Page 85 of 379

Re: Report Cams Down and Forum Errors

Posted: Tue Jul 16, 2019 12:40 pm
by IrishEyes
JudyB wrote:
Tue Jul 16, 2019 12:36 pm
I’ve sent a text to Ken. Should be home and back online in about an hour.


Thanks Judy!

Re: Report Cams Down and Forum Errors

Posted: Tue Jul 16, 2019 12:49 pm
by JudyB
There are power outages in the Vancouver area - not sure where Ken lives but the Wowza server could be down.

Re: Report Cams Down and Forum Errors

Posted: Tue Jul 16, 2019 1:07 pm
by JudyB
Ken says Wowza is streaming - so if embedded cams are still down, it could be a YouTube issue. I’ll be home soon and will check then.

Re: Report Cams Down and Forum Errors

Posted: Tue Jul 16, 2019 1:07 pm
by IrishEyes
JudyB wrote:
Tue Jul 16, 2019 12:49 pm
There are power outages in the Vancouver area - not sure where Ken lives but the Wowza server could be down.
1:05p

The H Mills cams are back Judy !
screenshot_28.jpg

Re: Report Cams Down and Forum Errors

Posted: Tue Jul 16, 2019 1:42 pm
by JudyB
Thanks, Bev! The other embedded cams are also all streaming now.

Re: Report Cams Down and Forum Errors

Posted: Sun Jul 21, 2019 6:05 pm
by Darlene
The Delta2 cams are down, embedded cams also.

Re: Report Cams Down and Forum Errors

Posted: Sun Jul 21, 2019 10:06 pm
by Darlene
Delta2 cams have been down all evening.

Re: Report Cams Down and Forum Errors

Posted: Mon Jul 22, 2019 2:55 am
by Sandy_W
2:54 am Delta 2 embedded cams are still down and think have been down since last evening around 5:30 pm.

Re: Report Cams Down and Forum Errors

Posted: Mon Jul 22, 2019 5:29 am
by JudyB
Sandy_W wrote:
Mon Jul 22, 2019 2:55 am
2:54 am Delta 2 embedded cams are still down and think have been down since last evening around 5:30 pm.
Thanks, Darlene and Sandy. I also can't reach the cams with the zoomer links, and the embedded cams are down. I've sent a message to Ken, though it is very early in BC so he may not see it for a while.

Re: Report Cams Down and Forum Errors

Posted: Tue Jul 23, 2019 7:34 am
by Darlene
Cams ares till down at Delta2! :bashcomp:

Not a good time for them to go down when these could be the last days of the juvies hanging around.

Re: Report Cams Down and Forum Errors

Posted: Tue Jul 23, 2019 7:58 am
by JudyB
Darlene wrote:
Tue Jul 23, 2019 7:34 am
Cams ares till down at Delta2! :bashcomp:

Not a good time for them to go down when these could be the last days of the juvies hanging around.
I've sent an email to Ken - not near my phone, but I'll also send a text if I haven't heard from him soon.

Re: Report Cams Down and Forum Errors

Posted: Wed Jul 24, 2019 1:25 pm
by Lynne
White Rock North cam needs a reboot (Zoomers are away for now)
Thank you!

Re: Report Cams Down and Forum Errors

Posted: Wed Jul 24, 2019 3:04 pm
by JudyB
Lynne wrote:
Wed Jul 24, 2019 1:25 pm
White Rock North cam needs a reboot (Zoomers are away for now)
Thank you!
Done!

Re: Report Cams Down and Forum Errors

Posted: Sat Jul 27, 2019 3:15 pm
by DDuckies2
WHITE ROCK NORTH<
last evening and today while zooming with N it stalls, sometimes turns white, works for a few minutes at first then starts acting up.
Rebooting has not helped.
Note again it works for awhile then freezes and nothing works including the presets.
This is different then what we often have happen when using a preset seems to unlock the freeze.
once it went into panning all by itself :dunno:

Re: Report Cams Down and Forum Errors

Posted: Sat Jul 27, 2019 3:25 pm
by JudyB
DDuckies2 wrote:
Sat Jul 27, 2019 3:15 pm
WHITE ROCK NORTH<
last evening and today while zooming with N it stalls, sometimes turns white, works for a few minutes at first then starts acting up.
Rebooting has not helped.
Note again it works for awhile then freezes and nothing works including the presets.
This is different then what we often have happen when using a preset seems to unlock the freeze.
once it went into panning all by itself :dunno:
That's different.... And unfortunately I haven't a clue as to what to suggest, other than sending your comments to Ken to see if he has any thoughts.

Were you using or watching the other cams on site while this was happening? I'm wondering if it could be the modem, or if we need a second line there. If the other cams were behaving, it's more likely to be an issue with the cam or its cabling.