Report Cams Down and Forum Errors

Report cams up/down or if you need technical assistance.
User avatar
SueB
Zoomer
Posts: 47540
Joined: Feb 20, 2018
Location: SW Florida

Re: Report Cams Down and Forum Errors

Post by SueB » Wed Jul 14, 2021 6:03 pm

Jean wrote:
Wed Jul 14, 2021 5:06 pm
5:05pm........The EAST embedded cam at Delta2 just went black.
Adding to Jean's post....now both Delta embedded cams are down. The W Cam went down at 5:21 pm

User avatar
JudyB
Admin
Posts: 17998
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Wed Jul 14, 2021 7:20 pm

SueB wrote:
Wed Jul 14, 2021 6:03 pm
Jean wrote:
Wed Jul 14, 2021 5:06 pm
5:05pm........The EAST embedded cam at Delta2 just went black.
Adding to Jean's post....now both Delta embedded cams are down. The W Cam went down at 5:21 pm
Thanks for reporting them, Sue - it looks like Ken got the message, because they are back now.

User avatar
IrishEyes
Forum Assistant
Posts: 120412
Joined: Feb 09, 2018
Location: Nova Scotia, Canada

Re: Report Cams Down and Forum Errors

Post by IrishEyes » Fri Jul 16, 2021 7:15 am

FRIDAY JULY 16, 2021

Good Morning Judy !

Re H Mills N Embedded Cam.It is stuck at 4:20am ... The N PTZ cam is streaming .... and we are waiting for a miracle on the S Cam .. :luck:

Thanks
Bev
Image

HELPFUL HINTS.......Bev...member since 08/04/09

User avatar
JudyB
Admin
Posts: 17998
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Fri Jul 16, 2021 7:27 am

IrishEyes wrote:
Fri Jul 16, 2021 7:15 am
FRIDAY JULY 16, 2021

Good Morning Judy !

Re H Mills N Embedded Cam.It is stuck at 4:20am ... The N PTZ cam is streaming .... and we are waiting for a miracle on the S Cam .. :luck:

Thanks
Bev
Thanks, Bev - I've sent a message to Ken.

User avatar
IrishEyes
Forum Assistant
Posts: 120412
Joined: Feb 09, 2018
Location: Nova Scotia, Canada

Re: Report Cams Down and Forum Errors

Post by IrishEyes » Fri Jul 16, 2021 7:33 am

JudyB wrote:
Fri Jul 16, 2021 7:27 am
IrishEyes wrote:
Fri Jul 16, 2021 7:15 am
FRIDAY JULY 16, 2021

Good Morning Judy !

Re H Mills N Embedded Cam.It is stuck at 4:20am ... The N PTZ cam is streaming .... and we are waiting for a miracle on the S Cam .. :luck:

Thanks
Bev
Thanks, Bev - I've sent a message to Ken.
Thanks Judy -
Image

HELPFUL HINTS.......Bev...member since 08/04/09

User avatar
IrishEyes
Forum Assistant
Posts: 120412
Joined: Feb 09, 2018
Location: Nova Scotia, Canada

Re: Report Cams Down and Forum Errors

Post by IrishEyes » Fri Jul 16, 2021 1:28 pm

HI Judy -
No rush for this .. I don't have sound on the H Mills Cam .
Thank you
Bev
Image

HELPFUL HINTS.......Bev...member since 08/04/09

User avatar
Philjo56France
Posts: 53132
Joined: Feb 23, 2018
Location: France

Re: Report Cams Down and Forum Errors

Post by Philjo56France » Sat Jul 17, 2021 1:00 am

Hi Judy,
At Delta2

West cam stopped as it is noted at 01h13.58 and (it stopped 15' ago)

In fact it is not yet 01h00 but is around 00h58 local time now (confirmed by my web timer)

:bye 1:


at 04h24 Normal time West cam is running ok
East cam is back running but the timer is at 03h49 around 24 minute later than normal
2021-07-17_13h25_16.jpg
:rh: E9: 7 yo / E14 :rh:
One day in the wild is worth a lifetime in a cage. B.Shofstall
RIP 2017 to 2023-2024

User avatar
JudyB
Admin
Posts: 17998
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Sat Jul 17, 2021 5:35 am

Philjo56France wrote:
Sat Jul 17, 2021 1:00 am
Hi Judy,
At Delta2

West cam stopped as it is noted at 01h13.58 and (it stopped 15' ago)

In fact it is not yet 01h00 but is around 00h58 local time now (confirmed by my web timer)

:bye 1:


at 04h24 Normal time West cam is running ok
East cam is back running but the timer is at 03h49 around 24 minute later than normal2021-07-17_13h25_16.jpg

5:32 am
Having trouble moving around the forum this morning - I'll check again in a few minutes and report it if it isn't better.


Thanks for your report, Philjo.

Delta West embedded seems to be streaming now, but it's about 35 minutes behind. It's not the time stamp that's off - the darkness at the nest compared with what I saw when I logged into the cam directly makes it look as if it's taking a very long time for the signal to get from the cam to YouTube.

I've sent a message to Ken, but it's still very early in BC, so he may not get it for a while.

