Report Cams Down and Forum Errors

Report cams up/down or if you need technical assistance.
User avatar
Yolande
Topic Assistant
Posts: 9546
Joined: Feb 22, 2018

Re: Report Cams Down and Forum Errors

Post by Yolande » Tue Jun 26, 2018 12:21 pm

Hi again...the North embedded cam at Harrison Mills is also down...

ADD: South embedded cam at HM is down too..

Thanks!

User avatar
JudyB
Admin
Posts: 17961
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Tue Jun 26, 2018 1:17 pm

I've heard from Ken. There's an issue with the Wowza server, which I believe sends the signals to YouTube. He's not able to contact it directly, so is getting in touch with someone at the facility where the server is housed to see if they can reboot it manually.

He said that it may take a while to get it working correctly and all the streams going where they should go.

It should be fine for zoomers to be logged in and posting images using the direct access links - though it's possible you'll see the cams reboot once he's starting to get things streaming again.

User avatar
Darlene
Admin
Posts: 1728
Joined: Jan 15, 2018
Location: Langley

Re: Report Cams Down and Forum Errors

Post by Darlene » Tue Jun 26, 2018 1:57 pm

Thank you Judy for the update and thank you Ken!
Darlene, Langley, member since May 10 2006

User avatar
IrishEyes
Forum Assistant
Posts: 120323
Joined: Feb 09, 2018
Location: Nova Scotia, Canada

Re: Report Cams Down and Forum Errors

Post by IrishEyes » Tue Jun 26, 2018 7:18 pm

7:11pm

Re H Mills ..

Hi everyone

Both embedded cams are streaming at H Mills and thank you so much Ken. :grhug:

Correction .. Time is wrong on the S Cam
Image

HELPFUL HINTS.......Bev...member since 08/04/09

User avatar
JudyB
Admin
Posts: 17961
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Tue Jun 26, 2018 9:06 pm

I think Ken may still be working on things. I just checked and the following embedded cams seem to be streaming now:

Delta 2 West
Harrison Mills North
White Rock North

I tried rebooting Harrison Mills South, but that didn't jump-start the embedded cam, which makes me suspect that Ken may have to do some work with each individual stream to get it hooked up again to the Wowza server so it can be sent to YouTube, and has started with one cam from each nest.

A big thanks to Ken for all the time he's putting in on this!

User avatar
Sandy_W
Topic Assistant
Posts: 56441
Joined: Feb 22, 2018
Location: Arkansas

Re: Report Cams Down and Forum Errors

Post by Sandy_W » Wed Jun 27, 2018 7:32 am

7:31 am for Delta 2 east cam, this cam has been offline since sometime last night.
“Eagles: When they walk, they stumble. They are not what one would call graceful. They were not designed to walk. They fly. And when they fly, oh, how they fly, so free, so graceful. They see from the sky what we never see.” – Unknown

User avatar
JudyB
Admin
Posts: 17961
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Wed Jun 27, 2018 9:14 am

9:09 am
I just got off the phone with Ken, and all the embedded cams should be streaming now except Harrison Mills South, and he's working on that next. You may need to refresh/reload the page.

Thank you, Ken!

User avatar
SueB
Zoomer
Posts: 47269
Joined: Feb 20, 2018
Location: SW Florida

Re: Report Cams Down and Forum Errors

Post by SueB » Wed Jun 27, 2018 1:42 pm

1:27 pm - Delta 2 Cams all went down at this time. I was on the zoomer cams at the time and W Cam is on the nest, but E Cam is slightly off as I was trying to following one of the adults when the cams went down. The W Cam zoomer screen gave me this error message.
2018-06-27 16_37_33-Window.jpg

Edit: Cams came back long enough for me to get the E Cam back on the nest but they are going off and on again so I will log out of the zoomer cams when I can.

User avatar
IrishEyes
Forum Assistant
Posts: 120323
Joined: Feb 09, 2018
Location: Nova Scotia, Canada

Re: Report Cams Down and Forum Errors

Post by IrishEyes » Thu Jun 28, 2018 11:06 am

THURSDAY , JUNE 28, 2018

Good Afternoon
'
Re Harrison Mils

10:59am...... The S embedded cam has a spinning circle .. maybe a roboot will help.. it does however come back if I refresh the cams , but it doesn't last .. :)


The S PTZ Cam is working well

T hank You

Bev
screenshot_01.jpg
Image

HELPFUL HINTS.......Bev...member since 08/04/09

User avatar
JudyB
Admin
Posts: 17961
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Thu Jun 28, 2018 2:40 pm

IrishEyes wrote:
Thu Jun 28, 2018 11:06 am
THURSDAY , JUNE 28, 2018

Good Afternoon
'
Re Harrison Mils

10:59am...... The S embedded cam has a spinning circle .. maybe a roboot will help.. it does however come back if I refresh the cams , but it doesn't last .. :)


The S PTZ Cam is working well

T hank You

Bev

screenshot_01.jpg
I just brought up the embedded cams, and it's working now - will watch it for a while and do a reboot if it goes to the spinning circle again.

User avatar
IrishEyes
Forum Assistant
Posts: 120323
Joined: Feb 09, 2018
Location: Nova Scotia, Canada

Re: Report Cams Down and Forum Errors

Post by IrishEyes » Thu Jun 28, 2018 4:13 pm

JudyB wrote:
Thu Jun 28, 2018 2:40 pm
IrishEyes wrote:
Thu Jun 28, 2018 11:06 am
THURSDAY , JUNE 28, 2018

Good Afternoon
'
Re Harrison Mils

10:59am...... The S embedded cam has a spinning circle .. maybe a roboot will help.. it does however come back if I refresh the cams , but it doesn't last .. :)


The S PTZ Cam is working well

T hank You

Bev

screenshot_01.jpg
I just brought up the embedded cams, and it's working now - will watch it for a while and do a reboot if it goes to the spinning circle again.
Thanks Judy they seem to be working fine now !
Image

HELPFUL HINTS.......Bev...member since 08/04/09

User avatar
SueB
Zoomer
Posts: 47269
Joined: Feb 20, 2018
Location: SW Florida

Re: Report Cams Down and Forum Errors

Post by SueB » Fri Jun 29, 2018 7:40 pm

Good Evening! The E Embedded Cam for Delta 2 went down at 8:30 pm. Both zoomer cams are working and the W Embedded cam is also working, so it's just the E Embedded cam that is down.....like a few days ago.

User avatar
JudyB
Admin
Posts: 17961
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Sat Jun 30, 2018 8:29 am

Thanks, Sue. It's looking OK now, so I'm guessing Ken rebooted something.

Please do feel free to send me a PM or an email if you don't see me online when there is a cam issue or you'd like one of the cams rebooted - I may not see that for a while either, but I usually do see those sooner. Thanks!

DDuckies2
Zoomer
Posts: 12101
Joined: Feb 22, 2018
Location: White Rock/Surrey BC

Re: Report Cams Down and Forum Errors

Post by DDuckies2 » Sat Jun 30, 2018 2:49 pm

WHITE ROCK CAMS: Zooming is Stop and go , jerky and says buffering , so maybe a reboot is called for all 3 cams :D :bye 1:
:grhug:

User avatar
JudyB
Admin
Posts: 17961
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Sat Jun 30, 2018 5:23 pm

Forgot to post here, but I rebooted the White Rock cams.

Post Reply

Return to “Technical Help”