Report Cams Down and Forum Errors

Report cams up/down or if you need technical assistance.
User avatar
Jean
Topic Assistant
Posts: 38441
Joined: Feb 19, 2018
Location: Langley, BC

Re: Report Cams Down and Forum Errors

Post by Jean » Fri Jul 03, 2020 9:53 pm

9:52pm.....Today at Delta2 we've noticed a loud humming on the cams. The zoomer cams seem to be the loudest..........when I listen to just the embedded cams the humming is still there, but it isn't loud.
"Volunteers do not necessarily have the time..............they have the heart"..........Elizabeth Andrew

(Member since 9/10/11)

User avatar
JudyB
Admin
Posts: 17990
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Sat Jul 04, 2020 11:31 am

Jean wrote:
Fri Jul 03, 2020 9:53 pm
9:52pm.....Today at Delta2 we've noticed a loud humming on the cams. The zoomer cams seem to be the loudest..........when I listen to just the embedded cams the humming is still there, but it isn't loud.
Thanks, Jean - I've looked at the settings and can't see anything that's likely to help. I will do a bit of research and see if I can find anything that we might tweak, but at this point I'm afraid our best hope is that something will jiggle the wires and they'll clear up again. Zoomers can adjust the volume on the zoomer monitor screen for most cams - we generally keep it at 50%, but it's fine to change it to what works best for you; it won't affect the feed - that's buried in the config settings.
20200704_005.jpg
20200704_005.jpg (16.09 KiB) Viewed 1918 times

User avatar
IrishEyes
Forum Assistant
Posts: 120399
Joined: Feb 09, 2018
Location: Nova Scotia, Canada

Re: Report Cams Down and Forum Errors

Post by IrishEyes » Sun Jul 05, 2020 7:24 am

SUNDAY, JULY 5 , 2020

Good Morning Judy~

Re SR

7:12a .. N Cam is sputtering

Thank You
Bev
Image

HELPFUL HINTS.......Bev...member since 08/04/09

User avatar
JudyB
Admin
Posts: 17990
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Sun Jul 05, 2020 8:02 am

IrishEyes wrote:
Sun Jul 05, 2020 7:24 am
SUNDAY, JULY 5 , 2020

Good Morning Judy~

Re SR

7:12a .. N Cam is sputtering

Thank You
Bev
Thanks, Bev - rebooting it now.

User avatar
IrishEyes
Forum Assistant
Posts: 120399
Joined: Feb 09, 2018
Location: Nova Scotia, Canada

Re: Report Cams Down and Forum Errors

Post by IrishEyes » Sun Jul 05, 2020 8:14 am

JudyB wrote:
Sun Jul 05, 2020 8:02 am
IrishEyes wrote:
Sun Jul 05, 2020 7:24 am
SUNDAY, JULY 5 , 2020

Good Morning Judy~

Re SR

7:12a .. N Cam is sputtering

Thank You
Bev
Thanks, Bev - rebooting it now.
Thanks Judy :huggie:
Image

HELPFUL HINTS.......Bev...member since 08/04/09

User avatar
IrishEyes
Forum Assistant
Posts: 120399
Joined: Feb 09, 2018
Location: Nova Scotia, Canada

Re: Report Cams Down and Forum Errors

Post by IrishEyes » Tue Jul 07, 2020 12:50 pm

TUESDAY, JULY 7

Good Aftenoon Judy

I just saw this

12:30pm
N Cam at H Mills is down,
screenshot_41.jpg
NPTZ cam is working
screenshot_39.jpg
Maybe a reboot with help when you have time

Thank You
Bev
Image

HELPFUL HINTS.......Bev...member since 08/04/09

User avatar
JudyB
Admin
Posts: 17990
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Tue Jul 07, 2020 1:18 pm

IrishEyes wrote:
Tue Jul 07, 2020 12:50 pm
TUESDAY, JULY 7

Good Aftenoon Judy

I just saw this

12:30pm
N Cam at H Mills is down,
screenshot_41.jpg
NPTZ cam is working
screenshot_39.jpg

Maybe a reboot with help when you have time

Thank You
Bev
Thanks, Bev - and the reboot didn't help. I'll send a message to Ken.

User avatar
IrishEyes
Forum Assistant
Posts: 120399
Joined: Feb 09, 2018
Location: Nova Scotia, Canada

Re: Report Cams Down and Forum Errors

Post by IrishEyes » Tue Jul 07, 2020 1:28 pm

JudyB wrote:
Tue Jul 07, 2020 1:18 pm
IrishEyes wrote:
Tue Jul 07, 2020 12:50 pm
TUESDAY, JULY 7

Good Aftenoon Judy

I just saw this

12:30pm
N Cam at H Mills is down,
screenshot_41.jpg
NPTZ cam is working
screenshot_39.jpg

Maybe a reboot with help when you have time

Thank You
Bev
Thanks, Bev - and the reboot didn't help. I'll send a message to Ken.
Thanks for trying Judy !
Image

HELPFUL HINTS.......Bev...member since 08/04/09

User avatar
IrishEyes
Forum Assistant
Posts: 120399
Joined: Feb 09, 2018
Location: Nova Scotia, Canada

Re: Report Cams Down and Forum Errors

Post by IrishEyes » Thu Jul 16, 2020 4:08 am

THURSDAY , JULY 16, 2020

Good Morning Judy ~

Re N Cam at SR

3:56a
N Cam is sputtering ....I think a reboot will solve that .