User avatar
IrishEyes
Forum Assistant
Posts: 120412
Joined: Feb 09, 2018
Location: Nova Scotia, Canada

Re: Report Cams Down and Forum Errors

Post by IrishEyes » Sat Jul 17, 2021 8:53 am

JudyB wrote:
Sat Jul 17, 2021 5:35 am
Philjo56France wrote:
Sat Jul 17, 2021 1:00 am
Hi Judy,
At Delta2

West cam stopped as it is noted at 01h13.58 and (it stopped 15' ago)

In fact it is not yet 01h00 but is around 00h58 local time now (confirmed by my web timer)

:bye 1:


at 04h24 Normal time West cam is running ok
East cam is back running but the timer is at 03h49 around 24 minute later than normal2021-07-17_13h25_16.jpg

5:32 am
Having trouble moving around the forum this morning - I'll check again in a few minutes and report it if it isn't better.


Thanks for your report, Philjo.

Delta West embedded seems to be streaming now, but it's about 35 minutes behind. It's not the time stamp that's off - the darkness at the nest compared with what I saw when I logged into the cam directly makes it look as if it's taking a very long time for the signal to get from the cam to YouTube.

I've sent a message to Ken, but it's still very early in BC, so he may not get it for a while.
Thanks Judy... N Cam at H Mills doesn't have sound.
TY Bev
Image

HELPFUL HINTS.......Bev...member since 08/04/09

User avatar
JudyB
Admin
Posts: 17998
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Sat Jul 17, 2021 9:19 am

IrishEyes wrote:
Sat Jul 17, 2021 8:53 am


Thanks Judy... N Cam at H Mills doesn't have sound.
TY Bev
I'm not hearing anything by a hum and clicking, but I'm hearing that loud and clear. Maybe Ken has reset something.

User avatar
IrishEyes
Forum Assistant
Posts: 120412
Joined: Feb 09, 2018
Location: Nova Scotia, Canada

Re: Report Cams Down and Forum Errors

Post by IrishEyes » Sat Jul 17, 2021 9:33 am

JudyB wrote:
Sat Jul 17, 2021 9:19 am
IrishEyes wrote:
Sat Jul 17, 2021 8:53 am


Thanks Judy... N Cam at H Mills doesn't have sound.
TY Bev
I'm not hearing anything by a hum and clicking, but I'm hearing that loud and clear. Maybe Ken has reset something.
\Thanks Judy ...... I also have sound........ hope you get sone rest today .. it seems to me you are doing a lot all over this forum and at SR... Please take some time for YOU :hug:
Image

HELPFUL HINTS.......Bev...member since 08/04/09

User avatar
JudyB
Admin
Posts: 17998
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Sat Jul 17, 2021 10:14 am

IrishEyes wrote:
Sat Jul 17, 2021 9:33 am
JudyB wrote:
Sat Jul 17, 2021 9:19 am
IrishEyes wrote:
Sat Jul 17, 2021 8:53 am


Thanks Judy... N Cam at H Mills doesn't have sound.
TY Bev
I'm not hearing anything by a hum and clicking, but I'm hearing that loud and clear. Maybe Ken has reset something.
\Thanks Judy ...... I also have sound........ hope you get sone rest today .. it seems to me you are doing a lot all over this forum and at SR... Please take some time for YOU :hug:
Not sure if it's rest - but I'll be out most of the afternoon and evening doing sound for a show Charlie's group is doing - so if you see camera issues, please feel free to email Ken. Thanks!

User avatar
IrishEyes
Forum Assistant
Posts: 120412
Joined: Feb 09, 2018
Location: Nova Scotia, Canada

Re: Report Cams Down and Forum Errors

Post by IrishEyes » Sat Jul 17, 2021 12:11 pm

JudyB wrote:
Sat Jul 17, 2021 10:14 am
IrishEyes wrote:
Sat Jul 17, 2021 9:33 am
JudyB wrote:
Sat Jul 17, 2021 9:19 am


I'm not hearing anything by a hum and clicking, but I'm hearing that loud and clear. Maybe Ken has reset something.
\Thanks Judy ...... I also have sound........ hope you get sone rest today .. it seems to me you are doing a lot all over this forum and at SR... Please take some time for YOU :hug:
Not sure if it's rest - but I'll be out most of the afternoon and evening doing sound for a show Charlie's group is doing - so if you see camera issues, please feel free to email Ken. Thanks!
Enjoy Judy ..they say a change is as good as a rest :D I will be happy to do that :hug:
Image

HELPFUL HINTS.......Bev...member since 08/04/09

User avatar
IrishEyes
Forum Assistant
Posts: 120412
Joined: Feb 09, 2018
Location: Nova Scotia, Canada

Re: Report Cams Down and Forum Errors

Post by IrishEyes » Sat Jul 17, 2021 2:31 pm

2:26pm nest time.. just checking here before I start dinner....... happy all is good :)

ETA .4:24pm Nest time .....No news is good news :)

6:05pm Nest Time ..Same as above.

It is late for me .

Hope you Had a good day Judy :hug:
Image

HELPFUL HINTS.......Bev...member since 08/04/09

User avatar
JudyB
Admin
Posts: 17998
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Sat Jul 17, 2021 7:56 pm

IrishEyes wrote:
Sat Jul 17, 2021 2:31 pm

Hope you Had a good day Judy :hug:
Thanks, Bev - it was great! :)

Post Reply

Return to “Technical Help”