Report Cams Down and Forum Errors
Re: Report Cams Down and Forum Errors
2:24 pm
Thanks, Lynne and DDuckies! I took a look at the cam using the zoomer link and all looks fine there, and checked the YouTube page and it's not getting the signal, so I sent a message to Ken asking him if he could check the Wowza.
3:08 pm update
Just heard back from Ken, and the North cam is streaming.
2023 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
8:08 am The SR North cam has a spinning circle. Since you already rebooted Judy, I won't try it now.
Re: Report Cams Down and Forum Errors
SUNDAY , AUGUST 18, 2019
5:07p pm nest time
Re Harrison Mills N Embedded Cam
Hi Judy .. I know it is late where you live
N Embedded Cam is sputtering..crackling sound since earlier today .. the time on it is correct... it is windy at H Mills and maybe that is what is affecting the Mic on the N Cam or loose connection ... wondering if a reboot will help ... what do you think? and no rush .. thought I should let you know ..
Thanks
Bev.
5:07p pm nest time
Re Harrison Mills N Embedded Cam
Hi Judy .. I know it is late where you live
N Embedded Cam is sputtering..crackling sound since earlier today .. the time on it is correct... it is windy at H Mills and maybe that is what is affecting the Mic on the N Cam or loose connection ... wondering if a reboot will help ... what do you think? and no rush .. thought I should let you know ..
Thanks
Bev.
Re: Report Cams Down and Forum Errors
Monday , August 19 , 2019
Good Morning Judy ..
Re Harrison Mills
N embedded cam is down I checked the N Direct Access Zoomer Cam and that is streaming ..
Thanks
Bev
Good Morning Judy ..
Re Harrison Mills
N embedded cam is down I checked the N Direct Access Zoomer Cam and that is streaming ..
Thanks
Bev
Re: Report Cams Down and Forum Errors
Done, and the cam is streaming. Sorry for the delay.
2023 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
Thanks Judy and all is good ,
Re: Report Cams Down and Forum Errors
10:00am...........Judy, just letting you know that the embedded cams at Delta2 were off for about 4 hours last night............from just after midnight to just after 4am. When I've been on the cams a few times I'm still noticing lots of spinning circles happening.
All cams seem to fine at the moment.
All cams seem to fine at the moment.
"Volunteers do not necessarily have the time..............they have the heart"..........Elizabeth Andrew
(Member since 9/10/11)
(Member since 9/10/11)
Re: Report Cams Down and Forum Errors
Friday, Aug. 30, 2019: The Chehalis River Fish Hatchery cam seems to have frozen as of 10:45 a.m. today. Streaming resumed at about 1:14 p.m., but then froze up again.
Re: Report Cams Down and Forum Errors
Thanks, Sue. I think they folks at the hatchery are planning to do some work on the cam on Wednesday, moving it a little nearer the channel and pointing it down a bit more. I noticed it was stalled when I checked it - but I had several cams open so thought it might be me.
And I just went to check - and all our embedded cams are down and have been for 24 minutes. I'll contact Ken.
2023 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
Good Afternoon
4:58p
N embeeded Cam is down
N Direct Access Cam is streaming
Thanks
Bev
4:58p
N embeeded Cam is down
N Direct Access Cam is streaming
Thanks
Bev
Re: Report Cams Down and Forum Errors
Thanks Judy .. I sent an e-mail to you and Ken rw H Mills~JudyB wrote: ↑Wed Sep 04, 2019 3:03 pmThanks, Bev - I'll take a look.
The Surrey South embedded cam just came back; the Surrey North embedded is still down - haven't checked the direct link yet.
Added -
It took a while for me to log into Harrison North, but I finally got the control stream and did a reboot, and still cannot connect. I'll send a message to Ken as soon as I finish checking out Surrey North.
Re: Report Cams Down and Forum Errors
3:13p
S Embeeded cam is sputtering
S Embeeded cam is sputtering
Re: Report Cams Down and Forum Errors
Thanks so much JudyJudyB wrote: ↑Wed Sep 04, 2019 3:38 pmI just logged into Harrison South, and the clock was freezing briefly every few seconds, suggesting to me that there's an issue with the internet, not with the cam, so I didn't try a reboot. I'll send an email to Ken, though I'm not sure if there's anything he can do - if we're not getting a stable signal from the cam when we're logged in, the WOWZA server can't get one either. Hopefully things will clear up before too long.
Re: Report Cams Down and Forum Errors
5:55p Nest Time
Both embedded cams are streaming at H Mills
Thank you Ken and Judy!
Both embedded cams are streaming at H Mills
Thank you Ken and Judy!