Report Cams Down and Forum Errors

Report cams up/down or if you need technical assistance.
User avatar
JudyB
Admin
Posts: 17990
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Wed Mar 29, 2023 3:33 am

RoseA wrote:
Tue Mar 28, 2023 7:20 pm
7:20pm Delta2
It looks like the East embedded cam has been frozen since 6:57pm.
Thanks, Rose - looking good now, so I think Ken restarted the stream.

DDuckies2
Zoomer
Posts: 12147
Joined: Feb 22, 2018
Location: White Rock/Surrey BC

Re: Report Cams Down and Forum Errors

Post by DDuckies2 » Mon Apr 03, 2023 11:38 am

WHITE ROCK
CU . zoomer cam is struggling , stop and go, and very slow to respond. Can you check if this is just happening on my end . TY
:grhug:

User avatar
JudyB
Admin
Posts: 17990
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Mon Apr 03, 2023 11:47 am

DDuckies2 wrote:
Mon Apr 03, 2023 11:38 am
WHITE ROCK
CU . zoomer cam is struggling , stop and go, and very slow to respond. Can you check if this is just happening on my end . TY
Logging in to check.

Added -
Presets worked well, but zooming didn't. I'm going to try a reboot of the camera - may take a few minutes for me to get everything streaming again.

User avatar
JudyB
Admin
Posts: 17990
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Mon Apr 03, 2023 11:58 am

DDuckies2 wrote:
Mon Apr 03, 2023 11:38 am
WHITE ROCK
CU . zoomer cam is struggling , stop and go, and very slow to respond. Can you check if this is just happening on my end . TY
I did the reboot and everything is streaming, but it still seems a bit choppy - internet in the area may be a bit slow?

I am logged out.

DDuckies2
Zoomer
Posts: 12147
Joined: Feb 22, 2018
Location: White Rock/Surrey BC

Re: Report Cams Down and Forum Errors

Post by DDuckies2 » Mon Apr 03, 2023 12:22 pm

JudyB wrote:
Mon Apr 03, 2023 11:58 am
DDuckies2 wrote:
Mon Apr 03, 2023 11:38 am
WHITE ROCK
CU . zoomer cam is struggling , stop and go, and very slow to respond. Can you check if this is just happening on my end . TY
I did the reboot and everything is streaming, but it still seems a bit choppy - internet in the area may be a bit slow?

I am logged out.
12:20pm Just tried CU zooming and yes a big improvement but as you said still a little choppy at times. Internet seems fine here. I will be back later this afternoon and check how it is behaving :luck: . :bye 1:
:grhug:

amyklai
Zoomer
Posts: 2162
Joined: Jan 06, 2022

Re: Report Cams Down and Forum Errors

Post by amyklai » Tue Apr 04, 2023 7:02 am

7.02a good morning, WR/ NORTH is lugging behind

User avatar
JudyB
Admin
Posts: 17990
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Tue Apr 04, 2023 7:35 am

Amyklai wrote:
Tue Apr 04, 2023 7:02 am
7.02a good morning, WR/ NORTH is lugging behind
Thanks, Amy - stream has been restarted!

It does seem that North needs to have that done once or twice a day - no clue why.

amyklai
Zoomer
Posts: 2162
Joined: Jan 06, 2022

Re: Report Cams Down and Forum Errors

Post by amyklai » Wed Apr 05, 2023 7:47 am

7.46a WR/ CU/ NORTH need a reboot
Attachments
Screenshot_34.jpg
Screenshot_35.jpg

User avatar
JudyB
Admin
Posts: 17990
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Wed Apr 05, 2023 8:20 am

Amyklai wrote:
Wed Apr 05, 2023 7:47 am
7.46a WR/ CU/ NORTH need a reboot
Thanks, Amy - I noticed that, but also saw several cams flash to black about that time so suspected the streams were being rebooted, and didn't want to try anything until I was sure no one else was doing something.

It does look as if it's lagging behind, so I'll try refreshing the stream to fix that and see if that helps.

User avatar
Sandy_W
Topic Assistant
Posts: 56628
Joined: Feb 22, 2018
Location: Arkansas

Re: Report Cams Down and Forum Errors

Post by Sandy_W » Wed Apr 05, 2023 10:58 am

10:57 am from Surrey, I was on the both cams and the south cam zoomer cam controls were not functioning well. Jerky and would go in a different area when I would use the controls. The north cam zoomer controls were fine.
“Eagles: When they walk, they stumble. They are not what one would call graceful. They were not designed to walk. They fly. And when they fly, oh, how they fly, so free, so graceful. They see from the sky what we never see.” – Unknown

User avatar
JudyB
Admin
Posts: 17990
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Wed Apr 05, 2023 11:18 am

Sandy_W wrote:
Wed Apr 05, 2023 10:58 am
10:57 am from Surrey, I was on the both cams and the south cam zoomer cam controls were not functioning well. Jerky and would go in a different area when I would use the controls. The north cam zoomer controls were fine.
With a bit of fear and trepidation, I'm going to try rebooting the cam; there's a chance that will reset the dvr, but it looks as if we're pretty much up to date.


11:23 am
Reboot done and stream restarted. Settings probably a bit different.

DDuckies2
Zoomer
Posts: 12147
Joined: Feb 22, 2018
Location: White Rock/Surrey BC

Re: Report Cams Down and Forum Errors

Post by DDuckies2 » Sat Apr 08, 2023 8:58 am

WHITE ROCK
All live stream cams are pixilating. Not that windy there yet so not sure what else could be the cause.
:%: An update .lol. only a few minutes later- seems the wind is starting to pick up now.
:grhug:

User avatar
Sandy_W
Topic Assistant
Posts: 56628
Joined: Feb 22, 2018
Location: Arkansas

Re: Report Cams Down and Forum Errors

Post by Sandy_W » Sat Apr 08, 2023 10:30 am

10:30 am from Surrey Reserve, the south cam is frozen at 9:00 am.
“Eagles: When they walk, they stumble. They are not what one would call graceful. They were not designed to walk. They fly. And when they fly, oh, how they fly, so free, so graceful. They see from the sky what we never see.” – Unknown

User avatar
JudyB
Admin
Posts: 17990
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Sat Apr 08, 2023 11:33 am

Sandy_W wrote:
Sat Apr 08, 2023 10:30 am
10:30 am from Surrey Reserve, the south cam is frozen at 9:00 am.
Thanks, Sandy - Fixed!

User avatar
JudyB
Admin
Posts: 17990
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Sat Apr 08, 2023 11:39 am

DDuckies2 wrote:
Sat Apr 08, 2023 8:58 am
WHITE ROCK
All live stream cams are pixilating. Not that windy there yet so not sure what else could be the cause.
:%: An update .lol. only a few minutes later- seems the wind is starting to pick up now.
There definitely seems to be major wind, and the cams are looking OK as far as pixelating, though one could get a bit seasick watching them, so I'm going to wait a bit. If you're still having issues, please let me know and I'll see what we can do.

Post Reply

Return to “Technical Help”