Report Cams Down and Forum Errors

Report cams up/down or if you need technical assistance.
Post Reply
User avatar
IrishEyes
Forum Assistant
Posts: 43701
Joined: Feb 09, 2018
Location: Nova Scotia, Canada

Re: Report Cams Down and Forum Errors

Post by IrishEyes » Tue Jul 10, 2018 3:08 pm

JudyB wrote:
Tue Jul 10, 2018 3:03 pm
2:58 pm
HM cams are still down. I just checked with Ken, and he has not made any progress getting a new modem there. He'll be seeing David Hancock tomorrow, and hopefully the two of them will be able to arrange for that to happen. I've tried logging in to the zoomer links a couple of times in the last hour or so, and haven't had any success.
Thanks Judy .. :luck: that Ken and David Hancock will be able to arrange for new modern.. I was also checking the cams and no luck!
Image

HELPFUL HINTS...Be Respectful !....Bev...member since 08/04/09

User avatar
IrishEyes
Forum Assistant
Posts: 43701
Joined: Feb 09, 2018
Location: Nova Scotia, Canada

Re: Report Cams Down and Forum Errors

Post by IrishEyes » Wed Jul 11, 2018 6:58 am

WEDNESDAY , JULY 11, 2018

Good Morning !

RE Harrison Mills

6:55a..The embedded and direct access cams are all down,.they came back for a min. at 5:44am after being down 11 hours

Thank you

Bev
Image

HELPFUL HINTS...Be Respectful !....Bev...member since 08/04/09

User avatar
SueB
Zoomer
Posts: 23128
Joined: Feb 20, 2018
Location: SW Florida

Re: Report Cams Down and Forum Errors

Post by SueB » Thu Jul 12, 2018 7:33 am

Good Morning All! Delta cams are stuttering and going off and on.

User avatar
Jean
Topic Assistant
Posts: 15264
Joined: Feb 19, 2018
Location: Langley, BC

Re: Report Cams Down and Forum Errors

Post by Jean » Thu Jul 12, 2018 9:34 am

SueB wrote:
Thu Jul 12, 2018 7:33 am
Good Morning All! Delta cams are stuttering and going off and on.

To add to Sue's post here.........I can see she had much difficulty with the controls and finally signed off the cams because of this. Last night as I was zooming the same thing happened. Cams were pretty good yesterday until all of a sudden it changed during the zoom time after supper. Spinning circles, cams going off and on and controls which became very stubborn to move.
"Volunteers do not necessarily have the time..............they have the heart"..........Elizabeth Andrew

(Member since 9/10/11)

User avatar
Jean
Topic Assistant
Posts: 15264
Joined: Feb 19, 2018
Location: Langley, BC

Re: Report Cams Down and Forum Errors

Post by Jean » Sun Jul 15, 2018 2:52 pm

2:51pm...........All cams at Delta2 have been continually going off for about 2 hours now. Zoomer cams impossible to use.
"Volunteers do not necessarily have the time..............they have the heart"..........Elizabeth Andrew

(Member since 9/10/11)

User avatar
JudyB
Admin
Posts: 4420
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Sun Jul 15, 2018 4:53 pm

Thanks, Jean and Sue - I'll check to see if anyone is zooming and try rebooting them.

txsun
Zoomer
Posts: 662
Joined: Apr 15, 2018
Location: San Antonio, TX

Re: Report Cams Down and Forum Errors

Post by txsun » Sun Jul 15, 2018 7:08 pm

ditto what Jean said about delta.. still now 7:06pm Thanks Judy for reboot, but still coming and going. Zoomie impossible.
~ Bonnie ~
Member since 09/29/2012

User avatar
SueB
Zoomer
Posts: 23128
Joined: Feb 20, 2018
Location: SW Florida

Re: Report Cams Down and Forum Errors

Post by SueB » Mon Jul 16, 2018 1:20 pm

Good Afternoon All! Cams are stuttering/stalling, going down at Delta 2. Hard to zoom around with this happening.

User avatar
IrishEyes
Forum Assistant
Posts: 43701
Joined: Feb 09, 2018
Location: Nova Scotia, Canada

Re: Report Cams Down and Forum Errors

Post by IrishEyes » Mon Jul 16, 2018 1:30 pm

Good Afternoon...


Re H Mills

As of 12:30 pm today...all the our cams had been down 20 hours ~
Image

HELPFUL HINTS...Be Respectful !....Bev...member since 08/04/09

User avatar
SueB
Zoomer
Posts: 23128
Joined: Feb 20, 2018
Location: SW Florida

Re: Report Cams Down and Forum Errors

Post by SueB » Mon Jul 16, 2018 1:53 pm

SueB wrote:
Mon Jul 16, 2018 1:20 pm
Good Afternoon All! Cams are stuttering/stalling, going down at Delta 2. Hard to zoom around with this happening.
Update: All cams went down for about 15 minutes and just before I was going to post an update they came up so I had not posted that they were down that long. Cams came up for about 2 minutes and back down again....now another 10 minutes down. Cams are in positions away from the sun and I will say that I am not off the cams although I didn't officially log out of them myself, but can't stay around and wait for them to come back.

User avatar
Jean
Topic Assistant
Posts: 15264
Joined: Feb 19, 2018
Location: Langley, BC

Re: Report Cams Down and Forum Errors

Post by Jean » Mon Jul 16, 2018 9:16 pm

9:14pm........Zoomer cams at Delta2 have been nothing but trouble tonight since 7:45pm............Controls won't move the cams when pressed..........all cams going down.........and starting about a half hour ago, the cams won't stay up at all! Going off continually.
"Volunteers do not necessarily have the time..............they have the heart"..........Elizabeth Andrew

(Member since 9/10/11)

User avatar
SueB
Zoomer
Posts: 23128
Joined: Feb 20, 2018
Location: SW Florida

Re: Report Cams Down and Forum Errors

Post by SueB » Tue Jul 17, 2018 6:52 am

Good Morning All! Delta 2 cams all went down around 5 minutes ago.

User avatar
JudyB
Admin
Posts: 4420
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Tue Jul 17, 2018 8:31 am

8:29 am
Both Delta embedded cams seem to be up, though they are quite choppy to watch.

And they both went down at 8:30 am.

I'll see if I can log into the zoomer link and reboot them.

Cheryldavis
Topic Assistant
Posts: 4183
Joined: Feb 21, 2018
Location: England

Re: Report Cams Down and Forum Errors

Post by Cheryldavis » Wed Jul 18, 2018 5:25 am

Delta 2 cams 5.24am 18/7/18 keep crashing. Zoomer cams are also crashing.
"If you hang out with chickens, you are going to cluck and if you hang out with eagles, you are going to fly! " Dr Steve Maraboli

User avatar
Jean
Topic Assistant
Posts: 15264
Joined: Feb 19, 2018
Location: Langley, BC

Re: Report Cams Down and Forum Errors

Post by Jean » Wed Jul 18, 2018 9:25 am

9:25am..........All cams at Delta2 have gone down several times this morning.....they are current off.
1.JPG
"Volunteers do not necessarily have the time..............they have the heart"..........Elizabeth Andrew

(Member since 9/10/11)

User avatar
JudyB
Admin
Posts: 4420
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Wed Jul 18, 2018 10:24 am

Jean wrote:
Wed Jul 18, 2018 9:25 am
9:25am..........All cams at Delta2 have gone down several times this morning.....they are current off.
10:20 am
Looks as if they are back up now, Jean, and they've been streaming OK in the minute or two I've been watching (seconds aren't skipping on the time stamp and sound isn't going in and out). Maybe Ken did a reboot - or it may be one of those quirky things that seem to be happening with these cams.

11:33 pm
Well, that didn't last - just lost them both, though they were back a minute later (I'm just viewing the embedded cams). And for the moment they're streaming smoothly.

User avatar
Jean
Topic Assistant
Posts: 15264
Joined: Feb 19, 2018
Location: Langley, BC

Re: Report Cams Down and Forum Errors

Post by Jean » Wed Jul 18, 2018 10:35 am

JudyB wrote:
Wed Jul 18, 2018 10:24 am
Jean wrote:
Wed Jul 18, 2018 9:25 am
9:25am..........All cams at Delta2 have gone down several times this morning.....they are current off.
10:20 am
Looks as if they are back up now, Jean, and they've been streaming OK in the minute or two I've been watching (seconds aren't skipping on the time stamp and sound isn't going in and out). Maybe Ken did a reboot - or it may be one of those quirky things that seem to be happening with these cams.

11:33 pm
Well, that didn't last - just lost them both, though they were back a minute later (I'm just viewing the embedded cams). And for the moment they're streaming smoothly.
Thanks Judy........hope they will be fine for a while now.
"Volunteers do not necessarily have the time..............they have the heart"..........Elizabeth Andrew

(Member since 9/10/11)

User avatar
SueB
Zoomer
Posts: 23128
Joined: Feb 20, 2018
Location: SW Florida

Re: Report Cams Down and Forum Errors

Post by SueB » Wed Jul 18, 2018 1:53 pm

Good Afternoon! Delta 2 cams continue to stall and go off and on.

Cheryldavis
Topic Assistant
Posts: 4183
Joined: Feb 21, 2018
Location: England

Re: Report Cams Down and Forum Errors

Post by Cheryldavis » Thu Jul 19, 2018 6:02 am

19th July 2018 Delta time about 6 - 7am

The Delta cams have been off for half an hour and counting.
"If you hang out with chickens, you are going to cluck and if you hang out with eagles, you are going to fly! " Dr Steve Maraboli

User avatar
SueB
Zoomer
Posts: 23128
Joined: Feb 20, 2018
Location: SW Florida

Re: Report Cams Down and Forum Errors

Post by SueB » Thu Jul 19, 2018 6:56 am

Cheryldavis wrote:
Thu Jul 19, 2018 6:02 am
19th July 2018 Delta time about 6 - 7am

The Delta cams have been off for half an hour and counting.
Update on Delta Cams
2018-07-19 09_55_25-Delta 2 Cams - Hancock Wildlife Foundation.jpg

User avatar
Jean
Topic Assistant
Posts: 15264
Joined: Feb 19, 2018
Location: Langley, BC

Re: Report Cams Down and Forum Errors

Post by Jean » Thu Jul 19, 2018 10:26 am

10:25am.............Was on the zoomer cams at Delta2 for about 25 minutes.......They are working fine. But the embedded cams are off and although it usually says they last streamed "X" amount of time ago.............there is nothing like this showing this time.
"Volunteers do not necessarily have the time..............they have the heart"..........Elizabeth Andrew

(Member since 9/10/11)

User avatar
Jean
Topic Assistant
Posts: 15264
Joined: Feb 19, 2018
Location: Langley, BC

Re: Report Cams Down and Forum Errors

Post by Jean » Thu Jul 19, 2018 2:16 pm

2:15pm.....Embedded cams still down at Delta2. They have been off for hours, most of the day here.
"Volunteers do not necessarily have the time..............they have the heart"..........Elizabeth Andrew

(Member since 9/10/11)

User avatar
JudyB
Admin
Posts: 4420
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Thu Jul 19, 2018 2:17 pm

Jean wrote:
Thu Jul 19, 2018 2:16 pm
2:15pm.....Embedded cams still down at Delta2. They have been off for hours, most of the day here.
I'll try rebooting one of them and see if that helps, and will check the YouTube page to see if there's a clue there. If that doesn't work, I'll call Ken.

Thanks for also sending an email - I've been out this afternoon so just getting to messages now.

User avatar
JudyB
Admin
Posts: 4420
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Thu Jul 19, 2018 2:31 pm

I rebooted East and it didn't help. The YouTube admin page said the stream health was good - but also said the stream was offline - which generally means the problem is not something I can fix. I called Ken, and he's taking a look.


2:51 pm
Delta 2 embedded cams are back - Thanks, Ken! :thumlft:

User avatar
SueB
Zoomer
Posts: 23128
Joined: Feb 20, 2018
Location: SW Florida

Re: Report Cams Down and Forum Errors

Post by SueB » Thu Jul 19, 2018 6:42 pm

Good Evening All! I just noticed that the W Embedded Cam for Delta 2 has been offline for 22 minutes. I'm not on the cams so unsure if both zoomer cams are working but will try to log into the W Cam to check it out.

Edit: I logged into the W Zoomer cam and now the W Embedded cam is up. Unfortunately I can't stay on the cam so hoping the embedded cam stays up after I log off the zoomer cam.

User avatar
Yolande
Topic Assistant
Posts: 5649
Joined: Feb 22, 2018

Re: Report Cams Down and Forum Errors

Post by Yolande » Thu Jul 19, 2018 9:48 pm

All cams down at HM at 9:35pm.

Thanks!

User avatar
JudyB
Admin
Posts: 4420
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Fri Jul 20, 2018 7:27 am

7:18 am

Both Harrison Mills cams are streaming with the current time; DVR suggests they've been up for about 2 hours. Thanks for posting, Yolande - not sure if Ken did something or if they came back on their own.

Both Delta 2 cams are streaming with the current time; DVR suggests they've been up for over 4 hours, so your plan may have worked, Sue.

White Rock CU and WA are streaming; North says it was live 21 minutes ago. I rebooted North, and it's now streaming, and the other two cams are still streaming.

This may be a record - all seven cams are actually working!

User avatar
IrishEyes
Forum Assistant
Posts: 43701
Joined: Feb 09, 2018
Location: Nova Scotia, Canada

Re: Report Cams Down and Forum Errors

Post by IrishEyes » Fri Jul 20, 2018 11:16 am

Good Morning

Re H Mills ...

I tuned in at 10:29am and both cams are down 57mins.


Thank You !
Image

HELPFUL HINTS...Be Respectful !....Bev...member since 08/04/09

User avatar
SueB
Zoomer
Posts: 23128
Joined: Feb 20, 2018
Location: SW Florida

Re: Report Cams Down and Forum Errors

Post by SueB » Sun Jul 22, 2018 7:32 am

Good Morning All! Delta 2 cams flickered/stalled a couple times and are now down. This seems to happen every Sunday....I think. The cams have come back a couple times but are stalled as soon as they come up and then they go off again. Hoping someone can do a reset or something.

User avatar
JudyB
Admin
Posts: 4420
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Sun Jul 22, 2018 8:14 am

Delta 2 and Harrison Mills cams are all up now (8:10 am); I'll watch Delta 2 for a little while and try a reboot if it's still going down (and Ken may have recently done a reboot - I think he does that if he notices that they are having issues). I'll also check the Observation thread as I see we have a zoomer - who has found an adult on a pole.

Post Reply

Return to “Technical Help”