Report Cams Down and Forum Errors
Re: Report Cams Down and Forum Errors
Hi Judy the H Mills Cam just went to Black Screen
TY Bev
PS Sorry Judy I just saw your post
TY Bev
PS Sorry Judy I just saw your post
Re: Report Cams Down and Forum Errors
Thanks, Bev - I think we were posting at the same time. And I appreciate the post - I was at my computer so saw it happen this time, but that's not always the case.
2023 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
Re: Report Cams Down and Forum Errors
Jean wrote: ↑Fri Jan 13, 2023 10:19 pm10:17pm............At SR............. N embedded cam is about 45 seconds behind the zoomer cam. The S cam is about 1 minute behind the zoomer cam.
Is it possible to move this time closer together for the embedded cams and zoomer cams? This is too long and frustrating if a zoomer is using the cams to follow any action. Thanks.
Thanks for your reports, Jean and Sandy, and the good documentation. I did hear from Ken, and there's nothing he can do to fix the problem. He said that the time stamp in the OBS program that he uses to send the feed from the camera to YouTube was only a few seconds behind the time he saw when logging into the cams directly - so refreshing the stream wouldn't help because the correct time was already being sent from his computer.Sandy_W wrote: ↑Sat Jan 14, 2023 5:51 am5:50 am at Surrey, thanks, Jean, for noticing the times off between the embedded cams and zoomer cams. Yes, I had to wait to get a scap for about a minute of SF making a crop drop. For example, getting scraps going back and forth between night perch and nest...had to wait the time to catch the scaps for the posts. Anyway, I have these screenshots to show the difference in times for both cams. Would be nice for the time difference to be corrected. 2023-01-14_7-48-51.jpg2023-01-14_7-49-01.jpg
Neither Ken nor I have any clue where the delay is happening. I just checked and Surrey North embedded is about 45 seconds behind for me, and Surrey South embedded is almost a minute behind - about the same as you reported this morning, Sandy - so I don't think it's anything to do with our local internet or browsers or anything like that - though they can cause issues. I checked another cam that streams through YouTube, and it was was about 30 seconds behind real time (though I don't know what their zoomer link would show since I'm not a zoomer there).
Sorry I don't have better news - but we really don't have any idea what else we can try.
2023 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
WHITE ROCK
NORTH live stream is lagging just over an hour behind.
NORTH live stream is lagging just over an hour behind.
Re: Report Cams Down and Forum Errors
Thanks, DDuckies - I've let Ken know.
2023 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
Good Morning Everyone! The Delta 2 West Embedded Cam is stuck at 11:07 pm. The east cam is okay, and so are both zoomer cams.
Re: Report Cams Down and Forum Errors
Thanks, Sue - I'll let Ken know.
2023 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
jan 26.
WHITE ROCK
NORTH is streaming 30 minutes behind.
WHITE ROCK
NORTH is streaming 30 minutes behind.
Re: Report Cams Down and Forum Errors
8:38 am
Thanks, DDuckies - I just checked the cam and it was the same time as all the rest, so it's possible that Ken recently refreshed the stream. If you're still seeing it 30 minutes behind, you might try doing shift+refresh/reload - that sort of "hard refresh" makes the page re-import everything rather than using cached information.
If that doesn't work, please let me know and we'll see what else we can try.
2023 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
Yes its on time now.JudyB wrote: ↑Thu Jan 26, 2023 8:46 am8:38 am
Thanks, DDuckies - I just checked the cam and it was the same time as all the rest, so it's possible that Ken recently refreshed the stream. If you're still seeing it 30 minutes behind, you might try doing shift+refresh/reload - that sort of "hard refresh" makes the page re-import everything rather than using cached information.
If that doesn't work, please let me know and we'll see what else we can try.
Re: Report Cams Down and Forum Errors
10:21 am from Surrey, reported through email both embedded cams are freezing and then running and then freezing again. I got on the zoomer cams and they were working fine.
“Eagles: When they walk, they stumble. They are not what one would call graceful. They were not designed to walk. They fly. And when they fly, oh, how they fly, so free, so graceful. They see from the sky what we never see.” – Unknown
Re: Report Cams Down and Forum Errors
Surrey - N cam froze while I was checking DVR and then went black at approximately 11:03 am. S cam followed suit at 11:05 am.
Re: Report Cams Down and Forum Errors
2:52 pm from Surrey, both embedded cams are frozen at 1:00 pm however will jump forward in second time jumps.
“Eagles: When they walk, they stumble. They are not what one would call graceful. They were not designed to walk. They fly. And when they fly, oh, how they fly, so free, so graceful. They see from the sky what we never see.” – Unknown
Re: Report Cams Down and Forum Errors
Good Afternoon All! Sorry I forgot to report this earlier today when I was on the Delta cams but the East embedded cam is stuttering, and jumping ahead in time. When I was zooming I did have some hesitation in panning but thought it was just me. When I went to the embedded cam screen it was stuttering in the same spots as when I was on the zoomer cam. I just went to check the rollback and it seems to be doing the same thing still.