Bev

PS.. No rush to reapond !
Good question, Bev - and at this point I'm guessing it's related to the stopping and going. I looked at the admin settings in YouTube, and there's a place to turn the DVR option on and off, but I was unable to find anywhere to change the length of it.

User avatar
IrishEyes
Forum Assistant
Posts: 120408
Joined: Feb 09, 2018
Location: Nova Scotia, Canada

Re: Report Cams Down and Forum Errors

Post by IrishEyes » Sun Jul 01, 2018 3:38 pm

JudyB wrote:
Sun Jul 01, 2018 3:05 pm
IrishEyes wrote:
Sun Jul 01, 2018 11:57 am
SUNDAY, JULY 1, 2018

Good Afternoon .

I do'n't know if this is the right place to ask this but Judy B do you have any ideas why the DVR on the S Cam only rolls back 2 hours and on the N Cam it rolls back 4 hours ...Yolande noticed it last night and it happened to me also the other day and I thought maybe it was because the S Cam was stopping and going ..

It would be great to have the S Cam the same as the N Cam esp. when we miss an eagle visit ..... as the S Cam is better to see who was who on the nest .... does this make sense ? Thoughts?

Thank You

Bev

PS.. No rush to reapond !
Good question, Bev - and at this point I'm guessing it's related to the stopping and going. I looked at the admin settings in YouTube, and there's a place to turn the DVR option on and off, but I was unable to find anywhere to change the length of it.
Thanks Judy........ Please take your time ... no rush for this.. :huggie:
Image

HELPFUL HINTS.......Bev...member since 08/04/09

User avatar
SueB
Zoomer
Posts: 47537
Joined: Feb 20, 2018
Location: SW Florida

Re: Report Cams Down and Forum Errors

Post by SueB » Mon Jul 02, 2018 8:04 am

Good Morning All! Delta 2 cams are currently down and have been going off and on for the last 15 minutes now. Could be due to the high winds but just thought I'd mention it. Both PTZ and Embedded cams are down now.

User avatar
SueB
Zoomer
Posts: 47537
Joined: Feb 20, 2018
Location: SW Florida

Re: Report Cams Down and Forum Errors

Post by SueB » Mon Jul 02, 2018 8:42 am

SueB wrote:
Mon Jul 02, 2018 8:04 am
Good Morning All! Delta 2 cams are currently down and have been going off and on for the last 15 minutes now. Could be due to the high winds but just thought I'd mention it. Both PTZ and Embedded cams are down now.
Delta cams continued to be off for the most part, and have only been coming up for a few seconds then off again.

Update: Cams have been down since 8:29 am and have not come back yet.

User avatar
IrishEyes
Forum Assistant
Posts: 120408
Joined: Feb 09, 2018
Location: Nova Scotia, Canada

Re: Report Cams Down and Forum Errors

Post by IrishEyes » Mon Jul 02, 2018 2:52 pm

Re Harrison Mills


2:49pm
The S Embedded cam has pinning circle .. I do refresh the cams and that helps for a little while ..
screenshot_19.jpg
The S Direct Access cam is fine

Thank you
Bev
Image

HELPFUL HINTS.......Bev...member since 08/04/09

User avatar
JudyB
Admin
Posts: 17996
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Mon Jul 02, 2018 3:31 pm

I'll try a reboot. Maybe that will help with the dvr issue as well.

User avatar
Sandy_W
Topic Assistant
Posts: 56659
Joined: Feb 22, 2018
Location: Arkansas

Re: Report Cams Down and Forum Errors

Post by Sandy_W » Tue Jul 03, 2018 6:35 am

Delta 2 east and west zoomer cams going off line with the embedded cams. Happened last night and again this morning at around 6:30 am.
“Eagles: When they walk, they stumble. They are not what one would call graceful. They were not designed to walk. They fly. And when they fly, oh, how they fly, so free, so graceful. They see from the sky what we never see.” – Unknown

Jetsetterdavis
Posts: 4305
Joined: Feb 21, 2018
Location: England

Re: Report Cams Down and Forum Errors

Post by Jetsetterdavis » Tue Jul 03, 2018 8:06 am

8.01 Cams down and Zoom cams off too
"If you hang out with chickens, you are going to cluck and if you hang out with eagles, you are going to fly! " Dr Steve Maraboli

User avatar
JudyB
Admin
Posts: 17996
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Tue Jul 03, 2018 8:30 am

8:29 am
Delta embedded cams are back - Ken may have noticed and given them a reboot.

Jetsetterdavis
Posts: 4305
Joined: Feb 21, 2018
Location: England

Re: Report Cams Down and Forum Errors

Post by Jetsetterdavis » Tue Jul 03, 2018 8:46 am

JudyB wrote:
Tue Jul 03, 2018 8:30 am
8:29 am
Delta embedded cams are back - Ken may have noticed and given them a reboot.
Yes they didn't stay down long. Thank you
"If you hang out with chickens, you are going to cluck and if you hang out with eagles, you are going to fly! " Dr Steve Maraboli

Post Reply

Return to “Technical Help”