Report Cams Down and Forum Errors
Re: Report Cams Down and Forum Errors
7.06a The WR , WA camera is sticking, can it be rebooted?
Re: Report Cams Down and Forum Errors
I'm rebooting it now.
2019 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
SUNDAY , AUGUST 18, 2019
5:07p pm nest time
Re Harrison Mills N Embedded Cam
Hi Judy .. I know it is late where you live
N Embedded Cam is sputtering..crackling sound since earlier today .. the time on it is correct... it is windy at H Mills and maybe that is what is affecting the Mic on the N Cam or loose connection
... wondering if a reboot will help ... what do you think? and no rush .. thought I should let you know ..
Thanks
Bev.
5:07p pm nest time
Re Harrison Mills N Embedded Cam
Hi Judy .. I know it is late where you live
N Embedded Cam is sputtering..crackling sound since earlier today .. the time on it is correct... it is windy at H Mills and maybe that is what is affecting the Mic on the N Cam or loose connection


Thanks
Bev.
Re: Report Cams Down and Forum Errors
Monday , August 19 , 2019
Good Morning Judy ..
Re Harrison Mills
N embedded cam is down I checked the N Direct Access Zoomer Cam and that is streaming ..
Thanks
Bev
Good Morning Judy ..
Re Harrison Mills
N embedded cam is down I checked the N Direct Access Zoomer Cam and that is streaming ..
Thanks
Bev
Re: Report Cams Down and Forum Errors
Done, and the cam is streaming. Sorry for the delay.
2019 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
Thanks Judy and all is good ,
Re: Report Cams Down and Forum Errors
10:00am...........Judy, just letting you know that the embedded cams at Delta2 were off for about 4 hours last night............from just after midnight to just after 4am. When I've been on the cams a few times I'm still noticing lots of spinning circles happening.
All cams seem to fine at the moment.
All cams seem to fine at the moment.
"Volunteers do not necessarily have the time..............they have the heart"..........Elizabeth Andrew
(Member since 9/10/11)
(Member since 9/10/11)
Re: Report Cams Down and Forum Errors
Friday, Aug. 30, 2019: The Chehalis River Fish Hatchery cam seems to have frozen as of 10:45 a.m. today. Streaming resumed at about 1:14 p.m., but then froze up again.
Re: Report Cams Down and Forum Errors
Thanks, Sue. I think they folks at the hatchery are planning to do some work on the cam on Wednesday, moving it a little nearer the channel and pointing it down a bit more. I noticed it was stalled when I checked it - but I had several cams open so thought it might be me.
And I just went to check - and all our embedded cams are down and have been for 24 minutes. I'll contact Ken.
2019 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
Embedded cams should all be back - Ken was doing a quick hardware upgrade.
2019 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
The Surrey Reserve embedded cams went down around 1:15 pm, and I can't reach the cams using the zoomer link. I checked the BC Hydro site, and it looks as if there's an outage. I did send an email to Ken to let him know.
2019 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
Good Afternoon
4:58p
N embeeded Cam is down
N Direct Access Cam is streaming
Thanks
Bev
4:58p
N embeeded Cam is down
N Direct Access Cam is streaming
Thanks
Bev
Re: Report Cams Down and Forum Errors
Thanks, Bev - I'll take a look.
The Surrey South embedded cam just came back; the Surrey North embedded is still down - haven't checked the direct link yet.
Added -
It took a while for me to log into Harrison North, but I finally got the control stream and did a reboot, and still cannot connect. I'll send a message to Ken as soon as I finish checking out Surrey North.
2019 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
Thanks Judy .. I sent an e-mail to you and Ken rw H Mills~JudyB wrote: ↑Wed Sep 04, 2019 3:03 pmThanks, Bev - I'll take a look.
The Surrey South embedded cam just came back; the Surrey North embedded is still down - haven't checked the direct link yet.
Added -
It took a while for me to log into Harrison North, but I finally got the control stream and did a reboot, and still cannot connect. I'll send a message to Ken as soon as I finish checking out Surrey North.
Re: Report Cams Down and Forum Errors
3:13p
S Embeeded cam is sputtering
S Embeeded cam is sputtering
Re: Report Cams Down and Forum Errors
I just logged into Harrison South, and the clock was freezing briefly every few seconds, suggesting to me that there's an issue with the internet, not with the cam, so I didn't try a reboot. I'll send an email to Ken, though I'm not sure if there's anything he can do - if we're not getting a stable signal from the cam when we're logged in, the WOWZA server can't get one either. Hopefully things will clear up before too long.
2019 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
Thanks so much JudyJudyB wrote: ↑Wed Sep 04, 2019 3:38 pmI just logged into Harrison South, and the clock was freezing briefly every few seconds, suggesting to me that there's an issue with the internet, not with the cam, so I didn't try a reboot. I'll send an email to Ken, though I'm not sure if there's anything he can do - if we're not getting a stable signal from the cam when we're logged in, the WOWZA server can't get one either. Hopefully things will clear up before too long.

Re: Report Cams Down and Forum Errors
5:55p Nest Time
Both embedded cams are streaming at H Mills
Thank you Ken and Judy!
Both embedded cams are streaming at H Mills

Thank you Ken and Judy!

Re: Report Cams Down and Forum Errors
1.26p White Rock zoom cam is out , Wide Angle
Re: Report Cams Down and Forum Errors
Thanks, Amy! I can't connect either so sent a message to Ken.
2019 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
I just heard from Ken and he also can’t connect. Nothing we can do tonight but he’ll get out to check when he can.
2019 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
2,26p WA at White rock just went offline , it was streaming ok , zoom too
Re: Report Cams Down and Forum Errors
I'm guessing Ken is at the site and may be replacing some of the equipment on the ground; I don't think the cam would have come back online otherwise.
2019 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
7.13a I have rebooted NORTH cam at WR three times now , it is not streaming live , can it be checked please? anything on the WA yet ?
Re: Report Cams Down and Forum Errors
I’m not near a computer - sent a message to Ken to see if he can check North. Will try to get an update on WA when I get home.
2019 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
Ken says it’s looking ok now.
2019 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
TUESDAY, SEPTEMBER 24, 2019
Good Afternoon Judy
2:02pm
The Chehalis Underwater Cam is down
Thank You
Bev
Good Afternoon Judy
2:02pm
The Chehalis Underwater Cam is down
Thank You
Bev
Re: Report Cams Down and Forum Errors
The White Rock WA cam is streaming, though it will be erratic until Ken gets back to his house to reboot the Wowza server; the zoomer link should be OK.
Unfortunately when Myles and the climber arrived to work on the South/Bluff cam this afternoon, they found an eagle in the nest - and since we don't know if it's a resident (or possible resident) we all (including them, David and me) agreed it wasn't worth the risk of going up the tree.
And I will be pushing to have work at White Rock have priority next year since the maintenance team couldn't do most of what they'd hoped to do this year.
2019 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
4:47 pm problem with zoomer cams at Delta 2. First, had a slow response logging into both the east and west cams, about four minutes. Then the controls were slow to respond and would sometimes freeze using the west cam. Then the screen would go black on both zoomer cams. It felt like losing connection to the zoomer cams with the non-response of the controls on the west cam. I wasn't using the east cam much but did try and had the same slow response. The embedded cams were not losing connection.
“Eagles: When they walk, they stumble. They are not what one would call graceful. They were not designed to walk. They fly. And when they fly, oh, how they fly, so free, so graceful. They see from the sky what we never see.” – Unknown