Thank You
Bev
Image

HELPFUL HINTS.......Bev...member since 08/04/09

User avatar
IrishEyes
Forum Assistant
Posts: 120399
Joined: Feb 09, 2018
Location: Nova Scotia, Canada

Re: Report Cams Down and Forum Errors

Post by IrishEyes » Fri Jul 17, 2020 2:06 pm

FRIDAY, JULY 17, 2020

Good Afternoon Judy ~

The SPTZ Cam at H Mills is streaming ...... but not the S Embedded Cam ..
I am wondering if a reboot will help when you have time .

FYI
Both S Cams have been down since March 23.....


Thank You
Bev
Image

HELPFUL HINTS.......Bev...member since 08/04/09

User avatar
Sandy_W
Topic Assistant
Posts: 56625
Joined: Feb 22, 2018
Location: Arkansas

Re: Report Cams Down and Forum Errors

Post by Sandy_W » Fri Jul 17, 2020 6:55 pm

6:45 pm Delta 2 zoomer cams and embedded cams have gone down. 6:57 pm the west the zoomer cam is back but the east and west embedded cams and east zoomer still offline. Edit: 6:01 pm the west zoomer cam and west embedded cams are back online. East still offline.
“Eagles: When they walk, they stumble. They are not what one would call graceful. They were not designed to walk. They fly. And when they fly, oh, how they fly, so free, so graceful. They see from the sky what we never see.” – Unknown

User avatar
Jean
Topic Assistant
Posts: 38441
Joined: Feb 19, 2018
Location: Langley, BC

Re: Report Cams Down and Forum Errors

Post by Jean » Fri Jul 17, 2020 7:40 pm

7:39pm........Both E cams still off at Delta2. And now the W cams are gone as well. We have no cams at this time.

9:13pm..........All cams have come back now at Delta2.
"Volunteers do not necessarily have the time..............they have the heart"..........Elizabeth Andrew

(Member since 9/10/11)

User avatar
JudyB
Admin
Posts: 17990
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Sat Jul 18, 2020 7:56 am

IrishEyes wrote:
Fri Jul 17, 2020 2:06 pm
FRIDAY, JULY 17, 2020

Good Afternoon Judy ~

The SPTZ Cam at H Mills is streaming ...... but not the S Embedded Cam ..
I am wondering if a reboot will help when you have time .

FYI
Both S Cams have been down since March 23.....


Thank You
Bev
Thanks, Bev, and I apologize for the delay in getting back to you about this.

I didn't post, but a couple of weeks ago, I discovered the South cam was streaming (like you, I check it from time to time) - and I did a reboot. And when I tried to log back in afterwards, I could no longer reach the cam.

This time, I'm sending an email to Ken first to let him know that the cam itself is streaming and to ask him if there's anything he wants to check before one of us tries a reboot.

What happened last time was probably a coincidence - it seems as if we have a poor connection out there somewhere, and I'm hoping at the very least we can have a site visit to check all the wiring within reach. whether or not we get the cams cleaned this year. (I'd love to have them cleaned - and we may need someone in the tree if Ken can't find a problem on the ground - but I have no idea what our resources will be.)

Anyway - stay tuned.

User avatar
IrishEyes
Forum Assistant
Posts: 120399
Joined: Feb 09, 2018
Location: Nova Scotia, Canada

Re: Report Cams Down and Forum Errors

Post by IrishEyes » Sat Jul 18, 2020 8:07 am

JudyB wrote:
Sat Jul 18, 2020 7:56 am
IrishEyes wrote:
Fri Jul 17, 2020 2:06 pm
FRIDAY, JULY 17, 2020

Good Afternoon Judy ~

The SPTZ Cam at H Mills is streaming ...... but not the S Embedded Cam ..
I am wondering if a reboot will help when you have time .

FYI
Both S Cams have been down since March 23.....


Thank You
Bev
Thanks, Bev, and I apologize for the delay in getting back to you about this.

I didn't post, but a couple of weeks ago, I discovered the South cam was streaming (like you, I check it from time to time) - and I did a reboot. And when I tried to log back in afterwards, I could no longer reach the cam.

This time, I'm sending an email to Ken first to let him know that the cam itself is streaming and to ask him if there's anything he wants to check before one of us tries a reboot.

What happened last time was probably a coincidence - it seems as if we have a poor connection out there somewhere, and I'm hoping at the very least we can have a site visit to check all the wiring within reach. whether or not we get the cams cleaned this year. (I'd love to have them cleaned - and we may need someone in the tree if Ken can't find a problem on the ground - but I have no idea what our resources will be.)

Anyway - stay tuned.
Thank You Judy and no need to apologize :hug: It was Yolande who discovered it streaming... I will wait and see what Ken has to say.........
Image

HELPFUL HINTS.......Bev...member since 08/04/09

User avatar
Darlene
Admin
Posts: 1728
Joined: Jan 15, 2018
Location: Langley

Re: Report Cams Down and Forum Errors

Post by Darlene » Sat Jul 18, 2020 1:47 pm

1:46 Delta2 cams are both down. I can get in to the ptz cams either.
Darlene, Langley, member since May 10 2006

Post Reply

Return to “Technical Help”