Report Cams Down and Forum Errors

Report cams up/down or if you need technical assistance.
Post Reply
Cheryldavis
Topic Assistant
Posts: 4183
Joined: Feb 21, 2018
Location: England

Re: Report Cams Down and Forum Errors

Post by Cheryldavis » Tue Jul 03, 2018 8:46 am

JudyB wrote:
Tue Jul 03, 2018 8:30 am
8:29 am
Delta embedded cams are back - Ken may have noticed and given them a reboot.
Yes they didn't stay down long. Thank you
"If you hang out with chickens, you are going to cluck and if you hang out with eagles, you are going to fly! " Dr Steve Maraboli

User avatar
Sandy_W
Topic Assistant
Posts: 19118
Joined: Feb 22, 2018
Location: Arkansas

Re: Report Cams Down and Forum Errors

Post by Sandy_W » Tue Jul 03, 2018 1:42 pm

Delta 2 zoomer cams and embedded cams both offline at 1:39 pm. Having issues with both cams stalling and stuttering while zooming as well.

Edit: still having online issues with the cams for zoomer and embedded cams going off line. 3:13 pm offline. The zoomer cams and the embedded cams will not stay online. Come on for about say..a minute then offline again. It is back and forth and making almost impossible to use the zoomer cams as they freeze in the middle of zooming.
“Eagles: When they walk, they stumble. They are not what one would call graceful. They were not designed to walk. They fly. And when they fly, oh, how they fly, so free, so graceful. They see from the sky what we never see.” – Unknown

User avatar
Sandy_W
Topic Assistant
Posts: 19118
Joined: Feb 22, 2018
Location: Arkansas

Re: Report Cams Down and Forum Errors

Post by Sandy_W » Tue Jul 03, 2018 5:50 pm

5:36 pm Delta 2 zoomer cam and embedded cams went down again. JudyB rebooted around 3:52 pm and worked fine until 4:33 pm when they began going down again. Since this time, they have gone offline six time for approximately 5 minutes down to less than a minute. As I post this is time, they have been offline for 15 minutes.
“Eagles: When they walk, they stumble. They are not what one would call graceful. They were not designed to walk. They fly. And when they fly, oh, how they fly, so free, so graceful. They see from the sky what we never see.” – Unknown

User avatar
Jean
Topic Assistant
Posts: 16007
Joined: Feb 19, 2018
Location: Langley, BC

Re: Report Cams Down and Forum Errors

Post by Jean » Tue Jul 03, 2018 9:46 pm

9:45pm........Just to add to the above posts..........I was on the zoomer cams at Delta for about 4-30 minutes...........cams went down at least twice.
"Volunteers do not necessarily have the time..............they have the heart"..........Elizabeth Andrew

(Member since 9/10/11)

User avatar
Sandy_W
Topic Assistant
Posts: 19118
Joined: Feb 22, 2018
Location: Arkansas

Re: Report Cams Down and Forum Errors

Post by Sandy_W » Wed Jul 04, 2018 5:58 am

Delta 2 cams: July 4, 2018, Last night the embedded cams were off and on. And this morning, zoomer cams and embedded cams are cycling on and off, freezing and then coming back. Lost count the number of times since 4:08 the times this has happened when zoomer began zooming.
“Eagles: When they walk, they stumble. They are not what one would call graceful. They were not designed to walk. They fly. And when they fly, oh, how they fly, so free, so graceful. They see from the sky what we never see.” – Unknown

User avatar
Sandy_W
Topic Assistant
Posts: 19118
Joined: Feb 22, 2018
Location: Arkansas

Re: Report Cams Down and Forum Errors

Post by Sandy_W » Wed Jul 04, 2018 7:27 am

7:25 am Delta 2. Again zoomer cams and embedded cams cycling on and off. These are screenshots of of my desktop what I just received during this offline cycle as all cams offline.
2018-07-04_9-23-22.jpg
2018-07-04_9-25-00.jpg
Screenshot of embedded cams.
2018-07-04_9-27-23.jpg
“Eagles: When they walk, they stumble. They are not what one would call graceful. They were not designed to walk. They fly. And when they fly, oh, how they fly, so free, so graceful. They see from the sky what we never see.” – Unknown

User avatar
IrishEyes
Forum Assistant
Posts: 47543
Joined: Feb 09, 2018
Location: Nova Scotia, Canada

Re: Report Cams Down and Forum Errors

Post by IrishEyes » Thu Jul 05, 2018 3:36 am

THURSDAY, JULY 4, 2018


Good early Morning in BC !

