Page 127 of 379

Re: Report Cams Down and Forum Errors

Posted: Mon Oct 05, 2020 7:15 pm
by Jean
7:15pm.........At Delta2 the sound is sputtering again........and the sound on the embedded cams is too low, particularly the E cam.

Re: Report Cams Down and Forum Errors

Posted: Tue Oct 06, 2020 12:37 am
by JudyB
Jean wrote:
Mon Oct 05, 2020 7:15 pm
7:15pm.........At Delta2 the sound is sputtering again........and the sound on the embedded cams is too low, particularly the E cam.
I've put the volume up a bit. The sputtering may be the bitrate, and I may need to check with Ken about that. Let me know if the sputtering is still a problem in the morning. Thanks!

Re: Report Cams Down and Forum Errors

Posted: Tue Oct 06, 2020 6:13 am
by IrishEyes
TUESDAY, OCTOBER 6, 2020

Good Moriing Judy and all

Re SR Cams..the good news is that they are straining ..TY Ken :thumlft:

The N embedded Cam is stuck at 5:12 pm last evening ..

And while I am here and no rush for the this .. the Time Stamp on the H Mills Cams is smaller then it was making harder to see... I am sure Ken will see to this when he has time ..

Thank you Ken and Judy for all your hard work :hug:

Re: Report Cams Down and Forum Errors

Posted: Tue Oct 06, 2020 7:56 am
by Sandy_W
JudyB wrote:
Tue Oct 06, 2020 12:37 am
Jean wrote:
Mon Oct 05, 2020 7:15 pm
7:15pm.........At Delta2 the sound is sputtering again........and the sound on the embedded cams is too low, particularly the E cam.
I've put the volume up a bit. The sputtering may be the bitrate, and I may need to check with Ken about that. Let me know if the sputtering is still a problem in the morning. Thanks!
Good morning, Judy. Just got off the zooming and the only sound I am hearing now is a humming with a bit of an occasional slight pop from the east embedded cam.

Re: Report Cams Down and Forum Errors

Posted: Tue Oct 06, 2020 8:17 am
by JudyB
Sandy_W wrote:
Tue Oct 06, 2020 7:56 am
JudyB wrote:
Tue Oct 06, 2020 12:37 am
Jean wrote:
Mon Oct 05, 2020 7:15 pm
7:15pm.........At Delta2 the sound is sputtering again........and the sound on the embedded cams is too low, particularly the E cam.
I've put the volume up a bit. The sputtering may be the bitrate, and I may need to check with Ken about that. Let me know if the sputtering is still a problem in the morning. Thanks!
Good morning, Judy. Just got off the zooming and the only sound I am hearing now is a humming with a bit of an occasional slight pop from the east embedded cam.
Thanks, Sandy - and it's a foggy day with no wind (and was the middle of the night when I made the adjustment) - so I don't know how to set it so you will be able to hear birds singing or leaves rustling unless there's some sort of sound that I know is there. I think I need to pull the volume back a bit to reduce the hum - but until there's some background noise, I'm not sure how to proceed. If any of you hear work going on or anything that might last long enough for me to log into the cam, please send me a PM as I might see that faster than a message here (though I do have notifications set for this thread, so posting here should also work).

Re: Report Cams Down and Forum Errors

Posted: Tue Oct 06, 2020 1:55 pm
by Sandy_W
1:53 pm from Delta 2 regarding the popping sounds and humming, Judy, I just got off the cams and the sounds I heard this morning are no longer being heard. Just hear the normal sounds of the nest area with a bit of breeze blowing and some sounds of vehicles around the area. So your magic maybe working.

Re: Report Cams Down and Forum Errors

Posted: Wed Oct 07, 2020 5:35 am
by IrishEyes
Wednesday , Oct.7 , 2020

Good Morming Judy

5:26a
Harrison Mills Embedded cams are down.. I can connect to the PTZ Ones

Thank You
Bev

Re: Report Cams Down and Forum Errors

Posted: Wed Oct 07, 2020 6:31 am
by SueB
Good Morning All! Delta 2 Embedded cams are also down.....based on one viewer's post Delta...they were down around 5:30 am.

Re: Report Cams Down and Forum Errors

Posted: Wed Oct 07, 2020 7:06 am
by JudyB
Good morning, everyone. It looks as if all the embedded cams are down. I know Ken was planning to move the server to a location with an even higher speed internet connection than his high speed connection to see if that will help, so that may be what is happening now. I'll post an update when I learn more.

Re: Report Cams Down and Forum Errors

Posted: Wed Oct 07, 2020 7:17 am
by IrishEyes
JudyB wrote:
Wed Oct 07, 2020 7:06 am
Good morning, everyone. It looks as if all the embedded cams are down. I know Ken was planning to move the server to a location with an even higher speed internet connection than his high speed connection to see if that will help, so that may be what is happening now. I'll post an update when I learn more.

Thank you Judy and good luck Ken ~

Re: Report Cams Down and Forum Errors

Posted: Wed Oct 07, 2020 4:36 pm
by Darlene
4:35 The Delta cams have been down for at least a half hour.

Re: Report Cams Down and Forum Errors

Posted: Thu Oct 08, 2020 6:39 pm
by Jean
6:37pm......Embedded cams still down at Delta2. Also wanted to say that the controls of the zoomer cams are really sloppy right now and have been for a few days. Delayed reactions, overshooting the target etc. and cams seem to be panning slower than they should considering the settings.

Re: Report Cams Down and Forum Errors

Posted: Fri Oct 09, 2020 7:52 am
by IrishEyes
FRIDAY, October 9. 2020,

Good Morning Judy

Re H Mills
S Cam is down .... N Cam is pixelating badly

Thank you

Bev

Re: Report Cams Down and Forum Errors

Posted: Fri Oct 09, 2020 9:46 am
by JudyB
9:37 am
All embedded cams appear to be down except Surrey North, which I'm streaming to YouTube from my computer so it's not going through Ken's system. Ken said he was likely to move the his server to a place with a faster connection in case the upload speed at his house was an issue. (He has very fast service - but is trying to stream 9 cams at full high res, which takes a lot of bandwidth.)

My personal thought is that we'll need to put some of the cams back from 1080p HD to 720p - so they won't be as sharp at full screen, but will be less likely to have the signal break up or pixelate or the sound go choppy - but we'd like to have the biggest best images possible, so we're trying that first.

Note - Surrey North is currently streaming at a low res 360p and being digitally stretched to 720 - which is keeping it running fairly smoothly, but it's not the crisp image you'd get if the signal from the cam was higher. We're hoping most other cams will be able to stream at 720 (which is twice as wide and twice as high, so potentially uses more than twice the bandwidth) - and with luck some will stream smoothly at 1080 (Delta cams should do that, but even they have been having some issues, which is part of the reason Ken is trying to upgrade his speed).

Re: Report Cams Down and Forum Errors

Posted: Fri Oct 09, 2020 10:19 am
by Kitcat11848
Judy B, I've been having trouble with the forum loading slowing and at some nests, they only half load. Is this because of Ken moving the system, I don't seem to have the problem on non HWF cams like Berry; HM is the worst.