Report Cams Down and Forum Errors
Re: Report Cams Down and Forum Errors
Good morning! The Harrison Mills cams are down again this morning. They came up at some point but have been down now for 98 minutes.
Darlene, Langley, member since May 10 2006
Re: Report Cams Down and Forum Errors
7:35 am - Delta 2 Cams are all down. I logged into the cams around 7:02 am and within 15 minutes they went down three times. I have since logged off, both cams are on the nest at this time.
Re: Report Cams Down and Forum Errors
The Delta cams are streaming for me at 8:36 a.m.
I will let Ken know that the Harrison cams are still down.Judy (jkr) - member since 2006
Need Help ? Check our HELPFUL HINTS
Re: Report Cams Down and Forum Errors
3:21pm
just checked in to see how the little one is doing and Harrison cams are down.
just checked in to see how the little one is doing and Harrison cams are down.
Re: Report Cams Down and Forum Errors
The Harrison Mills cams have been down all day except for 2 5 minute spurts. The second time just long enough to see a brand new eaglet out from under dad and tangled a bit in moss. We have no way of knowing if fish are coming in with the river being so high. Something needs to be done. This frustrating and embarrassing.
Darlene, Langley, member since May 10 2006
-
- Posts: 4305
- Joined: Feb 21, 2018
- Location: England
Re: Report Cams Down and Forum Errors
3.56 am (Delta time) The Delta cams are cycling on and off.
7.19 cams cycled on and off the forum and the zoomer cams stayed up but were frozen and then very sluggish to respond so have logged out.
7.19 cams cycled on and off the forum and the zoomer cams stayed up but were frozen and then very sluggish to respond so have logged out.
"If you hang out with chickens, you are going to cluck and if you hang out with eagles, you are going to fly! " Dr Steve Maraboli
Re: Report Cams Down and Forum Errors
The Harrison Mills south cam says it's live, but it's not. It's currently 6:14 a.m. local time, but the time on the south camera says 5:33 a.m. I also see a spinning white circle.
Re: Report Cams Down and Forum Errors
Thanks, Sue! I've rebooted the South cam, and it's now streaming live and at the current time.
2023 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
2:34 pm - Delta 2 Cams (both Zoomer & Embedded) went down 3 or 4 times, three of those times were one right after the other when they went down, came up again, then went down again. Luckily the last time they came back I had enough time to get the W Cam back on the nest so they are now both on the nest, and I am logged off.
-
- Posts: 4305
- Joined: Feb 21, 2018
- Location: England
Re: Report Cams Down and Forum Errors
9.41am The Delta cams both froze, went off then reloaded whilst I was zooming, so I logged off once I got them back They were freezing just prior to going off.
"If you hang out with chickens, you are going to cluck and if you hang out with eagles, you are going to fly! " Dr Steve Maraboli
Re: Report Cams Down and Forum Errors
Hi...the South embedded cam is down for me at HM. I thought I had got it up before I left over an hour ago, but the time on the cam still shows 2:41pm and I am getting the dreaded spinning circle.
Thanks..
Thanks..
Re: Report Cams Down and Forum Errors
6pm Nest Time ..
I am getting the same as Yolande ...H Mills south has a spinning circle..
I am getting the same as Yolande ...H Mills south has a spinning circle..
Re: Report Cams Down and Forum Errors
8pm... The South Embedded Cam at H Mill is streaming and time is correct !
Re: Report Cams Down and Forum Errors
Delta 2 Cams going off and on. I had logged into the zoomer cams at 2:05 pm and at 2:17 pm the cams went down, along with the embedded cams. They came back but then went off and on several more times. I eventually got both cams back on the nest around 2:30 (had to wait for the cams to come back but they didn't stay on long enough for me to get them back properly on the nest). I am now off the cams.
Re: Report Cams Down and Forum Errors
Hi - the South embedded cam at HM is down again....spinning circles. Time on the cam shows 3:33pm so guess it has been down since then.
Thanks!
Thanks!