Report Cams Down and Forum Errors

[JudyB]

Thanks, Bev - I've sent a message to Ken.

He is also still trying to get the new CU cam at White Rock streaming, and may make a site visit to check the hookup at the base of the tree.

And the North cam at White Rock is down - it stopped streaming over 90 minutes ago, and I can't log in using the direct link. I've also sent Ken a message about that.

[JudyB]

11:30 am
Just lost all the embedded cams - am guessing that Ken is rebooting his system or something of that nature.


11:46 am
The cams that are streaming are back; direct links for the White Rock new CU cam and the North cam are down, making me think Ken may be working at the site.

[IrishEyes]

Thanks, Bev - I've sent a message to Ken.

He is also still trying to get the new CU cam at White Rock streaming, and may make a site visit to check the hookup at the base of the tree.

And the North cam at White Rock is down - it stopped streaming over 90 minutes ago, and I can't log in using the direct link. I've also sent Ken a message about that.

Thanks Judy

[IrishEyes]

WEDNESDAY , AUGUST 26, 2020

Good Morning Judy

Re SR N Cam

5:09am
N cam is pixelating


Thank you

Bev

[JudyB]

WEDNESDAY , AUGUST 26, 2020

Good Morning Judy

Re SR N Cam

5:09am
N cam is pixelating


Thank you

Bev

Thanks for posting, Bev! I've rebooted the North cam at Surrey, and also sent Ken a reminder that the South cam at Harrison Mills is down.

It looks as if Ken was not able to get the new West/close-up cam at White Rock streaming to the web yesterday - I'll try to get an update on that later today. The cam is streaming, and zoomers can log in and look around, but for some reason the Wowza can't seem to connect.

[IrishEyes]

WEDNESDAY , AUGUST 26, 2020

Good Morning Judy

Re SR N Cam

5:09am
N cam is pixelating


Thank you

Bev

Thanks for posting, Bev! I've rebooted the North cam at Surrey, and also sent Ken a reminder that the South cam at Harrison Mills is down.

It looks as if Ken was not able to get the new West/close-up cam at White Rock streaming to the web yesterday - I'll try to get an update on that later today. The cam is streaming, and zoomers can log in and look around, but for some reason the Wowza can't seem to connect.

You are welcome Judy and thank you for the reminder to Ken about the S Cam at H Mills..... I hope the issue with the Wowza is resolved soon.

[amyklai]

6.18p NORTH cam is frozen at WR ,rebooted twice , but nothing

[JudyB]

6.18p NORTH cam is frozen at WR ,rebooted twice , but nothing

Thanks, amy. I also tried a reboot after waiting a bit - and nothing happened for me either. I've sent an email to Ken.

[IrishEyes]

THURSDAY , AUGUST 27, 2020

Good Morning Judy

Re Harrison Mills
4:38a Nest Time
Both Embedded Cams are down

I can connect to both PTZ Cams

Thank You

Bev

[JudyB]

THURSDAY , AUGUST 27, 2020

Good Morning Judy

Re Harrison Mills
4:38a Nest Time
Both Embedded Cams are down

I can connect to both PTZ Cams

Thank You

Bev

I tried rebooting North but it didn't help; I'll send a message to Ken once I've had some coffee.

[IrishEyes]

THURSDAY , AUGUST 27, 2020

Good Morning Judy

Re Harrison Mills
4:38a Nest Time
Both Embedded Cams are down

I can connect to both PTZ Cams

Thank You

Bev

I tried rebooting North but it didn't help; I'll send a message to Ken once I've had some coffee.

Thanks Judy ~ Take your time and enjoy your coffee

[amyklai]

6.18p NORTH cam is frozen at WR ,rebooted twice , but nothing

Thanks, amy. I also tried a reboot after waiting a bit - and nothing happened for me either. I've sent an email to Ken.

Thank you Judy , its streaming fine this morning , as an FYI we are going camping tomorrow for 10 days , so I wont be around much , also signal maybe be bad for cell phone

[JudyB]

6.18p NORTH cam is frozen at WR ,rebooted twice , but nothing

Thanks, amy. I also tried a reboot after waiting a bit - and nothing happened for me either. I've sent an email to Ken.

Thank you Judy , its streaming fine this morning , as an FYI we are going camping tomorrow for 10 days , so I wont be around much , also signal maybe be bad for cell phone

Thanks for letting me know, amy - have a wonderful time!

[amyklai]

Thanks, amy. I also tried a reboot after waiting a bit - and nothing happened for me either. I've sent an email to Ken.