Re Harrison Mills

3:24am
Both embedded cams are down
screenshot_14.jpg
According to You Tube they went down 3 hours ago

The Direct Access zoomer cams are streaming

Thank You
Bev
Image

HELPFUL HINTS...Be Respectful !....Bev...member since 08/04/09

Cheryldavis
Topic Assistant
Posts: 4183
Joined: Feb 21, 2018
Location: England

Re: Report Cams Down and Forum Errors

Post by Cheryldavis » Thu Jul 05, 2018 7:55 am

7.45 am Delta time July 5th Cams are going and off and Zoomer cams are playing up too.
"If you hang out with chickens, you are going to cluck and if you hang out with eagles, you are going to fly! " Dr Steve Maraboli

User avatar
Yolande
Topic Assistant
Posts: 6651
Joined: Feb 22, 2018

Re: Report Cams Down and Forum Errors

Post by Yolande » Thu Jul 05, 2018 2:48 pm

The embedded cams are down at HM [off and on since this morning according to one of the posts there] - I don't seem to be able to bring up the PTZ cams either ... I am getting little spinning circles - no connection to the PTZs after 5 min.

Thanks!

User avatar
Yolande
Topic Assistant
Posts: 6651
Joined: Feb 22, 2018

Re: Report Cams Down and Forum Errors

Post by Yolande » Thu Jul 05, 2018 3:15 pm

All cams up at HM 3:14pm

Thanks...!

User avatar
Yolande
Topic Assistant
Posts: 6651
Joined: Feb 22, 2018

Re: Report Cams Down and Forum Errors

Post by Yolande » Thu Jul 05, 2018 8:33 pm

Hi again...the embedded cams at HM are down...so far, I haven't been able to connect with the PTZ cams either...

Thanks....

User avatar
Yolande
Topic Assistant
Posts: 6651
Joined: Feb 22, 2018

Re: Report Cams Down and Forum Errors

Post by Yolande » Thu Jul 05, 2018 8:48 pm

PTZs and embedded cams just up at HM

User avatar
Sandy_W
Topic Assistant
Posts: 19118
Joined: Feb 22, 2018
Location: Arkansas

Re: Report Cams Down and Forum Errors

Post by Sandy_W » Fri Jul 06, 2018 4:43 am

Delta 2 zoomer cams and embedded cams offline line this morning. 4:43 am. The cams are still crashing as of 6:56 am.
“Eagles: When they walk, they stumble. They are not what one would call graceful. They were not designed to walk. They fly. And when they fly, oh, how they fly, so free, so graceful. They see from the sky what we never see.” – Unknown

User avatar
jkr
Admin
Posts: 185
Joined: Jan 01, 2018
Location: East Kootenay, BC, Canada

Re: Report Cams Down and Forum Errors

Post by jkr » Fri Jul 06, 2018 7:38 am

I don't know if Ken has been notified but I have sent him a text to check Delta.
Judy (jkr) - member since 2006
Need Help ? Check our HELPFUL HINTS

User avatar
Yolande
Topic Assistant
Posts: 6651
Joined: Feb 22, 2018

Re: Report Cams Down and Forum Errors

Post by Yolande » Fri Jul 06, 2018 12:48 pm

Hi Judy....

Embedded cams have been down at HM for over an hour ......and I've been trying to get the N and S PTZs up for about 10min with no success...yet.

Thank-you......

User avatar
Yolande
Topic Assistant
Posts: 6651
Joined: Feb 22, 2018

Re: Report Cams Down and Forum Errors

Post by Yolande » Fri Jul 06, 2018 3:49 pm

All cams up at HM and thank-you!

User avatar
SueB
Zoomer
Posts: 23951
Joined: Feb 20, 2018
Location: SW Florida

Re: Report Cams Down and Forum Errors

Post by SueB » Sat Jul 07, 2018 4:35 pm

Good Afternoon All! All Delta 2 cams went down around 7 minutes ago and have not come back up.

4:36 pm - just came back up right after I posted this.

User avatar
Yolande
Topic Assistant
Posts: 6651
Joined: Feb 22, 2018

Re: Report Cams Down and Forum Errors

Post by Yolande » Sun Jul 08, 2018 11:22 am

Morning ... The embedded cams went down at HM five minutes ago...

Thanks!

ADD: 11:55am I just tried the PTZ cams and they aren't coming up for me either....

ADD: 2:27pm All cams still down at Harrison Mills

User avatar
IrishEyes
Forum Assistant
Posts: 47543
Joined: Feb 09, 2018
Location: Nova Scotia, Canada

Re: Report Cams Down and Forum Errors

Post by IrishEyes » Sun Jul 08, 2018 4:26 pm

Good Afternoon !

Re H Mills Cams

4:17.....I tried several times today to get the the cams......according to You Tube the last live stream was 5 hours ago

From You Tube

HWF-Harrmills-N
Last streamed live 5 hours ago

HWF-Harrmills-S
Last streamed live 5 hours ago

The Direct Access Zoomer Cams are down also.

Thank You

Bev
Image

HELPFUL HINTS...Be Respectful !....Bev...member since 08/04/09

User avatar
IrishEyes
Forum Assistant
Posts: 47543
Joined: Feb 09, 2018
Location: Nova Scotia, Canada

Re: Report Cams Down and Forum Errors

Post by IrishEyes » Sun Jul 08, 2018 6:33 pm

Re Harrison Mills


6:19pm.....Just to let you now It is 7 hrs . now and the embedded and direct access zoomer cams are still down at H Mills...

Thank You
Bev
Image

HELPFUL HINTS...Be Respectful !....Bev...member since 08/04/09

User avatar
IrishEyes
Forum Assistant
Posts: 47543
Joined: Feb 09, 2018
Location: Nova Scotia, Canada

Re: Report Cams Down and Forum Errors

Post by IrishEyes » Mon Jul 09, 2018 5:51 am

MONDAY, JULY 9 , 2018

Good Morning !

The H Mills cams are streaming as of 5:59am this morning ! :luck:
Image

HELPFUL HINTS...Be Respectful !....Bev...member since 08/04/09

User avatar
IrishEyes
Forum Assistant
Posts: 47543
Joined: Feb 09, 2018
Location: Nova Scotia, Canada

Re: Report Cams Down and Forum Errors

Post by IrishEyes » Mon Jul 09, 2018 2:12 pm

2:04pm

Re Harrison Mills

The H Mills and direct access zoomer cams are down for over 2 hours .. they were also down around 10:29 am. and came back on

It seems they are off longer than what they are streaming

Thanks
Bev
Image

HELPFUL HINTS...Be Respectful !....Bev...member since 08/04/09

User avatar
IrishEyes
Forum Assistant
Posts: 47543
Joined: Feb 09, 2018
Location: Nova Scotia, Canada

Re: Report Cams Down and Forum Errors

Post by IrishEyes » Mon Jul 09, 2018 3:58 pm

3:50pm
Hi again

H Mills cams just back :thumlft:
Image

HELPFUL HINTS...Be Respectful !....Bev...member since 08/04/09

User avatar
IrishEyes
Forum Assistant
Posts: 47543
Joined: Feb 09, 2018
Location: Nova Scotia, Canada

Re: Report Cams Down and Forum Errors

Post by IrishEyes » Mon Jul 09, 2018 4:51 pm

4:29pm
H Mills cams are down again
Image

HELPFUL HINTS...Be Respectful !....Bev...member since 08/04/09

User avatar
Yolande
Topic Assistant
Posts: 6651
Joined: Feb 22, 2018

Re: Report Cams Down and Forum Errors

Post by Yolande » Mon Jul 09, 2018 8:14 pm

The cams at HM were up from 8:00pm to 8:02pm. They are all down as of 8:14pm.

User avatar
IrishEyes
Forum Assistant
Posts: 47543
Joined: Feb 09, 2018
Location: Nova Scotia, Canada

Re: Report Cams Down and Forum Errors

Post by IrishEyes » Tue Jul 10, 2018 6:57 am

TUESDAY , JULY 10, 2018

Good Morning!

Re Harrison Mills.

5:39am....Cams are down 7 hours now !

6:28am ,Cams are steaming

6:31am.. Cams are down.... they were streaming 13mins .
Image

HELPFUL HINTS...Be Respectful !....Bev...member since 08/04/09

User avatar
Sandy_W
Topic Assistant
Posts: 19118
Joined: Feb 22, 2018
Location: Arkansas

Re: Report Cams Down and Forum Errors

Post by Sandy_W » Tue Jul 10, 2018 8:20 am

Delta 2 cams at 8:19 am are offline...both embedded and zoomer cams. As I am posting, they have been down 7 minutes give or take a minute.

The cams were down from 8:12 am approximately to 8:26 am. They came back on line but there is a very loud buzzing sound from both cams.
“Eagles: When they walk, they stumble. They are not what one would call graceful. They were not designed to walk. They fly. And when they fly, oh, how they fly, so free, so graceful. They see from the sky what we never see.” – Unknown

User avatar
Yolande
Topic Assistant
Posts: 6651
Joined: Feb 22, 2018

Re: Report Cams Down and Forum Errors

Post by Yolande » Tue Jul 10, 2018 1:49 pm

Harrison Mills cams are all off-line. [as of 12min ago]

User avatar
IrishEyes
Forum Assistant
Posts: 47543
Joined: Feb 09, 2018
Location: Nova Scotia, Canada

Re: Report Cams Down and Forum Errors

Post by IrishEyes » Tue Jul 10, 2018 3:03 pm

Re H M ills

2:55pm.....The embedded and direct access cams are all still down at H Mills!
Image

HELPFUL HINTS...Be Respectful !....Bev...member since 08/04/09

User avatar
JudyB
Admin
Posts: 4624
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Tue Jul 10, 2018 3:03 pm

2:58 pm
HM cams are still down. I just checked with Ken, and he has not made any progress getting a new modem there. He'll be seeing David Hancock tomorrow, and hopefully the two of them will be able to arrange for that to happen. I've tried logging in to the zoomer links a couple of times in the last hour or so, and haven't had any success.

I think the hum is gone at Delta 2 (though we have an air conditioner running here which might be masking the sound) - they acted as if they were rebooted not long ago, so perhaps Ken did that and it helped. I didn't think to ask if he'd rebooted recently when I was talking with him.

Post Reply

Return to “Technical Help”