Report Cams Down and Forum Errors
Re: Report Cams Down and Forum Errors
12:10pm The West embedded cam just went down at Delta2 East embedded cam has been down for a while now...
Both PTZ cams are up and fine...
Thanks!
Both PTZ cams are up and fine...
Thanks!
Re: Report Cams Down and Forum Errors
Hi again...the North embedded cam at Harrison Mills is also down...
ADD: South embedded cam at HM is down too..
Thanks!
ADD: South embedded cam at HM is down too..
Thanks!
Re: Report Cams Down and Forum Errors
I've heard from Ken. There's an issue with the Wowza server, which I believe sends the signals to YouTube. He's not able to contact it directly, so is getting in touch with someone at the facility where the server is housed to see if they can reboot it manually.
He said that it may take a while to get it working correctly and all the streams going where they should go.
It should be fine for zoomers to be logged in and posting images using the direct access links - though it's possible you'll see the cams reboot once he's starting to get things streaming again.
He said that it may take a while to get it working correctly and all the streams going where they should go.
It should be fine for zoomers to be logged in and posting images using the direct access links - though it's possible you'll see the cams reboot once he's starting to get things streaming again.
2019 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
Thank you Judy for the update and thank you Ken!
Darlene, Langley, member since May 10 2006
Re: Report Cams Down and Forum Errors
7:11pm
Re H Mills ..
Hi everyone
Both embedded cams are streaming at H Mills and thank you so much Ken.
Correction .. Time is wrong on the S Cam
Re H Mills ..
Hi everyone
Both embedded cams are streaming at H Mills and thank you so much Ken.

Correction .. Time is wrong on the S Cam
Re: Report Cams Down and Forum Errors
I think Ken may still be working on things. I just checked and the following embedded cams seem to be streaming now:
Delta 2 West
Harrison Mills North
White Rock North
I tried rebooting Harrison Mills South, but that didn't jump-start the embedded cam, which makes me suspect that Ken may have to do some work with each individual stream to get it hooked up again to the Wowza server so it can be sent to YouTube, and has started with one cam from each nest.
A big thanks to Ken for all the time he's putting in on this!
Delta 2 West
Harrison Mills North
White Rock North
I tried rebooting Harrison Mills South, but that didn't jump-start the embedded cam, which makes me suspect that Ken may have to do some work with each individual stream to get it hooked up again to the Wowza server so it can be sent to YouTube, and has started with one cam from each nest.
A big thanks to Ken for all the time he's putting in on this!
2019 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
7:31 am for Delta 2 east cam, this cam has been offline since sometime last night.
“Eagles: When they walk, they stumble. They are not what one would call graceful. They were not designed to walk. They fly. And when they fly, oh, how they fly, so free, so graceful. They see from the sky what we never see.” – Unknown
Re: Report Cams Down and Forum Errors
9:09 am
I just got off the phone with Ken, and all the embedded cams should be streaming now except Harrison Mills South, and he's working on that next. You may need to refresh/reload the page.
Thank you, Ken!
I just got off the phone with Ken, and all the embedded cams should be streaming now except Harrison Mills South, and he's working on that next. You may need to refresh/reload the page.
Thank you, Ken!
2019 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
1:27 pm - Delta 2 Cams all went down at this time. I was on the zoomer cams at the time and W Cam is on the nest, but E Cam is slightly off as I was trying to following one of the adults when the cams went down. The W Cam zoomer screen gave me this error message.
Edit: Cams came back long enough for me to get the E Cam back on the nest but they are going off and on again so I will log out of the zoomer cams when I can.
Edit: Cams came back long enough for me to get the E Cam back on the nest but they are going off and on again so I will log out of the zoomer cams when I can.
Re: Report Cams Down and Forum Errors
THURSDAY , JUNE 28, 2018
Good Afternoon
'
Re Harrison Mils
10:59am...... The S embedded cam has a spinning circle .. maybe a roboot will help.. it does however come back if I refresh the cams , but it doesn't last ..
The S PTZ Cam is working well
T hank You
Bev
Good Afternoon
'
Re Harrison Mils
10:59am...... The S embedded cam has a spinning circle .. maybe a roboot will help.. it does however come back if I refresh the cams , but it doesn't last ..