Thank you Judy , its streaming fine this morning , as an FYI we are going camping tomorrow for 10 days , so I wont be around much , also signal maybe be bad for cell phone

Thanks for letting me know, amy - have a wonderful time!

Thanks Judy, rebooting North this morning , it needs it daily

[IrishEyes]

SATURDAY , AUGUST 29, 2020

Good Morning Judy

Re N Embedded Cam at H Mills

It has been buffering since 6:03pm yesterday

Maybe a reboot will help

Thank You
Bev

ETA ... N PTZ is fine

[JudyB]

SATURDAY , AUGUST 29, 2020

Good Morning Judy

Re N Embedded Cam at H Mills

It has been buffering since 6:03pm yesterday

Maybe a reboot will help

Thank You
Bev

ETA ... N PTZ is fine

Thanks for posting, Bev - reboot done and it appears to be streaming smoothly.

[IrishEyes]

SATURDAY , AUGUST 29, 2020

Good Morning Judy

Re N Embedded Cam at H Mills

It has been buffering since 6:03pm yesterday

Maybe a reboot will help

Thank You
Bev

ETA ... N PTZ is fine

Thanks for posting, Bev - reboot done and it appears to be streaming smoothly.

Than you Judy !

[IrishEyes]

SUNDAY , AUGUST 30, 2020

Good Morning Judy -

The N Embedded Cam is sputtering at H Mills..maybe a reboot will help

Thank You
Bev

[JudyB]

SUNDAY , AUGUST 30, 2020

Good Morning Judy -

The N Embedded Cam is sputtering at H Mills..maybe a reboot will help

Thank You
Bev

Done!

[IrishEyes]

SUNDAY , AUGUST 30, 2020

Good Morning Judy -

The N Embedded Cam is sputtering at H Mills..maybe a reboot will help

Thank You
Bev

Done!

Thank you Judy!

[IrishEyes]

MONDAY , AUGUST 31, 2020

Good Morning Judy !

Re N Embedded Cam at H Mills

3:11am nest time
It has spinning circle since 8:28p August 30

Maybe a reboot will help when you have time.

Thank you
Bev

[JudyB]

MONDAY , AUGUST 31, 2020

Good Morning Judy !

Re N Embedded Cam at H Mills

3:11am nest time
It has spinning circle since 8:28p August 30

Maybe a reboot will help when you have time.

Thank you
Bev

A reboot might fix it temporarily, but Ken's warned me against doing that too often, and it's not solving the problem for more than a day, so I've sent an email to Ken asking him to take a look.

[IrishEyes]

MONDAY , AUGUST 31, 2020

Good Morning Judy !

Re N Embedded Cam at H Mills

3:11am nest time
It has spinning circle since 8:28p August 30

Maybe a reboot will help when you have time.

Thank you
Bev

A reboot might fix it temporarily, but Ken's warned me against doing that too often, and it's not solving the problem for more than a day, so I've sent an email to Ken asking him to take a look.

Thanks so much Judy .. I hope Ken can help

[IrishEyes]

TUESDAY , SEPTEMBER 1, 2020

HI Judy

Re the N Embedded Cam at H Mills

5:17pm Nest time ....

The N Embedded Cam at H Mills has spinning circle and stopped streaming at 1:52pm

I am truly sorry for bothering you with this again

Thank You

Bev

[JudyB]

Not a bother, Bev - and done.

But I'd like to know why it's having so many issues, and am hoping Ken will be able to get out to HM to take a look soon.

[JudyB]

September 2 2020

I'm rebooting Harrison Mills North - it seems to be stuck at 5:03 am and I know Ken is busy today.

[IrishEyes]

Not a bother, Bev - and done.

But I'd like to know why it's having so many issues, and am hoping Ken will be able to get out to HM to take a look soon.

Thank you Judy

[IrishEyes]

WEDNESDAY , SEPT.3, 2020


Good Morning Judy,.....I can think of netter ways to communicate I am hoping to come here soon with better news ...

Re H Mills

4:23a
N Embedded Cam is down..... I can connect to the NPTZ Cam


Thank You
Bev.

[IrishEyes]

FRIDAY, SEPTEMBER 4, 2020

Good Morning Judy ! 'Me again ..

The N Cam at H Mills has spinning circle since 7:23pm last night .. the NPTZ Cam is streaming

Thank You

Bev

[IrishEyes]

HI again Judy!

7:18a Nest time..... The N Cam at SR is sputtering ... I think a reboot will help

Than You

Bev