Report Cams Down and Forum Errors

[IrishEyes]

12:19 Nest Time

Re H Mills update ..


Hi Judy all..The N Embedded and Direct Access Zoomer Cams are streaming and there is a break in the sound at times...

Both S Cams are still down since Jan. 16 ..

Thank you Ken and Judy for all you are doing ... On a positive note .. One cam is better than none ..

[JudyB]

9.04a For the last few days the White Rock cams freeze , and they go live once I refresh , maybe they can be checked why this is happening, WA/ CU cams

I don't really know what to check, amy - a number of the cams have been having issues that seem to be more related to the rainy, windy weather than anything in the cam settings - and with luck this will clear up once we have a couple of calm sunny days. If it doesn't, please post again, and we'll see what we can do.

[IrishEyes]

SUNDAY, JANUARY 26, 2020

Good Afternoon Judy and all !


S Cam is streaming on H Mills
3:41p,

[JudyB]

Wonderful news - thanks, Bev!

Keeping fingers crossed that Delta East will be back online soon as well!

[IrishEyes]

You are welcome Judy! for Delta 2 East Cam

[Philjo56France]

Hi Judy, Bev, ...

Sorry but no South cam at Harrison Mills at 23h06 North cam time


04h44 Stream is back to normal now

It missed only about 4h of streaming between North cam (12h) and South cam (8h)

[IrishEyes]

MONDAY , JANUARY 27, 2020

Good Morning Judy !

Re Surrey Reserve Cams..

5:42a
N Cam is sputtering

Thank you

Bev

[IrishEyes]

Re H Mills S Cam

Hi Judy!

6:30a
South Cam has spinning circle ...Maybe a reboot will help .

Thank You

Bev

ETA..
6:39a
S Cam comes back and goes again!

[IrishEyes]

TUESDAY, JANUARY 28, 2020

\Good Morning Judy !

5:54am nest time. Re Surrey Reserve

North Cam has spinning circle

Thank you

Bev

[JudyB]

I did send a message to Ken about all the cam issues we've been having.

1:27 pm
Both Surrey cams just went down - I'm thinking Ken may be rebooting the Wowza software and some of the other equipment that sends the signals from the various cams to YouTube, where they are converted into a format that we can embed in our live cam pages.

1:30 pm
Surrey cams are back, and Harrison Mills cams are streaming (dvr is going back 4 hours).

1:32 pm
Went back to Surrey, and South was down - refreshed the page a couple of times and it's back.

Delta 2 East is still down (and most likely has an issue with the equipment on site - hopefully something Ken will be able to access when he can arrange a site visit); Delta 2 West was down briefly, but is back now (1:34 pm) with the dvr going back about 7 minutes.

All three White Rock cams are up (with dvr going back about 8 minutes) - and they have an eagle on the nest!

Added -
Surrey cams now have dvr going back about 10 minutes (as of 1:38) - so I think Ken did a series of different resets on the various cams - keeping fingers crossed that the streaming improves! I'm noticing that the time stamp on the two Surrey cams is within a couple of seconds - North had been running almost a minute behind.

And I just rechecked HM and the dvr was 12 minutes.

Note: All my observations here are from the embedded cams on our live cams pages - I did not try to log into any of the cams.

[Philjo56France]

Hi Judy
00h56 Spining South cam at Harrison Mills

and for more than 4 minutes now
Ncam DVR is 9h
Scam no acces now

04h38 all is nominal

DVR Ncam is 10h07
DVR Scam is 10h38

[Sandy_W]

3:17 pm well I am getting ads on the all of the Hancock live cam pages. See images. I can't close the ad to see the cams. When I scroll down, can see the cams are there but can't get them to appear. Is it only me? Have I been hacked or are others seeing these too?

[Jean]

I was able to click off the ads I'm seeing on the Delta2 embedded cam page. But this is not normal. I can see the embedded cam windows now but had to scroll down slowly to get them to appear.

[JudyB]

I'm seeing an ad at the top of the live cam pages which is a new thing:

There have always been ads, but they've generally been further down the page. And I can scroll past the ad and view the two cams the same as usual - but this may have been changing over the course of the evening - we had a friend over for dinner, so I've been away from the computer for a while.

Thanks for the emails about this, and I'll make sure they get to David Hathaway and to Myles, who have the most ability to control that. I know David Hathaway is a bit busy with personal stuff at present, but hopefully we'll get this sorted out soon - sending people to our live cams page when they can't find the cams on them is pretty much counter-productive, especially as I'm hoping to do a bit of fundraising once we're close to eggs (unless someone else would like to do fundraising this year - it's really important, and I'm getting burned out - contact me if interested!).

[SueB]

Good Afternoon All! I think this may have been reported previously but just wanted to report on what I am experiencing on the Delta 2 Embedded Cam screen. When trying to roll back and grab s'caps so that I can post them, I get to the point I need the s'cap from, which could be a few minutes or more back, and for some reason after a second or more, the embedded cam screen jumps back to LIVE so I am unable to grab s'caps from there. It was even worse just now as I was on the cams and with the wind blowing at Delta I have to pause the rollback so I can get a clear s'cap.....I pause the screen, but a split second later it jumps to LIVE, current time. At this point it is very difficult to grab s'caps from the embedded screen so I've decided to get them from the zoomer screen, which I put on full screen. The only problem with this is that I will miss activity that is happening when I'm not staring at the zoomer cam screen....like while I'm posting.