The S PTZ Cam is working well
T hank You
Bev
Re: Report Cams Down and Forum Errors
I just brought up the embedded cams, and it's working now - will watch it for a while and do a reboot if it goes to the spinning circle again.IrishEyes wrote: ↑Thu Jun 28, 2018 11:06 amTHURSDAY , JUNE 28, 2018
Good Afternoon
'
Re Harrison Mils
10:59am...... The S embedded cam has a spinning circle .. maybe a roboot will help.. it does however come back if I refresh the cams , but it doesn't last ..![]()
The S PTZ Cam is working well
T hank You
Bev
screenshot_01.jpg
2019 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
Thanks Judy they seem to be working fine now !JudyB wrote: ↑Thu Jun 28, 2018 2:40 pmI just brought up the embedded cams, and it's working now - will watch it for a while and do a reboot if it goes to the spinning circle again.IrishEyes wrote: ↑Thu Jun 28, 2018 11:06 amTHURSDAY , JUNE 28, 2018
Good Afternoon
'
Re Harrison Mils
10:59am...... The S embedded cam has a spinning circle .. maybe a roboot will help.. it does however come back if I refresh the cams , but it doesn't last ..![]()
The S PTZ Cam is working well
T hank You
Bev
screenshot_01.jpg
Re: Report Cams Down and Forum Errors
Good Evening! The E Embedded Cam for Delta 2 went down at 8:30 pm. Both zoomer cams are working and the W Embedded cam is also working, so it's just the E Embedded cam that is down.....like a few days ago.
Re: Report Cams Down and Forum Errors
Thanks, Sue. It's looking OK now, so I'm guessing Ken rebooted something.
Please do feel free to send me a PM or an email if you don't see me online when there is a cam issue or you'd like one of the cams rebooted - I may not see that for a while either, but I usually do see those sooner. Thanks!
Please do feel free to send me a PM or an email if you don't see me online when there is a cam issue or you'd like one of the cams rebooted - I may not see that for a while either, but I usually do see those sooner. Thanks!
2019 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
WHITE ROCK CAMS: Zooming is Stop and go , jerky and says buffering , so maybe a reboot is called for all 3 cams



Re: Report Cams Down and Forum Errors
Forgot to post here, but I rebooted the White Rock cams.
2019 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
-
- Topic Assistant
- Posts: 4183
- Joined: Feb 21, 2018
- Location: England
Re: Report Cams Down and Forum Errors
1/7/18 (July 1st) Delta cams crashed at 2.30am and have not reset themselves except for a brief moment. Zoomer cams also down
"If you hang out with chickens, you are going to cluck and if you hang out with eagles, you are going to fly! " Dr Steve Maraboli
Re: Report Cams Down and Forum Errors
Sorry I'm late getting here today - and the Delta embedded cams look OK now, at 9:50 am.
2019 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
SUNDAY, JULY 1, 2018
Good Afternoon .
I do'n't know if this is the right place to ask this but Judy B do you have any ideas why the DVR on the S Cam only rolls back 2 hours and on the N Cam it rolls back 4 hours ...Yolande noticed it last night and it happened to me also the other day and I thought maybe it was because the S Cam was stopping and going ..
It would be great to have the S Cam the same as the N Cam esp. when we miss an eagle visit ..... as the S Cam is better to see who was who on the nest .... does this make sense ? Thoughts?
Thank You
Bev
PS.. No rush to reapond !
Good Afternoon .
I do'n't know if this is the right place to ask this but Judy B do you have any ideas why the DVR on the S Cam only rolls back 2 hours and on the N Cam it rolls back 4 hours ...Yolande noticed it last night and it happened to me also the other day and I thought maybe it was because the S Cam was stopping and going ..
It would be great to have the S Cam the same as the N Cam esp. when we miss an eagle visit ..... as the S Cam is better to see who was who on the nest .... does this make sense ? Thoughts?
Thank You
Bev
PS.. No rush to reapond !
Re: Report Cams Down and Forum Errors
Hi Again
Re H Mills
1:34pm ..I was zooming and both cams are off line,,it was strange the S cam went to the nest while I was zooming out front!
I lost the SPTZ zoomer cam also.
1:38pm
N Cam is back and S is down 1:46pm... I am still unable to get the S Direct Access ( zoomer Cam )
Re H Mills
1:34pm ..I was zooming and both cams are off line,,it was strange the S cam went to the nest while I was zooming out front!
