Report Cams Down and Forum Errors

Report cams up/down or if you need technical assistance.
User avatar
JudyB
Admin
Posts: 17990
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Sun May 27, 2018 6:39 pm

Thanks, Yolande and SueB!

I'll start by trying to reboot the South cam at Harrison Mills. Then I'll take a look at the Delta cams.

Added -

The reboot worked and HM South is live and streaming at the current time again.

The Delta cams are streaming with the correct time, and I'm reluctant to try rebooting them - will take a look in the early morning when less people are likely to be watching.

User avatar
IrishEyes
Forum Assistant
Posts: 120402
Joined: Feb 09, 2018
Location: Nova Scotia, Canada

Re: Report Cams Down and Forum Errors

Post by IrishEyes » Mon May 28, 2018 5:29 am

MONDAY, MAY 28, 2018

Good Morning !

Re Harrison Mills......

The N embedded Cam is down ... spinning circle and time is on 11:06pm May 27 .. so maybe that was when it went down ..I can connect to the NPTZ Cam

Thank you !
Image

HELPFUL HINTS.......Bev...member since 08/04/09

User avatar
JudyB
Admin
Posts: 17990
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Mon May 28, 2018 6:00 am

5:59 am
I am still signed into the North cam on my laptop as part of our plan to always have at least one person signed in. I'm going to try the reboot on my desktop - which should be just a little blip for the laptop.

6:03 am
It worked - North embedded cam is streaming again.

User avatar
IrishEyes
Forum Assistant
Posts: 120402
Joined: Feb 09, 2018
Location: Nova Scotia, Canada

Re: Report Cams Down and Forum Errors

Post by IrishEyes » Mon May 28, 2018 6:48 am

JudyB wrote:
Mon May 28, 2018 6:00 am
5:59 am
I am still signed into the North cam on my laptop as part of our plan to always have at least one person signed in. I'm going to try the reboot on my desktop - which should be just a little blip for the laptop.

6:03 am
It worked - North embedded cam is streaming again.
Thanks Judy !
Image

HELPFUL HINTS.......Bev...member since 08/04/09

User avatar
SueB
Zoomer
Posts: 47531
Joined: Feb 20, 2018
Location: SW Florida

Re: Report Cams Down and Forum Errors

Post by SueB » Tue May 29, 2018 8:24 am

8:20 am - Delta 2 Cams - Good Morning! All cams keep going off and on. I was just on the zoomer cams (since 7:00 am) and after about an hour they started hesitating and then going off and on. Very high winds there this morning so not sure if that has anything to do with it. Both cams are on the nest and I am now logged off them.

8:27 am - Seems that the embedded cams have been down since 8:17 am. At least that is the last time I see on the YT screen, although it's showing them down for only 5 minutes.....more like 10 minutes now.

User avatar
JudyB
Admin
Posts: 17990
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Tue May 29, 2018 8:53 am

8:51 am
I gave it a quick try and couldn't connect with East, and got partway into West, but was worried about continuing as it was taking so long. I'll send an email to Ken to let him know as he has more things to try. And West embedded cam just came back up, though it's very choppy.

User avatar
JudyB
Admin
Posts: 17990
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Tue May 29, 2018 9:05 am

9:00 am
David Hathaway reported that he's moving the HWF website to a different hosting provider (sort of like moving it to another server or hard drive). I'm not sure if the forum is part of that, but the cam pages may go down briefly as they're switched over. (Or not - he's very good at this - but he and I wanted to let people know it might happen.)

User avatar
JudyB
Admin
Posts: 17990
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Wed May 30, 2018 6:56 am

6:56 am
South embedded cam at Harrison Mills has a spinning circle - I'm going to see if I can reboot it.

7:00 am - done, and embedded cam is streaming again

User avatar
Jean
Topic Assistant
Posts: 38441
Joined: Feb 19, 2018
Location: Langley, BC

Re: Report Cams Down and Forum Errors

Post by Jean » Wed May 30, 2018 9:54 am

9:52am............The cams are continuing to go off and on at Delta2 (yesterday....several times). Last night I did not even try to log in as when I got there the cams went down as they have been doing yesterday and for several days now. I see the rollback was checked overnight and they were down then too at 3:40am.

I have not checked yet today, will give it a try now to see how the cams do, but just thought I should let you all know this problem is still occurring.

10:51am............ADDED: I was on zoomer cams for about an hour. They were fine but when I checked the rollback upon getting there, it only went back a few minutes so I am guessing the cams were still going off and on before then.
"Volunteers do not necessarily have the time..............they have the heart"..........Elizabeth Andrew

(Member since 9/10/11)

User avatar
Jean
Topic Assistant
Posts: 38441
Joined: Feb 19, 2018
Location: Langley, BC

Re: Report Cams Down and Forum Errors

Post by Jean » Wed May 30, 2018 2:14 pm

2:13pm...........All cams at Delta2 have continued to go off and on all day. They usually go off for only a second or two, then come back but can go off again right away or else they are fine for some time.
"Volunteers do not necessarily have the time..............they have the heart"..........Elizabeth Andrew

(Member since 9/10/11)

User avatar
Jean
Topic Assistant
Posts: 38441
Joined: Feb 19, 2018
Location: Langley, BC

Re: Report Cams Down and Forum Errors

Post by Jean » Thu May 31, 2018 1:24 pm

1:23pm...........Is there any word yet on why the cams are going on and off at Delta2?
"Volunteers do not necessarily have the time..............they have the heart"..........Elizabeth Andrew

(Member since 9/10/11)

User avatar
IrishEyes
Forum Assistant
Posts: 120402
Joined: Feb 09, 2018
Location: Nova Scotia, Canada

Re: Report Cams Down and Forum Errors

Post by IrishEyes » Thu May 31, 2018 1:55 pm

Good Afternoon .


1:56pm Re H Mills S cam

It has spinning circle and time is incorrect at 1:03pm

Thank You
'Bev
Image

HELPFUL HINTS.......Bev...member since 08/04/09

User avatar
JudyB
Admin
Posts: 17990
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Thu May 31, 2018 3:28 pm

IrishEyes wrote:
Thu May 31, 2018 1:55 pm
Good Afternoon .


1:56pm Re H Mills S cam

It has spinning circle and time is incorrect at 1:03pm

Thank You
'Bev
3:27 pm
Thanks, Bev! I just got home, and see that time is still off, so I'll see if I can reboot the South cam.

User avatar
IrishEyes
Forum Assistant
Posts: 120402
Joined: Feb 09, 2018
Location: Nova Scotia, Canada

Re: Report Cams Down and Forum Errors

Post by IrishEyes » Thu May 31, 2018 4:02 pm

JudyB wrote:
Thu May 31, 2018 3:28 pm
IrishEyes wrote:
Thu May 31, 2018 1:55 pm
Good Afternoon .


1:56pm Re H Mills S cam

It has spinning circle and time is incorrect at 1:03pm

Thank You
'Bev
3:27 pm
Thanks, Bev! I just got home, and see that time is still off, so I'll see if I can reboot the South cam.

Thanks Judy It is working now ! :hug:
Image

HELPFUL HINTS.......Bev...member since 08/04/09

User avatar
SueB
Zoomer
Posts: 47531
Joined: Feb 20, 2018
Location: SW Florida

Re: Report Cams Down and Forum Errors

Post by SueB » Fri Jun 01, 2018 6:45 am

Good Morning Everyone! Seems like the Delta 2 East Cam (embedded cam) is having the same problem that HM had yesterday. It has the spinning circle and an incorrect time on it (says 5:58 am when it's actually 6:44 am). I haven't been on the zoomer cams but Sandy_W Was earlier and mentioned that the E Cam was stuttering.

Have a great day everyone!

Post Reply

Return to “Technical Help”