Thanks, Amy! I can't connect either so sent a message to Ken.
Report Cams Down and Forum Errors
Re: Report Cams Down and Forum Errors
2023 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
I just heard from Ken and he also can’t connect. Nothing we can do tonight but he’ll get out to check when he can.
2023 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
I'm guessing Ken is at the site and may be replacing some of the equipment on the ground; I don't think the cam would have come back online otherwise.
2023 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
HmmSandy_W wrote: ↑Tue Oct 01, 2019 4:51 pm4:47 pm problem with zoomer cams at Delta 2. First, had a slow response logging into both the east and west cams, about four minutes. Then the controls were slow to respond and would sometimes freeze using the west cam. Then the screen would go black on both zoomer cams. It felt like losing connection to the zoomer cams with the non-response of the controls on the west cam. I wasn't using the east cam much but did try and had the same slow response. The embedded cams were not losing connection.
I just tried logging into East - and it took a bit longer than sometimes, but no where near as long as it took for you. I also immediately closed out, so as not to interfere with your zooming. I hate recommending this, but it might help to reboot your computer. Or it could be something that was going on with the internet at the site, and improved before I tried logging in. Maybe try closing one of the cams then logging back in and see if it's better?
I'm sorry that I don't have better suggestions, and if it continues to do this, I'll try some more things in the morning.
2023 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
Thanks for checking, Judy. I wasn't having any issue with Internet connections from other just plain surfing. Sue, left this message:JudyB wrote: ↑Tue Oct 01, 2019 5:34 pmHmmSandy_W wrote: ↑Tue Oct 01, 2019 4:51 pm4:47 pm problem with zoomer cams at Delta 2. First, had a slow response logging into both the east and west cams, about four minutes. Then the controls were slow to respond and would sometimes freeze using the west cam. Then the screen would go black on both zoomer cams. It felt like losing connection to the zoomer cams with the non-response of the controls on the west cam. I wasn't using the east cam much but did try and had the same slow response. The embedded cams were not losing connection.
I just tried logging into East - and it took a bit longer than sometimes, but no where near as long as it took for you. I also immediately closed out, so as not to interfere with your zooming. I hate recommending this, but it might help to reboot your computer. Or it could be something that was going on with the internet at the site, and improved before I tried logging in. Maybe try closing one of the cams then logging back in and see if it's better?
I'm sorry that I don't have better suggestions, and if it continues to do this, I'll try some more things in the morning.
Hi Sandy! I was out for a little while but had the embedded cams up and running while I was gone. When I got home the W Cam had gone way back to the beginning of the rollback (was showing last night's tape)....that never happened before. So there must have been something going on when you were on the cams. It may not have just been you.
After I logged off and left the embedded cams open for a little bit of time, I too noticed the west cam reverted back to the early morning hours. It was odd too when I opened the zoomer cam site to log off, the site took a couple of minutes to load. Maybe just a weird anomaly at the time for me from the HWF site. Who knows....
“Eagles: When they walk, they stumble. They are not what one would call graceful. They were not designed to walk. They fly. And when they fly, oh, how they fly, so free, so graceful. They see from the sky what we never see.” – Unknown
Re: Report Cams Down and Forum Errors
At some point yesterday, I noticed the Surrey embedded cams were not live; I had been working with windows that partly covered my cam windows some of the time, so figured I'd accidentally clicked something.Sandy_W wrote: ↑Wed Oct 02, 2019 3:15 am
Thanks for checking, Judy. I wasn't having any issue with Internet connections from other just plain surfing. Sue, left this message:
Hi Sandy! I was out for a little while but had the embedded cams up and running while I was gone. When I got home the W Cam had gone way back to the beginning of the rollback (was showing last night's tape)....that never happened before. So there must have been something going on when you were on the cams. It may not have just been you.
After I logged off and left the embedded cams open for a little bit of time, I too noticed the west cam reverted back to the early morning hours. It was odd too when I opened the zoomer cam site to log off, the site took a couple of minutes to load. Maybe just a weird anomaly at the time for me from the HWF site. Who knows....
But just a little while ago I left the cams up while I went to get lunch in the other room - and when I came back, they were both again in the middle of the recording, rather than live. Very strange.
2023 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
Thanks, Amy! I've sent a message to Ken to see if he can help.
2023 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
Morning!
The cam controls on the HM NPTZ are very sticky...the cam lurches from place to place. I found the same problem yesterday, but not quite so bad as this morning.
I tried the SPTZ, and no problem with the controls on that cam...
Thanks!
The cam controls on the HM NPTZ are very sticky...the cam lurches from place to place. I found the same problem yesterday, but not quite so bad as this morning.
I tried the SPTZ, and no problem with the controls on that cam...
Thanks!
Re: Report Cams Down and Forum Errors
Is this still a problem? Sorry for the delay in getting back here.
2023 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
It seems very windy at Surrey Reserve - which could be causing a problem at White Rock as well. I can try rebooting things (or you can) but I'm not sure it will help in this weather.
2023 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
Re: Report Cams Down and Forum Errors
WEDNESDAY , Oct. 23 , 2019
Good Afternoon
Re H Mills ...
The DVR on both embedded cams only goes back for 2 hours ~ Is anyone else having this problem ?
Thanks ,
Bev .
Good Afternoon
Re H Mills ...
The DVR on both embedded cams only goes back for 2 hours ~ Is anyone else having this problem ?
Thanks ,
Bev .
Re: Report Cams Down and Forum Errors
I can get 12 hrs on the DVR now .. but Yolande can't ... she refreshed the cams and that didn't help
Re: Report Cams Down and Forum Errors
No clue what's going on, Bev, but I'm also able to get 12 hours on both HM cams.
I do know there have been times with my iPad when I've had to try 3-4 times to get a live feed from the current day/time on an SR cam - and it's possible that happens with other cams. Like Yolande, I have good computer skills - but I can be in a hurry, and not notice that I'm seeing a video instead of the live feed. Forcing a full refresh/reload usually helps, and hopefully whatever is going on, it will be sorted out soon.
Off topic - while I was scrolling to quick-check the dvr, I saw Dad and Lady perched together, like in the pictures you posted from this morning - so lovely to see them!
2023 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
Thanks Judy ... Dad and Lady are so beautifulJudyB wrote: ↑Wed Oct 23, 2019 6:35 pmNo clue what's going on, Bev, but I'm also able to get 12 hours on both HM cams.
I do know there have been times with my iPad when I've had to try 3-4 times to get a live feed from the current day/time on an SR cam - and it's possible that happens with other cams. Like Yolande, I have good computer skills - but I can be in a hurry, and not notice that I'm seeing a video instead of the live feed. Forcing a full refresh/reload usually helps, and hopefully whatever is going on, it will be sorted out soon.
Off topic - while I was scrolling to quick-check the dvr, I saw Dad and Lady perched together, like in the pictures you posted from this morning - so lovely to see them!
For your Yolande
Good Night and Hugs