Report Cams Down and Forum Errors
Re: Report Cams Down and Forum Errors
Thanks, Yolande and SueB!
I'll start by trying to reboot the South cam at Harrison Mills. Then I'll take a look at the Delta cams.
Added -
The reboot worked and HM South is live and streaming at the current time again.
The Delta cams are streaming with the correct time, and I'm reluctant to try rebooting them - will take a look in the early morning when less people are likely to be watching.
I'll start by trying to reboot the South cam at Harrison Mills. Then I'll take a look at the Delta cams.
Added -
The reboot worked and HM South is live and streaming at the current time again.
The Delta cams are streaming with the correct time, and I'm reluctant to try rebooting them - will take a look in the early morning when less people are likely to be watching.
2023 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
MONDAY, MAY 28, 2018
Good Morning !
Re Harrison Mills......
The N embedded Cam is down ... spinning circle and time is on 11:06pm May 27 .. so maybe that was when it went down ..I can connect to the NPTZ Cam
Thank you !
Good Morning !
Re Harrison Mills......
The N embedded Cam is down ... spinning circle and time is on 11:06pm May 27 .. so maybe that was when it went down ..I can connect to the NPTZ Cam
Thank you !
Re: Report Cams Down and Forum Errors
5:59 am
I am still signed into the North cam on my laptop as part of our plan to always have at least one person signed in. I'm going to try the reboot on my desktop - which should be just a little blip for the laptop.
6:03 am
It worked - North embedded cam is streaming again.
I am still signed into the North cam on my laptop as part of our plan to always have at least one person signed in. I'm going to try the reboot on my desktop - which should be just a little blip for the laptop.
6:03 am
It worked - North embedded cam is streaming again.
2023 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
Thanks Judy !JudyB wrote: ↑Mon May 28, 2018 6:00 am5:59 am
I am still signed into the North cam on my laptop as part of our plan to always have at least one person signed in. I'm going to try the reboot on my desktop - which should be just a little blip for the laptop.
6:03 am
It worked - North embedded cam is streaming again.
Re: Report Cams Down and Forum Errors
8:20 am - Delta 2 Cams - Good Morning! All cams keep going off and on. I was just on the zoomer cams (since 7:00 am) and after about an hour they started hesitating and then going off and on. Very high winds there this morning so not sure if that has anything to do with it. Both cams are on the nest and I am now logged off them.
8:27 am - Seems that the embedded cams have been down since 8:17 am. At least that is the last time I see on the YT screen, although it's showing them down for only 5 minutes.....more like 10 minutes now.
8:27 am - Seems that the embedded cams have been down since 8:17 am. At least that is the last time I see on the YT screen, although it's showing them down for only 5 minutes.....more like 10 minutes now.
Re: Report Cams Down and Forum Errors
8:51 am
I gave it a quick try and couldn't connect with East, and got partway into West, but was worried about continuing as it was taking so long. I'll send an email to Ken to let him know as he has more things to try. And West embedded cam just came back up, though it's very choppy.
I gave it a quick try and couldn't connect with East, and got partway into West, but was worried about continuing as it was taking so long. I'll send an email to Ken to let him know as he has more things to try. And West embedded cam just came back up, though it's very choppy.
2023 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
9:00 am
David Hathaway reported that he's moving the HWF website to a different hosting provider (sort of like moving it to another server or hard drive). I'm not sure if the forum is part of that, but the cam pages may go down briefly as they're switched over. (Or not - he's very good at this - but he and I wanted to let people know it might happen.)
David Hathaway reported that he's moving the HWF website to a different hosting provider (sort of like moving it to another server or hard drive). I'm not sure if the forum is part of that, but the cam pages may go down briefly as they're switched over. (Or not - he's very good at this - but he and I wanted to let people know it might happen.)
2023 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
6:56 am
South embedded cam at Harrison Mills has a spinning circle - I'm going to see if I can reboot it.
7:00 am - done, and embedded cam is streaming again
South embedded cam at Harrison Mills has a spinning circle - I'm going to see if I can reboot it.
7:00 am - done, and embedded cam is streaming again
2023 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
9:52am............The cams are continuing to go off and on at Delta2 (yesterday....several times). Last night I did not even try to log in as when I got there the cams went down as they have been doing yesterday and for several days now. I see the rollback was checked overnight and they were down then too at 3:40am.
I have not checked yet today, will give it a try now to see how the cams do, but just thought I should let you all know this problem is still occurring.
10:51am............ADDED: I was on zoomer cams for about an hour. They were fine but when I checked the rollback upon getting there, it only went back a few minutes so I am guessing the cams were still going off and on before then.
I have not checked yet today, will give it a try now to see how the cams do, but just thought I should let you all know this problem is still occurring.
10:51am............ADDED: I was on zoomer cams for about an hour. They were fine but when I checked the rollback upon getting there, it only went back a few minutes so I am guessing the cams were still going off and on before then.
"Volunteers do not necessarily have the time..............they have the heart"..........Elizabeth Andrew
(Member since 9/10/11)
(Member since 9/10/11)
Re: Report Cams Down and Forum Errors
2:13pm...........All cams at Delta2 have continued to go off and on all day. They usually go off for only a second or two, then come back but can go off again right away or else they are fine for some time.
"Volunteers do not necessarily have the time..............they have the heart"..........Elizabeth Andrew
(Member since 9/10/11)
(Member since 9/10/11)
Re: Report Cams Down and Forum Errors
1:23pm...........Is there any word yet on why the cams are going on and off at Delta2?
"Volunteers do not necessarily have the time..............they have the heart"..........Elizabeth Andrew
(Member since 9/10/11)
(Member since 9/10/11)
Re: Report Cams Down and Forum Errors
Good Afternoon .
1:56pm Re H Mills S cam
It has spinning circle and time is incorrect at 1:03pm
Thank You
'Bev
1:56pm Re H Mills S cam
It has spinning circle and time is incorrect at 1:03pm
Thank You
'Bev
Re: Report Cams Down and Forum Errors
3:27 pm
Thanks, Bev! I just got home, and see that time is still off, so I'll see if I can reboot the South cam.
2023 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
Re: Report Cams Down and Forum Errors
Good Morning Everyone! Seems like the Delta 2 East Cam (embedded cam) is having the same problem that HM had yesterday. It has the spinning circle and an incorrect time on it (says 5:58 am when it's actually 6:44 am). I haven't been on the zoomer cams but Sandy_W Was earlier and mentioned that the E Cam was stuttering.
Have a great day everyone!
Have a great day everyone!