Report Cams Down and Forum Errors

Report cams up/down or if you need technical assistance.
User avatar
Sandy_W
Topic Assistant
Posts: 56659
Joined: Feb 22, 2018
Location: Arkansas

Re: Report Cams Down and Forum Errors

Post by Sandy_W » Tue Jul 03, 2018 1:42 pm

Delta 2 zoomer cams and embedded cams both offline at 1:39 pm. Having issues with both cams stalling and stuttering while zooming as well.

Edit: still having online issues with the cams for zoomer and embedded cams going off line. 3:13 pm offline. The zoomer cams and the embedded cams will not stay online. Come on for about say..a minute then offline again. It is back and forth and making almost impossible to use the zoomer cams as they freeze in the middle of zooming.
“Eagles: When they walk, they stumble. They are not what one would call graceful. They were not designed to walk. They fly. And when they fly, oh, how they fly, so free, so graceful. They see from the sky what we never see.” – Unknown

User avatar
Sandy_W
Topic Assistant
Posts: 56659
Joined: Feb 22, 2018
Location: Arkansas

Re: Report Cams Down and Forum Errors

Post by Sandy_W » Tue Jul 03, 2018 5:50 pm

5:36 pm Delta 2 zoomer cam and embedded cams went down again. JudyB rebooted around 3:52 pm and worked fine until 4:33 pm when they began going down again. Since this time, they have gone offline six time for approximately 5 minutes down to less than a minute. As I post this is time, they have been offline for 15 minutes.
“Eagles: When they walk, they stumble. They are not what one would call graceful. They were not designed to walk. They fly. And when they fly, oh, how they fly, so free, so graceful. They see from the sky what we never see.” – Unknown

User avatar
Jean
Topic Assistant
Posts: 38447
Joined: Feb 19, 2018
Location: Langley, BC

Re: Report Cams Down and Forum Errors

Post by Jean » Tue Jul 03, 2018 9:46 pm

9:45pm........Just to add to the above posts..........I was on the zoomer cams at Delta for about 4-30 minutes...........cams went down at least twice.
"Volunteers do not necessarily have the time..............they have the heart"..........Elizabeth Andrew

(Member since 9/10/11)

User avatar
Sandy_W
Topic Assistant
Posts: 56659
Joined: Feb 22, 2018
Location: Arkansas

Re: Report Cams Down and Forum Errors

Post by Sandy_W » Wed Jul 04, 2018 5:58 am

Delta 2 cams: July 4, 2018, Last night the embedded cams were off and on. And this morning, zoomer cams and embedded cams are cycling on and off, freezing and then coming back. Lost count the number of times since 4:08 the times this has happened when zoomer began zooming.
“Eagles: When they walk, they stumble. They are not what one would call graceful. They were not designed to walk. They fly. And when they fly, oh, how they fly, so free, so graceful. They see from the sky what we never see.” – Unknown

User avatar
Sandy_W
Topic Assistant
Posts: 56659
Joined: Feb 22, 2018
Location: Arkansas

Re: Report Cams Down and Forum Errors

Post by Sandy_W » Wed Jul 04, 2018 7:27 am

7:25 am Delta 2. Again zoomer cams and embedded cams cycling on and off. These are screenshots of of my desktop what I just received during this offline cycle as all cams offline.
2018-07-04_9-23-22.jpg
2018-07-04_9-25-00.jpg
Screenshot of embedded cams.
2018-07-04_9-27-23.jpg
“Eagles: When they walk, they stumble. They are not what one would call graceful. They were not designed to walk. They fly. And when they fly, oh, how they fly, so free, so graceful. They see from the sky what we never see.” – Unknown

User avatar
IrishEyes
Forum Assistant
Posts: 120408
Joined: Feb 09, 2018
Location: Nova Scotia, Canada

Re: Report Cams Down and Forum Errors

Post by IrishEyes » Thu Jul 05, 2018 3:36 am

THURSDAY, JULY 4, 2018


Good early Morning in BC !

Re Harrison Mills

3:24am
Both embedded cams are down
screenshot_14.jpg
According to You Tube they went down 3 hours ago

The Direct Access zoomer cams are streaming

Thank You
Bev
Image

HELPFUL HINTS.......Bev...member since 08/04/09

Jetsetterdavis
Posts: 4305
Joined: Feb 21, 2018
Location: England

Re: Report Cams Down and Forum Errors

Post by Jetsetterdavis » Thu Jul 05, 2018 7:55 am

7.45 am Delta time July 5th Cams are going and off and Zoomer cams are playing up too.
"If you hang out with chickens, you are going to cluck and if you hang out with eagles, you are going to fly! " Dr Steve Maraboli

User avatar
Yolande
Topic Assistant
Posts: 9546
Joined: Feb 22, 2018

Re: Report Cams Down and Forum Errors

Post by Yolande » Thu Jul 05, 2018 2:48 pm

The embedded cams are down at HM [off and on since this morning according to one of the posts there] - I don't seem to be able to bring up the PTZ cams either ... I am getting little spinning circles - no connection to the PTZs after 5 min.

Thanks!

User avatar
Yolande
Topic Assistant
Posts: 9546
Joined: Feb 22, 2018

Re: Report Cams Down and Forum Errors

Post by Yolande » Thu Jul 05, 2018 3:15 pm

All cams up at HM 3:14pm

Thanks...!

User avatar
Yolande
Topic Assistant
Posts: 9546
Joined: Feb 22, 2018

Re: Report Cams Down and Forum Errors

Post by Yolande » Thu Jul 05, 2018 8:33 pm

Hi again...the embedded cams at HM are down...so far, I haven't been able to connect with the PTZ cams either...

Thanks....

User avatar
Yolande
Topic Assistant
Posts: 9546
Joined: Feb 22, 2018

Re: Report Cams Down and Forum Errors

Post by Yolande » Thu Jul 05, 2018 8:48 pm

PTZs and embedded cams just up at HM

User avatar
Sandy_W
Topic Assistant
Posts: 56659
Joined: Feb 22, 2018
Location: Arkansas

Re: Report Cams Down and Forum Errors

Post by Sandy_W » Fri Jul 06, 2018 4:43 am

Delta 2 zoomer cams and embedded cams offline line this morning. 4:43 am. The cams are still crashing as of 6:56 am.
“Eagles: When they walk, they stumble. They are not what one would call graceful. They were not designed to walk. They fly. And when they fly, oh, how they fly, so free, so graceful. They see from the sky what we never see.” – Unknown

User avatar
jkr
Admin
Posts: 186
Joined: Jan 01, 2018
Location: East Kootenay, BC, Canada

Re: Report Cams Down and Forum Errors

Post by jkr » Fri Jul 06, 2018 7:38 am

I don't know if Ken has been notified but I have sent him a text to check Delta.
Judy (jkr) - member since 2006
Need Help ? Check our HELPFUL HINTS

User avatar
Yolande
Topic Assistant
Posts: 9546
Joined: Feb 22, 2018

Re: Report Cams Down and Forum Errors

Post by Yolande » Fri Jul 06, 2018 12:48 pm

Hi Judy....

Embedded cams have been down at HM for over an hour ......and I've been trying to get the N and S PTZs up for about 10min with no success...yet.

Thank-you......

User avatar
Yolande
Topic Assistant
Posts: 9546
Joined: Feb 22, 2018

Re: Report Cams Down and Forum Errors

Post by Yolande » Fri Jul 06, 2018 3:49 pm

All cams up at HM and thank-you!

Post Reply

Return to “Technical Help”