Report Cams Down and Forum Errors
Re: Report Cams Down and Forum Errors
9:56am............The cams at Delta2 were a constant problem last night..........all of them going off and on frequently. Embedded cams get that spinning circle, zoomer cams freeze, go black then disappear. Sometimes they need to be reloaded before one can see them again after they have come back on (both embedded ones and zoomers). This morning the problem still seems to be there.
"Volunteers do not necessarily have the time..............they have the heart"..........Elizabeth Andrew
(Member since 9/10/11)
(Member since 9/10/11)
Re: Report Cams Down and Forum Errors
Is anyone else having a problem with the forum itself? I am on the Delta zoomer cams and they are running fine, and the embedded cams too, but I'm trying to post on the forum and it stops dead at times and when I can get a post window to come up the s'caps are taking forever to load on there. Maybe it's me, but even if I close out of that tab and start a new one it takes forever for the forum to come up.
Re: Report Cams Down and Forum Errors
Thanks for reporting here, Sue - and I've noticed something similar as have some other folks, and I've sent a message to David Hathaway, but it is the weekend so he may not see it until morning. Hopefully things will be sorted out tomorrow if not before.
2020 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
Just adding ..... I tried to check the forum this morning at 5:30 a.m. and the website wasn't coming up at all at that time.
Judy (jkr) - member since 2006
Need Help ? Check our HELPFUL HINTS
Re: Report Cams Down and Forum Errors
David Hathaway has tried to recreate this a couple of times, but so far the forum has been working normally when he checked. I haven't heard from him again yet this morning - but it is still early in BC.
2020 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
David Hathaway eventually got everything working yesterday - but the forum just went down at around 12:20; I sent a message and found that David was already working on it, and it came back around 12:40 pm.
2020 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
I just had a problem with Firefox not loading a page properly. I had the most recent update of the browser and when I went to sign onto the Hancock site I got a page that looked like this.
Thank you Judy B for your fast reply.

I did 2 things to correct it. I went back to the previous version of Firefox. I deleted my browsing history and then I updated Firefox again. This is what it should and did look like.
If my fix isn't permanent I will be back with updates.Thank you Judy B for your fast reply.


In an eagle there is all the wisdom of the world. Lame Deer
Re: Report Cams Down and Forum Errors
Thanks for posting here in case others are having this issue, jwin - and hopefully it will stay fixed now that you've fixed it!
2020 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
Re Harrison Mills.
6:46pm
Both embedded cams have spinning circle and are cutting out .
maybe a reboot will solve the problem
Both Direct Access zoomer cams are fine,.
Thanks Bev
6:46pm
Both embedded cams have spinning circle and are cutting out .
maybe a reboot will solve the problem
Both Direct Access zoomer cams are fine,.
Thanks Bev
-
- Topic Assistant
- Posts: 4183
- Joined: Feb 21, 2018
- Location: England
Re: Report Cams Down and Forum Errors
Delta cams have been down for half an hour now. 21/6/18 (june 21st)
It must be about 3am at Delta.
It must be about 3am at Delta.
"If you hang out with chickens, you are going to cluck and if you hang out with eagles, you are going to fly! " Dr Steve Maraboli
Re: Report Cams Down and Forum Errors
Thank you David Hathaway!

Darlene, Langley, member since May 10 2006
Re: Report Cams Down and Forum Errors
Delta2 cams keep going down including the ptz cams.
Darlene, Langley, member since May 10 2006
Re: Report Cams Down and Forum Errors
Thanks for posting, Darlene. East cam is streaming now (nothing I did, though Ken might have done a reboot). The West cam itself is fine when I log in using the zoomie link, and when I log into YouTube with the admin account it says that the stream health is good (which should mean they are getting a strong signal from the cam) - but their window is showing that the live stream is offline. I did reboot the West cam while I was logged in as that sometimes clears things at YouTube - but I don't know anything else to try. I have sent an email to Ken, and hopefully he has more tricks up his sleeve than I do!
2020 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
9:19am Delta 2 WEST embedded Live Stream is offline
A lot of people have heard about the bald eagle, but you don't really appreciate the majestic nature of a bald eagle until you actually get to view one. - Scott Root
Re: Report Cams Down and Forum Errors
Sorry - I should have posted this here as well as on the Delta thread.
JudyB wrote: ↑Thu Jun 21, 2018 11:23 am11:14 am
I just got off the phone with Ken - he's going to check the server and other stuff along the way between the West cam and our embedded cam page - but like me, he thinks it may be an issue with Google, and neither of us are sure how we ask them to check that.
He rebooted the cams a half hour ago, and I rebooted West a few minutes ago - and it's still not working.
Chicks are hanging out in the nest - and one just got some great height while flapping.
I need to be away from the computer for a while (we'll have a little domestic crisis if I don't make it to the store for the cat's favorite treats!) - will check back in a couple of hours.
2020 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
Ken got the West embedded cam working late yesterday (Thursday) - thanks for all your work on this, Ken - and I hope you have a relaxing day today!
2020 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
Hi everyone! We had a major forum glitch last night - the software decided to ban everyone, so no one could read the forum, to say nothing of being able to post.
As many of you know, we've had some issues with the forum being slow lately, and occasionally going offline briefly - and my understanding is that one of the changes we made to address that was not compatible with some of the other things we've done over time - and this was the result.
Our primary forum tech person, David Hathaway, has now unbanned everyone and has the forum up and running again, and we are all hoping that everything will continue to run smoothly for at least the next few months.
If you do notice anything unusual in the next day or two, please post here, or email me (judyb at hancockwildlife dot org) or one of the other admins.
Thank you all for your patience - and happy eagle watching!
As many of you know, we've had some issues with the forum being slow lately, and occasionally going offline briefly - and my understanding is that one of the changes we made to address that was not compatible with some of the other things we've done over time - and this was the result.
Our primary forum tech person, David Hathaway, has now unbanned everyone and has the forum up and running again, and we are all hoping that everything will continue to run smoothly for at least the next few months.
If you do notice anything unusual in the next day or two, please post here, or email me (judyb at hancockwildlife dot org) or one of the other admins.
Thank you all for your patience - and happy eagle watching!
2020 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
-
- Topic Assistant
- Posts: 4183
- Joined: Feb 21, 2018
- Location: England
Re: Report Cams Down and Forum Errors
24/6/18 Delta Cams have been down all night and are still down.
"If you hang out with chickens, you are going to cluck and if you hang out with eagles, you are going to fly! " Dr Steve Maraboli
Re: Report Cams Down and Forum Errors
12:36 pm - Delta 2 cams all went down.....still down at 12:46 pm.
Re: Report Cams Down and Forum Errors
1:06 pm
Thanks, Cheryle and Sue!
I just got here, and it looks as if they're back now - maybe Ken did a reboot.
Thanks, Cheryle and Sue!
I just got here, and it looks as if they're back now - maybe Ken did a reboot.
2020 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
9:23pm.........Horrible conditions tonight at Delta2 with cams going off and on..........spinning circles on the embedded cams which are currently running about 12 minutes behind real time.
"Volunteers do not necessarily have the time..............they have the heart"..........Elizabeth Andrew
(Member since 9/10/11)
(Member since 9/10/11)
Re: Report Cams Down and Forum Errors
Sorry I'm late getting here this morning. Both embedded cams are currently streaming at real time.
2020 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
12:25pm........Cams still going off and on at Delta2. And for several days now the controls on the cams have been very difficult to use........one pushes on the button, but the cam hesitates to move.........then it does move, then suddenly stops and one needs to continue pushing the button to get it to go.
"Volunteers do not necessarily have the time..............they have the heart"..........Elizabeth Andrew
(Member since 9/10/11)
(Member since 9/10/11)
Re: Report Cams Down and Forum Errors
WHITE ROCK :CLOSE UP, live streaming is behind 3 hours. 

The decent people need to keep being decent. The loving people need to keep loving. The polite people need to keep being polite. Whatever is good don't let it slide , anti it up , spread it around, make it visible.
Re: Report Cams Down and Forum Errors
Looks OK now, DDuckies - I'm guessing Ken noticed and gave it a reboot!
2020 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
6/26/18 4:56 am from Delta 2, I am not able to see the embedded east cam from the HW site or youtube. It is holding at yesterday's and last night's view. See the s'caps. Thinking it maybe my computer, I cleared history and cookies etc without any improvement. I used google browsing settings and CCcleaner to clear, plus restarted computer to reset. So wanted to check if in fact the east cam is not streaming or could it be another computer setting I need to change. Thanks....SandyW
“Eagles: When they walk, they stumble. They are not what one would call graceful. They were not designed to walk. They fly. And when they fly, oh, how they fly, so free, so graceful. They see from the sky what we never see.” – Unknown
Re: Report Cams Down and Forum Errors
I just wanted to add to Sandy's post that both zoomer cams are working. It's just the E Embedded cam that is not streaming to YouTube.Sandy_W wrote: ↑Tue Jun 26, 2018 5:11 am6/26/18 4:56 am from Delta 2, I am not able to see the embedded east cam from the HW site or youtube. It is holding at yesterday's and last night's view. See the s'caps. Thinking it maybe my computer, I cleared history and cookies etc without any improvement. I used google browsing settings and CCcleaner to clear, plus restarted computer to reset. So wanted to check if in fact the east cam is not streaming or could it be another computer setting I need to change. Thanks....SandyW
2018-06-26_7-04-50.jpg2018-06-26_7-07-18.jpg
Re: Report Cams Down and Forum Errors
Good Morning All! I just wanted to see if there was any update on the Delta E Cam (Embedded cam) issue with YouTube not streaming. Since we only have the W Cam streaming and recording it makes it extremely tough to keep an eye on these eaglets that are branching and Ma & UME off the nest....having to keep an eye on the E zoomer cam constantly is tough, and remembering to take s'caps from there as action is happening. I am so dependent on the rollback and I already forgot today to take a s'cap as Dusk was flapping h/h wings on the branch and only the E Cam was on him at the time. Plus, from past experience, if I go in and out of full screen on the zoomer screen too much the cams go down on my end so that's a problem for me. I know that's too much whining this early in the morning. I really appreciate all that you do!



Re: Report Cams Down and Forum Errors
I can't get the Delta2 East embedded cam. It is rolled back to June 25 23:35 and I can't get it to go past that. I got in to the ptz east ok.
Darlene, Langley, member since May 10 2006
Re: Report Cams Down and Forum Errors
I'll try rebooting the East cam.
10:29 am
Reboot didn't work. I called Ken and he's checking the path between the cam and YouTube to find out what's not working and get it working again.
10:29 am
Reboot didn't work. I called Ken and he's checking the path between the cam and YouTube to find out what's not working and get it working again.
2020 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints