Page 87 of 383
Re: Report Cams Down and Forum Errors
Posted: Tue Aug 13, 2019 11:10 am
by DDuckies2
11am I rebooted WR NORTH ,which did not help.
Still off line.
Lynne wrote: ↑Tue Aug 13, 2019 9:39 am
Good Morning, Tuesday August 13th
North cam at WR has not been streaming for several hours. Reboot? or other problem?
Thanks for any help
Re: Report Cams Down and Forum Errors
Posted: Tue Aug 13, 2019 2:26 pm
by JudyB
DDuckies2 wrote: ↑Tue Aug 13, 2019 11:10 am
11am I rebooted WR NORTH ,which did not help.
Still off line.
Lynne wrote: ↑Tue Aug 13, 2019 9:39 am
Good Morning, Tuesday August 13th
North cam at WR has not been streaming for several hours. Reboot? or other problem?
Thanks for any help
2:24 pm
Thanks, Lynne and DDuckies! I took a look at the cam using the zoomer link and all looks fine there, and checked the YouTube page and it's not getting the signal, so I sent a message to Ken asking him if he could check the Wowza.
3:08 pm update
Just heard back from Ken, and the North cam is streaming.
Re: Report Cams Down and Forum Errors
Posted: Wed Aug 14, 2019 8:09 am
by gemini
8:08 am The SR North cam has a spinning circle. Since you already rebooted Judy, I won't try it now.
Re: Report Cams Down and Forum Errors
Posted: Sun Aug 18, 2019 5:29 pm
by IrishEyes
SUNDAY , AUGUST 18, 2019
5:07p pm nest time
Re Harrison Mills N Embedded Cam
Hi Judy .. I know it is late where you live
N Embedded Cam is sputtering..crackling sound since earlier today .. the time on it is correct... it is windy at H Mills and maybe that is what is affecting the Mic on the N Cam or loose connection
... wondering if a reboot will help ... what do you think? and no rush .. thought I should let you know ..
Thanks
Bev.
Re: Report Cams Down and Forum Errors
Posted: Mon Aug 19, 2019 5:51 am
by IrishEyes
Monday , August 19 , 2019
Good Morning Judy ..
R
e Harrison Mills
N embedded cam is down
I checked the N Direct Access Zoomer Cam and that is streaming ..
Thanks
Bev
Re: Report Cams Down and Forum Errors
Posted: Mon Aug 19, 2019 10:43 am
by JudyB
Done, and the cam is streaming. Sorry for the delay.
Re: Report Cams Down and Forum Errors
Posted: Mon Aug 19, 2019 10:55 am
by IrishEyes
JudyB wrote: ↑Mon Aug 19, 2019 10:43 am
Done, and the cam is streaming. Sorry for the delay.
Thanks Judy and all is good ,
Re: Report Cams Down and Forum Errors
Posted: Thu Aug 22, 2019 10:02 am
by Jean
10:00am...........Judy, just letting you know that the embedded cams at Delta2 were off for about 4 hours last night............from just after midnight to just after 4am. When I've been on the cams a few times I'm still noticing lots of spinning circles happening.
All cams seem to fine at the moment.
Re: Report Cams Down and Forum Errors
Posted: Fri Aug 30, 2019 2:44 pm
by SueD
Friday, Aug. 30, 2019: The Chehalis River Fish Hatchery cam seems to have frozen as of 10:45 a.m. today. Streaming resumed at about 1:14 p.m., but then froze up again.
Re: Report Cams Down and Forum Errors
Posted: Fri Aug 30, 2019 3:23 pm
by JudyB
SueD wrote: ↑Fri Aug 30, 2019 2:44 pm
Friday, Aug. 30, 2019: The Chehalis River Fish Hatchery cam seems to have frozen as of
10:45 a.m. today. Streaming resumed at about
1:14 p.m., but then froze up again.
Thanks, Sue. I think they folks at the hatchery are planning to do some work on the cam on Wednesday, moving it a little nearer the channel and pointing it down a bit more. I noticed it was stalled when I checked it - but I had several cams open so thought it might be me.
And I just went to check - and all our embedded cams are down and have been for 24 minutes. I'll contact Ken.
Re: Report Cams Down and Forum Errors
Posted: Wed Sep 04, 2019 3:01 pm
by IrishEyes
Good Afternoon
4:58p
N embeeded Cam is down
N Direct Access Cam is streaming
Thanks
Bev
Re: Report Cams Down and Forum Errors
Posted: Wed Sep 04, 2019 3:12 pm
by IrishEyes
JudyB wrote: ↑Wed Sep 04, 2019 3:03 pm
IrishEyes wrote: ↑Wed Sep 04, 2019 3:01 pm
Good Afternoon
4:58p
N embeeded Cam is down
N Direct Access Cam is streaming
Thanks
Bev
Thanks, Bev - I'll take a look.
The Surrey South embedded cam just came back; the Surrey North embedded is still down - haven't checked the direct link yet.
Added -
It took a while for me to log into Harrison North, but I finally got the control stream and did a reboot, and still cannot connect. I'll send a message to Ken as soon as I finish checking out Surrey North.
Thanks Judy .. I sent an e-mail to you and Ken rw H Mills~
Re: Report Cams Down and Forum Errors
Posted: Wed Sep 04, 2019 3:15 pm
by IrishEyes
3:13p
S Embeeded cam is sputtering
Re: Report Cams Down and Forum Errors
Posted: Wed Sep 04, 2019 3:51 pm
by IrishEyes
JudyB wrote: ↑Wed Sep 04, 2019 3:38 pm
IrishEyes wrote: ↑Wed Sep 04, 2019 3:15 pm
3:13p
S Embeeded cam is sputtering
I just logged into Harrison South, and the clock was freezing briefly every few seconds, suggesting to me that there's an issue with the internet, not with the cam, so I didn't try a reboot. I'll send an email to Ken, though I'm not sure if there's anything he can do - if we're not getting a stable signal from the cam when we're logged in, the WOWZA server can't get one either. Hopefully things will clear up before too long.
Thanks so much Judy
Re: Report Cams Down and Forum Errors
Posted: Wed Sep 04, 2019 6:02 pm
by IrishEyes
5:55p Nest Time
Both embedded cams are streaming at H Mills
Thank you Ken and Judy!
