Report Cams Down and Forum Errors

Report cams up/down or if you need technical assistance.
User avatar
IrishEyes
Forum Assistant
Posts: 120413
Joined: Feb 09, 2018
Location: Nova Scotia, Canada

Re: Report Cams Down and Forum Errors

Post by IrishEyes » Tue Jul 16, 2019 12:40 pm

JudyB wrote:
Tue Jul 16, 2019 12:36 pm
I’ve sent a text to Ken. Should be home and back online in about an hour.


Thanks Judy!
Image

HELPFUL HINTS.......Bev...member since 08/04/09

User avatar
JudyB
Admin
Posts: 17998
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Tue Jul 16, 2019 12:49 pm

There are power outages in the Vancouver area - not sure where Ken lives but the Wowza server could be down.

User avatar
JudyB
Admin
Posts: 17998
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Tue Jul 16, 2019 1:07 pm

Ken says Wowza is streaming - so if embedded cams are still down, it could be a YouTube issue. I’ll be home soon and will check then.

User avatar
IrishEyes
Forum Assistant
Posts: 120413
Joined: Feb 09, 2018
Location: Nova Scotia, Canada

Re: Report Cams Down and Forum Errors

Post by IrishEyes » Tue Jul 16, 2019 1:07 pm

JudyB wrote:
Tue Jul 16, 2019 12:49 pm
There are power outages in the Vancouver area - not sure where Ken lives but the Wowza server could be down.
1:05p

The H Mills cams are back Judy !
screenshot_28.jpg
Image

HELPFUL HINTS.......Bev...member since 08/04/09

User avatar
JudyB
Admin
Posts: 17998
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Tue Jul 16, 2019 1:42 pm

Thanks, Bev! The other embedded cams are also all streaming now.

User avatar
Darlene
Admin
Posts: 1728
Joined: Jan 15, 2018
Location: Langley

Re: Report Cams Down and Forum Errors

Post by Darlene » Sun Jul 21, 2019 6:05 pm

The Delta2 cams are down, embedded cams also.
Darlene, Langley, member since May 10 2006

User avatar
Darlene
Admin
Posts: 1728
Joined: Jan 15, 2018
Location: Langley

Re: Report Cams Down and Forum Errors

Post by Darlene » Sun Jul 21, 2019 10:06 pm

Delta2 cams have been down all evening.
Darlene, Langley, member since May 10 2006

User avatar
Sandy_W
Topic Assistant
Posts: 56669
Joined: Feb 22, 2018
Location: Arkansas

Re: Report Cams Down and Forum Errors

Post by Sandy_W » Mon Jul 22, 2019 2:55 am

2:54 am Delta 2 embedded cams are still down and think have been down since last evening around 5:30 pm.
“Eagles: When they walk, they stumble. They are not what one would call graceful. They were not designed to walk. They fly. And when they fly, oh, how they fly, so free, so graceful. They see from the sky what we never see.” – Unknown

User avatar
JudyB
Admin
Posts: 17998
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Mon Jul 22, 2019 5:29 am

Sandy_W wrote:
Mon Jul 22, 2019 2:55 am
2:54 am Delta 2 embedded cams are still down and think have been down since last evening around 5:30 pm.
Thanks, Darlene and Sandy. I also can't reach the cams with the zoomer links, and the embedded cams are down. I've sent a message to Ken, though it is very early in BC so he may not see it for a while.

User avatar
Darlene
Admin
Posts: 1728
Joined: Jan 15, 2018
Location: Langley

Re: Report Cams Down and Forum Errors

Post by Darlene » Tue Jul 23, 2019 7:34 am

Cams ares till down at Delta2! :bashcomp:

Not a good time for them to go down when these could be the last days of the juvies hanging around.
Darlene, Langley, member since May 10 2006

User avatar
JudyB
Admin
Posts: 17998
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Tue Jul 23, 2019 7:58 am

Darlene wrote:
Tue Jul 23, 2019 7:34 am
Cams ares till down at Delta2! :bashcomp:

Not a good time for them to go down when these could be the last days of the juvies hanging around.
I've sent an email to Ken - not near my phone, but I'll also send a text if I haven't heard from him soon.

User avatar
Lynne
Topic Assistant
Posts: 19087
Joined: Feb 22, 2018

Re: Report Cams Down and Forum Errors

Post by Lynne » Wed Jul 24, 2019 1:25 pm

White Rock North cam needs a reboot (Zoomers are away for now)
Thank you!

User avatar
JudyB
Admin
Posts: 17998
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Wed Jul 24, 2019 3:04 pm

Lynne wrote:
Wed Jul 24, 2019 1:25 pm
White Rock North cam needs a reboot (Zoomers are away for now)
Thank you!
Done!

DDuckies2
Zoomer
Posts: 12148
Joined: Feb 22, 2018
Location: White Rock/Surrey BC

Re: Report Cams Down and Forum Errors

Post by DDuckies2 » Sat Jul 27, 2019 3:15 pm

WHITE ROCK NORTH<
last evening and today while zooming with N it stalls, sometimes turns white, works for a few minutes at first then starts acting up.
Rebooting has not helped.
Note again it works for awhile then freezes and nothing works including the presets.
This is different then what we often have happen when using a preset seems to unlock the freeze.
once it went into panning all by itself :dunno:
:grhug:

User avatar
JudyB
Admin
Posts: 17998
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Sat Jul 27, 2019 3:25 pm

DDuckies2 wrote:
Sat Jul 27, 2019 3:15 pm
WHITE ROCK NORTH<
last evening and today while zooming with N it stalls, sometimes turns white, works for a few minutes at first then starts acting up.
Rebooting has not helped.
Note again it works for awhile then freezes and nothing works including the presets.
This is different then what we often have happen when using a preset seems to unlock the freeze.
once it went into panning all by itself :dunno:
That's different.... And unfortunately I haven't a clue as to what to suggest, other than sending your comments to Ken to see if he has any thoughts.

Were you using or watching the other cams on site while this was happening? I'm wondering if it could be the modem, or if we need a second line there. If the other cams were behaving, it's more likely to be an issue with the cam or its cabling.

Post Reply

Return to “Technical Help”