I lost the SPTZ zoomer cam also.
1:38pm
N Cam is back and S is down 1:46pm... I am still unable to get the S Direct Access ( zoomer Cam )
Re: Report Cams Down and Forum Errors
2:33pm
Re H Mills !
Thanks the S Embedded Cam at H Mills is back and I am able to get the S Direct access sooner cam !
Re H Mills !
Thanks the S Embedded Cam at H Mills is back and I am able to get the S Direct access sooner cam !
Re: Report Cams Down and Forum Errors
Good question, Bev - and at this point I'm guessing it's related to the stopping and going. I looked at the admin settings in YouTube, and there's a place to turn the DVR option on and off, but I was unable to find anywhere to change the length of it.IrishEyes wrote: ↑Sun Jul 01, 2018 11:57 amSUNDAY, JULY 1, 2018
Good Afternoon .
I do'n't know if this is the right place to ask this but Judy B do you have any ideas why the DVR on the S Cam only rolls back 2 hours and on the N Cam it rolls back 4 hours ...Yolande noticed it last night and it happened to me also the other day and I thought maybe it was because the S Cam was stopping and going ..
It would be great to have the S Cam the same as the N Cam esp. when we miss an eagle visit ..... as the S Cam is better to see who was who on the nest .... does this make sense ? Thoughts?
Thank You
Bev
PS.. No rush to reapond !
2019 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
Thanks Judy........ Please take your time ... no rush for this..JudyB wrote: ↑Sun Jul 01, 2018 3:05 pmGood question, Bev - and at this point I'm guessing it's related to the stopping and going. I looked at the admin settings in YouTube, and there's a place to turn the DVR option on and off, but I was unable to find anywhere to change the length of it.IrishEyes wrote: ↑Sun Jul 01, 2018 11:57 amSUNDAY, JULY 1, 2018
Good Afternoon .
I do'n't know if this is the right place to ask this but Judy B do you have any ideas why the DVR on the S Cam only rolls back 2 hours and on the N Cam it rolls back 4 hours ...Yolande noticed it last night and it happened to me also the other day and I thought maybe it was because the S Cam was stopping and going ..
It would be great to have the S Cam the same as the N Cam esp. when we miss an eagle visit ..... as the S Cam is better to see who was who on the nest .... does this make sense ? Thoughts?
Thank You
Bev
PS.. No rush to reapond !

Re: Report Cams Down and Forum Errors
Good Morning All! Delta 2 cams are currently down and have been going off and on for the last 15 minutes now. Could be due to the high winds but just thought I'd mention it. Both PTZ and Embedded cams are down now.
Re: Report Cams Down and Forum Errors
Delta cams continued to be off for the most part, and have only been coming up for a few seconds then off again.
Update: Cams have been down since 8:29 am and have not come back yet.
Re: Report Cams Down and Forum Errors
Re Harrison Mills
2:49pm
The S Embedded cam has pinning circle .. I do refresh the cams and that helps for a little while .. The S Direct Access cam is fine
Thank you
Bev
2:49pm
The S Embedded cam has pinning circle .. I do refresh the cams and that helps for a little while .. The S Direct Access cam is fine
Thank you
Bev
Re: Report Cams Down and Forum Errors
I'll try a reboot. Maybe that will help with the dvr issue as well.
2019 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
Delta 2 east and west zoomer cams going off line with the embedded cams. Happened last night and again this morning at around 6:30 am.
“Eagles: When they walk, they stumble. They are not what one would call graceful. They were not designed to walk. They fly. And when they fly, oh, how they fly, so free, so graceful. They see from the sky what we never see.” – Unknown
-
- Topic Assistant
- Posts: 4183
- Joined: Feb 21, 2018
- Location: England
Re: Report Cams Down and Forum Errors
8.01 Cams down and Zoom cams off too
"If you hang out with chickens, you are going to cluck and if you hang out with eagles, you are going to fly! " Dr Steve Maraboli
Re: Report Cams Down and Forum Errors
8:29 am
Delta embedded cams are back - Ken may have noticed and given them a reboot.
Delta embedded cams are back - Ken may have noticed and given them a reboot.
2019 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints