Report Cams Down and Forum Errors
Re: Report Cams Down and Forum Errors
7:15 pm reporting the Delta 2 embedded cams are offline. I checked earlier...maybe four hours ago and they were offline then as well.
“Eagles: When they walk, they stumble. They are not what one would call graceful. They were not designed to walk. They fly. And when they fly, oh, how they fly, so free, so graceful. They see from the sky what we never see.” – Unknown
Re: Report Cams Down and Forum Errors
Thanks, Sandy -
It looks as if they are back online now - perhaps Ken did a morning check of the cams and rebooted them. Just looked back, and dvr only goes back 47 minutes, so I'm guessing someone did a reboot then.
2023 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
MONDAY , JANUARY 13 , 2020
Good Morning Judy
6:32a Nest Time
The Embedded and Direct Access Zoomer cams are all down .. the last live stream was 12 hours .. it was very windy on H Mills ..
Heather Posted the Power Outages Map on the H Mills nest thread
viewtopic.php?p=272621#p272621
Thank You
Bev
Good Morning Judy
6:32a Nest Time
The Embedded and Direct Access Zoomer cams are all down .. the last live stream was 12 hours .. it was very windy on H Mills ..
Heather Posted the Power Outages Map on the H Mills nest thread
viewtopic.php?p=272621#p272621
Thank You
Bev
Re: Report Cams Down and Forum Errors
Thanks for posting here, Bev! Looking at the outage maps Heather posted, it does look like the power is out there.
2023 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
TUESDAY, JANUARY 14, 202O
Good Morning Judy !
Re the H Mills Cams
Heather reported S Cam is live since 8:17pm last night ..
N Cam is down
Re this morning
5:58a
N Cam is down and S Cam it struggling to cut in
North Zoomer Cam is still down .... I can't connect to it '
South Zoomer Cam is streaming ..no picture . the IR is not working
Maybe a reboot of the S Cam will help.
Thank You
Bev
Good Morning Judy !
Re the H Mills Cams
Heather reported S Cam is live since 8:17pm last night ..
N Cam is down
Re this morning
5:58a
N Cam is down and S Cam it struggling to cut in
North Zoomer Cam is still down .... I can't connect to it '
South Zoomer Cam is streaming ..no picture . the IR is not working
Maybe a reboot of the S Cam will help.
Thank You
Bev
Re: Report Cams Down and Forum Errors
I'm rebooting South. Heading out for an appointment soon - will be able to check my phone in a couple of hours, though I won't be able to do anything with the cams until mid-afternoon cam time. I also can not connect with North.IrishEyes wrote: ↑Tue Jan 14, 2020 6:29 amTUESDAY, JANUARY 14, 202O
Good Morning Judy !
Re the H Mills Cams
Heather reported S Cam is live since 8:17pm last night ..
N Cam is down
Re this morning
5:58a
N Cam is down and S Cam it struggling to cut in
North Zoomer Cam is still down .... I can't connect to it '
South Zoomer Cam is streaming ..no picture . the IR is not working
Maybe a reboot of the S Cam will help.
Thank You
Bev
I wonder if the IR is on the North cam?
2023 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
JudyB wrote: ↑Tue Jan 14, 2020 7:23 amI'm rebooting South. Heading out for an appointment soon - will be able to check my phone in a couple of hours, though I won't be able to do anything with the cams until mid-afternoon cam time. I also can not connect with North.IrishEyes wrote: ↑Tue Jan 14, 2020 6:29 amTUESDAY, JANUARY 14, 202O
Good Morning Judy !
Re the H Mills Cams
Heather reported S Cam is live since 8:17pm last night ..
N Cam is down
Re this morning
5:58a
N Cam is down and S Cam it struggling to cut in
North Zoomer Cam is still down .... I can't connect to it '
South Zoomer Cam is streaming ..no picture . the IR is not working
Maybe a reboot of the S Cam will help.
Thank You
Bev
I wonder if the IR is on the North cam?
Thanks Judy and take care
Re: Report Cams Down and Forum Errors
I’ll send a message to Ken, but if your reboot didn’t help, it may be the cold temperatures affecting the ability of the cam to move.
2023 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
Good Morning Judy ..
Re H Mills South Cam
4:22am
Very windy and IR is not working on the S Cam .. I think the controls need to be adjusted.
Thank You
Bev
PS I also find the forum slow and slow to load scaps !
Re H Mills South Cam
4:22am
Very windy and IR is not working on the S Cam .. I think the controls need to be adjusted.
Thank You
Bev
PS I also find the forum slow and slow to load scaps !
Re: Report Cams Down and Forum Errors
Good morning, Bev -
I've taken a look at the controls and don't see anything that I dare change now while the cam is working. I'll try to take a look later this evening or tomorrow morning while it's dark in BC.
I did mention the issue to Ken, and he may take a look later. I will mention that he's snowed in at present, so not able to do a site visit on any of the cams for at least a couple of days.
2023 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
Thank You Judy, I understand .. I think all of us at H Mills are happy we have one cam streaming on H Mills and re Ken.. we don't expect Ken to make a site visit until it is safe to do so ..JudyB wrote: ↑Wed Jan 15, 2020 8:29 amGood morning, Bev -
I've taken a look at the controls and don't see anything that I dare change now while the cam is working. I'll try to take a look later this evening or tomorrow morning while it's dark in BC.
I did mention the issue to Ken, and he may take a look later. I will mention that he's snowed in at present, so not able to do a site visit on any of the cams for at least a couple of days.
Re: Report Cams Down and Forum Errors
3:22 pm from Delta 2, I have been having issues trying to use the DVR rollback and the cam will freeze with the spinning circles. Try to refreshed numerous times attempting to get s'caps, as I am doing now on the east cam. Finally went to the west DVR to get s'caps. Sometimes I just give up in trying to use the rollback DVR feature and try to describe what I saw while zooming or watching. Any suggestions would be helpful. Thanks.
“Eagles: When they walk, they stumble. They are not what one would call graceful. They were not designed to walk. They fly. And when they fly, oh, how they fly, so free, so graceful. They see from the sky what we never see.” – Unknown
Re: Report Cams Down and Forum Errors
Hi Judy ~
4:44pm
Re H Mills
Very windy with heavy snow at H Mills
Both Embedded cams are down
4:48pm
N Cam is back
S Cam still down and I can't connect to the SPTZ Direct Access Zoomer Cam
Thank You
Bev
PS .. I think this is a wait and see situation. JMO
4:44pm
Re H Mills
Very windy with heavy snow at H Mills
Both Embedded cams are down
4:48pm
N Cam is back
S Cam still down and I can't connect to the SPTZ Direct Access Zoomer Cam
Thank You
Bev
PS .. I think this is a wait and see situation. JMO
Re: Report Cams Down and Forum Errors
MONDAY, JANUARY 20, 2020
GoodAfternoon Judy
Re HMills
12:44pm.Nest Time
The N Cam is sputtering ... maybe a reboot will help when you have time .
Thank You
Bev
PS For the record.. The S Cam is still down... we are waiting to see if it comes .
GoodAfternoon Judy
Re HMills
12:44pm.Nest Time
The N Cam is sputtering ... maybe a reboot will help when you have time .
Thank You
Bev
PS For the record.. The S Cam is still down... we are waiting to see if it comes .
Re: Report Cams Down and Forum Errors
Thanks, Bev - I'm afraid I was a bit under the weather yesterday so didn't get here to check for messages - does North still need a reboot?
2023 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints