Report Cams Down and Forum Errors
Re: Report Cams Down and Forum Errors
Delta 2 W Embedded Cam
Just an FYI that the Delta 2 W Embedded cam came back online at 3:23 pm today. The E Cam is still offline.
Just an FYI that the Delta 2 W Embedded cam came back online at 3:23 pm today. The E Cam is still offline.
Re: Report Cams Down and Forum Errors
The settings for stream 1 at Delta 2 East are much higher than we usually have them (stream 1 is the window the zoomers see); I'm not sure if Ken did that intentionally and I'm afraid I am not going to be able to follow up on that until tomorrow - sorry.Jean wrote: ↑Wed Sep 23, 2020 12:20 pm12:19pm........At Delta2..........embedded cams still down but I noticed this on the zoomer cams.............date and time on the upper left has changed to very small on the E cam. And the E cam viewing window takes up most of the box whereas the W cam window does not.
1.JPG2.JPG
I did post on my Facebook page asking if anyone had suggestions (I have some techie friends) - there have been some replies, and I'll look at that tomorrow as well.
Good night, everyone.
PS - thanks for the note about the other cams using YouTube, Bev - I never can think of any to check when I need them.
2023 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
Good Morning All! I just wanted to add this here about the resolution on the Delta 2 W Embedded cam. Judy has already responded to this as I had also posted on the Delta thread. The highest resolution on the W Embedded cam is 720p.....previously it was at 1080p. But the good news is that the W Embedded cam is up so that others can watch the nest if they want to and we can use the rollback to check to see if any visitors come to the nest.
Re: Report Cams Down and Forum Errors
Good News Thank you Judy and Ken !
The S Embedded Cam is streaming at H Mills and Dad is back with thanks to Yolande viewtopic.php?p=377148#p377148
ETA
Thank you Sue. The resolution at H Mills was always 720 that I know off
The S Embedded Cam is streaming at H Mills and Dad is back with thanks to Yolande viewtopic.php?p=377148#p377148
ETA
Thank you Sue. The resolution at H Mills was always 720 that I know off
Re: Report Cams Down and Forum Errors
Just an FYI that the Delta 2 E Embedded cam is back online. It came up a few hours ago and the resolution is at 1080p.
Thanks to everyone that has been working on getting our cams back online!
Thanks to everyone that has been working on getting our cams back online!
Re: Report Cams Down and Forum Errors
3:34pm......Resolution on the W embedded cam at Delta is 720........... E embedded cam is 1080.
Zoomer cams: W cam is ok.......as normal. but the E zoomer cam has small print for the date and time on the upper left............
Zoomer cams: W cam is ok.......as normal. but the E zoomer cam has small print for the date and time on the upper left............
"Volunteers do not necessarily have the time..............they have the heart"..........Elizabeth Andrew
(Member since 9/10/11)
(Member since 9/10/11)
Re: Report Cams Down and Forum Errors
Ken gave me permission to change the settings for Stream 1, which is what is sent to the window the zoomers use - so now E zoomer is back to normal.
At this point Ken is basically tweaking the settings on each cam until he can get the embedded version streaming. He also thinks YouTube may be fixing some of the issues. Unfortunately this will take some time.
It's now about 4:30 pm, and both Delta embedded cams are streaming, and Harrison South embedded is streaming. White Rock CU was streaming for a while, but is now stuck with a spinning circle at 11:30 pm.
2023 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
Thanks Judy!
"Volunteers do not necessarily have the time..............they have the heart"..........Elizabeth Andrew
(Member since 9/10/11)
(Member since 9/10/11)
Re: Report Cams Down and Forum Errors
SATURDAY , SEPT. 26, 2020
FYI
You Tube is streaming well on the Pittsburgh Hays Eagle nest...'
I opened the New Thread this morning
FYI
You Tube is streaming well on the Pittsburgh Hays Eagle nest...'
I opened the New Thread this morning
Re: Report Cams Down and Forum Errors
SUNDAY, SEPTEMBER 27, 2020
Good Morning Judy ..
Re the SR N Cam
6:22a..It has a spinning circle at times
Thank You
Bev
Good Morning Judy ..
Re the SR N Cam
6:22a..It has a spinning circle at times
Thank You
Bev
Re: Report Cams Down and Forum Errors
Good Afternoon all! Looks like all the HWF embedded cams are down except for the Surrey S cam. I had just checked on Delta cams about 10 minutes ago and they were up but now are both down.
Edit: The Surrey S Cam has only been up for about 7 minutes so I take it that it was down as well at some point.
Edit: The Surrey S Cam has only been up for about 7 minutes so I take it that it was down as well at some point.
Re: Report Cams Down and Forum Errors
Surrey North and South are both up now (4:10 pm) - so maybe Ken is trying different combinations?SueB wrote: ↑Sun Sep 27, 2020 3:22 pmGood Afternoon all! Looks like all the HWF embedded cams are down except for the Surrey S cam. I had just checked on Delta cams about 10 minutes ago and they were up but now are both down.
Edit: The Surrey S Cam has only been up for about 7 minutes so I take it that it was down as well at some point.
I'll send him a quick note.
2023 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
Thanks Judy! I also just wanted to add that I was going to go on and check the zoomer cams but Sandy was already on there. Guessing they were up...so it is just the embedded cams that are down.JudyB wrote: ↑Sun Sep 27, 2020 4:10 pmSurrey North and South are both up now (4:10 pm) - so maybe Ken is trying different combinations?SueB wrote: ↑Sun Sep 27, 2020 3:22 pmGood Afternoon all! Looks like all the HWF embedded cams are down except for the Surrey S cam. I had just checked on Delta cams about 10 minutes ago and they were up but now are both down.
Edit: The Surrey S Cam has only been up for about 7 minutes so I take it that it was down as well at some point.
I'll send him a quick note.
Re: Report Cams Down and Forum Errors
10:19 I just tried Delta 2 and Harrison Mills and both were down!
Darlene, Langley, member since May 10 2006
Re: Report Cams Down and Forum Errors
Thanks, Darlene. The only embedded cam currently streaming is Surrey Reserve South; North was streaming for over 12 hours, but is now stuck at 10:16 am with a spinning circle, and the other embedded cams are all offline.
When I spoke to Ken this weekend, he was planning to go to White Rock today to see if there's something going on with the equipment there - I can log into all three cams, but he's having trouble with the North cam - and he can't get them to go successfully to YouTube.
The Delta cams had been doing quite well - not sure why they went down, but I have sent him a message and will try to call him for an update later today.
I'm continuing to try to plow through the tutorials for YouTube and the manuals for the cams and for the Wowza software to see if I can find where something needs updating, but so far I haven't had much luck with that. Keeping fingers crossed that we can somehow get this resolved soon.
2023 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints