Page 117 of 379
Re: Report Cams Down and Forum Errors
Posted: Tue Sep 01, 2020 5:37 pm
by IrishEyes
TUESDAY , SEPTEMBER 1, 2020
HI Judy
Re the N Embedded Cam at H Mills
5:17pm Nest time ....
The N Embedded Cam at H Mills has spinning circle and stopped streaming at 1:52pm
I am truly sorry for bothering you with this again
Thank You
Bev
Re: Report Cams Down and Forum Errors
Posted: Tue Sep 01, 2020 7:53 pm
by JudyB
Not a bother, Bev - and done.
But I'd like to know why it's having so many issues, and am hoping Ken will be able to get out to HM to take a look soon.
Re: Report Cams Down and Forum Errors
Posted: Wed Sep 02, 2020 7:55 am
by JudyB
September 2 2020
I'm rebooting Harrison Mills North - it seems to be stuck at 5:03 am and I know Ken is busy today.
Re: Report Cams Down and Forum Errors
Posted: Wed Sep 02, 2020 8:13 am
by IrishEyes
JudyB wrote: ↑Tue Sep 01, 2020 7:53 pm
Not a bother, Bev - and done.
But I'd like to know why it's having so many issues, and am hoping Ken will be able to get out to HM to take a look soon.
Thank you Judy
Re: Report Cams Down and Forum Errors
Posted: Thu Sep 03, 2020 4:34 am
by IrishEyes
WEDNESDAY , SEPT.3, 2020
Good Morning Judy,.....I can think of netter ways to communicate
I am hoping to come here soon with better news ...
Re H Mills
4:23a
N Embedded Cam is down..... I can connect to the NPTZ Cam
Thank You
Bev.
Re: Report Cams Down and Forum Errors
Posted: Fri Sep 04, 2020 4:33 am
by IrishEyes
FRIDAY, SEPTEMBER 4, 2020
Good Morning Judy ! 'Me again ..
The N Cam at H Mills has spinning circle since 7:23pm last night .. the NPTZ Cam is streaming
Thank You
Bev
Re: Report Cams Down and Forum Errors
Posted: Fri Sep 04, 2020 7:31 am
by IrishEyes
HI again Judy!
7:18a Nest time..... The N Cam at SR is sputtering ... I think a reboot will help
Than You
Bev
Re: Report Cams Down and Forum Errors
Posted: Fri Sep 04, 2020 8:10 am
by IrishEyes
JudyB wrote: ↑Fri Sep 04, 2020 7:57 am
Thanks, Bev - I'll send Ken a message about both cams.
Thank you Judy!
Re: Report Cams Down and Forum Errors
Posted: Sat Sep 05, 2020 5:01 am
by IrishEyes
SATURDAY, SEPTEMBER 5, 2020
Good Morning Judy !
The H Mills N Embedded Cam has spinning circle since shortly after midnight
I can connect to the NPTZ Cam
Thank you
Bev
Re: Report Cams Down and Forum Errors
Posted: Sat Sep 05, 2020 8:33 am
by JudyB
IrishEyes wrote: ↑Sat Sep 05, 2020 5:01 am
SATURDAY, SEPTEMBER 5, 2020
Good Morning Judy !
The H Mills N Embedded Cam has spinning circle since shortly after midnight
I can connect to the NPTZ Cam
Thank you
Bev
Thanks, Bev! I've rebooted HM North, and the embedded cam seems to be streaming smoothly.
I also rebooted SR North.
Re: Report Cams Down and Forum Errors
Posted: Sat Sep 05, 2020 8:33 am
by JudyB
JudyB wrote: ↑Sat Sep 05, 2020 8:33 am
IrishEyes wrote: ↑Sat Sep 05, 2020 5:01 am
SATURDAY, SEPTEMBER 5, 2020
Good Morning Judy !
The H Mills N Embedded Cam has spinning circle since shortly after midnight
I can connect to the NPTZ Cam
Thank you
Bev
Thanks, Bev! I've rebooted HM North, and the embedded cam seems to be streaming smoothly.
I also rebooted SR North. All the other embedded cams appeared to be streaming.
Re: Report Cams Down and Forum Errors
Posted: Sat Sep 05, 2020 9:06 am
by IrishEyes
JudyB wrote: ↑Sat Sep 05, 2020 8:33 am
JudyB wrote: ↑Sat Sep 05, 2020 8:33 am
IrishEyes wrote: ↑Sat Sep 05, 2020 5:01 am
SATURDAY, SEPTEMBER 5, 2020
Good Morning Judy !
The H Mills N Embedded Cam has spinning circle since shortly after midnight
I can connect to the NPTZ Cam
Thank you
Bev
Thanks, Bev! I've rebooted HM North, and the embedded cam seems to be streaming smoothly.
I also rebooted SR North. All the other embedded cams appeared to be streaming.
Thank you Judy !
Re: Report Cams Down and Forum Errors
Posted: Sun Sep 06, 2020 5:34 am
by IrishEyes
SUNDAY, SEPTEMBER 6, 2020
Good Morning Judy!
Re N Embedded N Cam at H Mills
Spinning circle since 7:08 pm last night
NPTZ Cam is streaming
Thank you
Bev
Re: Report Cams Down and Forum Errors
Posted: Sun Sep 06, 2020 8:17 am
by JudyB
Good morning, Bev and all.
I'm rebooting Surrey North now, and then will reboot Harrison North.
I believe it's a long holiday weekend in Canada the same as it is in the US, so I'll wait until Tuesday to call Ken to discuss the ongoing issues with these two cams and White Rock North (which also needs to be rebooted at least once a day and often more), and to find out if there are any plans to work on the fish cam.
(I know it's a ridiculous suggestion - but I'm tempted to rename the three North cams to see if that would help....
)
Have a good weekend, everyone!
Re: Report Cams Down and Forum Errors
Posted: Sun Sep 06, 2020 9:07 am
by IrishEyes
JudyB wrote: ↑Sun Sep 06, 2020 8:17 am
Good morning, Bev and all.
I'm rebooting Surrey North now, and then will reboot Harrison North.
I believe it's a long holiday weekend in Canada the same as it is in the US, so I'll wait until Tuesday to call Ken to discuss the ongoing issues with these two cams and White Rock North (which also needs to be rebooted at least once a day and often more), and to find out if there are any plans to work on the fish cam.
(I know it's a ridiculous suggestion - but I'm tempted to rename the three North cams to see if that would help....
)
Have a good weekend, everyone!
Thank you Judy .. good one JudyLOL
Enjoy your weekend