Report Cams Down and Forum Errors
Re: Report Cams Down and Forum Errors
9:52pm.....Today at Delta2 we've noticed a loud humming on the cams. The zoomer cams seem to be the loudest..........when I listen to just the embedded cams the humming is still there, but it isn't loud.
"Volunteers do not necessarily have the time..............they have the heart"..........Elizabeth Andrew
(Member since 9/10/11)
(Member since 9/10/11)
Re: Report Cams Down and Forum Errors
Thanks, Jean - I've looked at the settings and can't see anything that's likely to help. I will do a bit of research and see if I can find anything that we might tweak, but at this point I'm afraid our best hope is that something will jiggle the wires and they'll clear up again. Zoomers can adjust the volume on the zoomer monitor screen for most cams - we generally keep it at 50%, but it's fine to change it to what works best for you; it won't affect the feed - that's buried in the config settings.
2023 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
SUNDAY, JULY 5 , 2020
Good Morning Judy~
Re SR
7:12a .. N Cam is sputtering
Thank You
Bev
Good Morning Judy~
Re SR
7:12a .. N Cam is sputtering
Thank You
Bev
Re: Report Cams Down and Forum Errors
Thanks, Bev - rebooting it now.
2023 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
Thanks Judy
Re: Report Cams Down and Forum Errors
TUESDAY, JULY 7
Good Aftenoon Judy
I just saw this
12:30pm
N Cam at H Mills is down, NPTZ cam is working Maybe a reboot with help when you have time
Thank You
Bev
Good Aftenoon Judy
I just saw this
12:30pm
N Cam at H Mills is down, NPTZ cam is working Maybe a reboot with help when you have time
Thank You
Bev
Re: Report Cams Down and Forum Errors
Thanks, Bev - and the reboot didn't help. I'll send a message to Ken.
2023 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
Re: Report Cams Down and Forum Errors
THURSDAY , JULY 16, 2020
Good Morning Judy ~
Re N Cam at SR
3:56a
N Cam is sputtering ....I think a reboot will solve that .
Thank You
Bev
Good Morning Judy ~
Re N Cam at SR
3:56a
N Cam is sputtering ....I think a reboot will solve that .
Thank You
Bev
Re: Report Cams Down and Forum Errors
FRIDAY, JULY 17, 2020
Good Afternoon Judy ~
The SPTZ Cam at H Mills is streaming ...... but not the S Embedded Cam ..
I am wondering if a reboot will help when you have time .
FYI
Both S Cams have been down since March 23.....
Thank You
Bev
Good Afternoon Judy ~
The SPTZ Cam at H Mills is streaming ...... but not the S Embedded Cam ..
I am wondering if a reboot will help when you have time .
FYI
Both S Cams have been down since March 23.....
Thank You
Bev
Re: Report Cams Down and Forum Errors
6:45 pm Delta 2 zoomer cams and embedded cams have gone down. 6:57 pm the west the zoomer cam is back but the east and west embedded cams and east zoomer still offline. Edit: 6:01 pm the west zoomer cam and west embedded cams are back online. East still offline.
“Eagles: When they walk, they stumble. They are not what one would call graceful. They were not designed to walk. They fly. And when they fly, oh, how they fly, so free, so graceful. They see from the sky what we never see.” – Unknown
Re: Report Cams Down and Forum Errors
7:39pm........Both E cams still off at Delta2. And now the W cams are gone as well. We have no cams at this time.
9:13pm..........All cams have come back now at Delta2.
9:13pm..........All cams have come back now at Delta2.
"Volunteers do not necessarily have the time..............they have the heart"..........Elizabeth Andrew
(Member since 9/10/11)
(Member since 9/10/11)
Re: Report Cams Down and Forum Errors
Thanks, Bev, and I apologize for the delay in getting back to you about this.
I didn't post, but a couple of weeks ago, I discovered the South cam was streaming (like you, I check it from time to time) - and I did a reboot. And when I tried to log back in afterwards, I could no longer reach the cam.
This time, I'm sending an email to Ken first to let him know that the cam itself is streaming and to ask him if there's anything he wants to check before one of us tries a reboot.
What happened last time was probably a coincidence - it seems as if we have a poor connection out there somewhere, and I'm hoping at the very least we can have a site visit to check all the wiring within reach. whether or not we get the cams cleaned this year. (I'd love to have them cleaned - and we may need someone in the tree if Ken can't find a problem on the ground - but I have no idea what our resources will be.)
Anyway - stay tuned.
2023 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
Thank You Judy and no need to apologize It was Yolande who discovered it streaming... I will wait and see what Ken has to say.........JudyB wrote: ↑Sat Jul 18, 2020 7:56 amThanks, Bev, and I apologize for the delay in getting back to you about this.
I didn't post, but a couple of weeks ago, I discovered the South cam was streaming (like you, I check it from time to time) - and I did a reboot. And when I tried to log back in afterwards, I could no longer reach the cam.
This time, I'm sending an email to Ken first to let him know that the cam itself is streaming and to ask him if there's anything he wants to check before one of us tries a reboot.
What happened last time was probably a coincidence - it seems as if we have a poor connection out there somewhere, and I'm hoping at the very least we can have a site visit to check all the wiring within reach. whether or not we get the cams cleaned this year. (I'd love to have them cleaned - and we may need someone in the tree if Ken can't find a problem on the ground - but I have no idea what our resources will be.)
Anyway - stay tuned.
Re: Report Cams Down and Forum Errors
1:46 Delta2 cams are both down. I can get in to the ptz cams either.
Darlene, Langley, member since May 10 2006