Report Cams Down and Forum Errors
Re: Report Cams Down and Forum Errors
Saturday November 12, 2022
Good Morning Judy !
Re H Mills N Embedded cam has Black Screen , Last feed was around 1:20a ,N PtZ Cam is streaming .
Thank You ,
Bev
Good Morning Judy !
Re H Mills N Embedded cam has Black Screen , Last feed was around 1:20a ,N PtZ Cam is streaming .
Thank You ,
Bev
Re: Report Cams Down and Forum Errors
5:04 am
Thanks, Bev - I've restarted the feed to YouTube.
2023 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
Thank you so much Judy! Hugs, Bev
Re: Report Cams Down and Forum Errors
Hi Judy , HM live feed went to black screen 6:33 pm
Re: Report Cams Down and Forum Errors
HI Judy NPTZ Cam is down also
Thanks Bev. I hope and Pray it comes back soon .
Re: Report Cams Down and Forum Errors
Thanks, Heather and Bev - I also hope it's back soon.
I didn't see anything on the power outages site, though it may take a while before things show up there.
I'll let Ken know, and check again in the morning in the hopes that it's come back.
I didn't see anything on the power outages site, though it may take a while before things show up there.
I'll let Ken know, and check again in the morning in the hopes that it's come back.
2023 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
5:07 am checking in to see a report has been made for the video unavailable for the embedded cams. Also happening at Surrey too. Note: I was able to log into the south cam without any issues.
“Eagles: When they walk, they stumble. They are not what one would call graceful. They were not designed to walk. They fly. And when they fly, oh, how they fly, so free, so graceful. They see from the sky what we never see.” – Unknown
Re: Report Cams Down and Forum Errors
7.22a WR is down too
Re: Report Cams Down and Forum Errors
7:47 am
Good morning, everyone. I suspect Ken's computer went off during the night. I sent an email to him when I saw Sandy's message, and I see that one of the Surrey cams is streaming, so I suspect that he's now in the process of restarting all the streams.
7:51 am
Delta and Surrey cams are back, and White Rock North. I suspect the other two WR cams will be back soon.
7:52 am
White Rock CU is back.
When the computer doing the streaming crashes, Ken has to open the streaming software for each of the cams and restart it. It only takes a minute or two to do that for each cam (if all goes well), but with 7 cams, the whole process takes a while.
And all WR cams are streaming as of 7:55, though it's very foggy there this morning so not a lot to sea.
2023 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
from Surrey at 11:50 am the north cam is frozen at 11:34 am.
“Eagles: When they walk, they stumble. They are not what one would call graceful. They were not designed to walk. They fly. And when they fly, oh, how they fly, so free, so graceful. They see from the sky what we never see.” – Unknown
Re: Report Cams Down and Forum Errors
Thanks, Sandy - message sent to Ken.
Added -
12:32 pm - cam is streaming.
Thanks, Ken!
2023 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
2:27 pm
It looks as if Delta West embedded is frozen at 12:55 pm. I logged in quickly and the cam itself looks fine, so I'll send an email to Ken so he can check the feed to YouTube.
It looks as if Delta West embedded is frozen at 12:55 pm. I logged in quickly and the cam itself looks fine, so I'll send an email to Ken so he can check the feed to YouTube.
2023 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
1:06pm the East-Cam is behaving very badly at Delta2. It may be it can't handle all of the additional movement because of the wind. Both cams do pixelate more during the wind but E-Cam especially.
This is what's happening a lot when looking at the embedded E-cam view. When looking through the zoomer E-cam it's black screen constantly unless you are using Stream 3. Usually I can switch back and forth when moving it and when it's stationery, but not today.
This is what's happening a lot when looking at the embedded E-cam view. When looking through the zoomer E-cam it's black screen constantly unless you are using Stream 3. Usually I can switch back and forth when moving it and when it's stationery, but not today.
“The eyesight for an eagle is what thought is to a man.”
― Dejan Stojanovic, The Creator
― Dejan Stojanovic, The Creator
Re: Report Cams Down and Forum Errors
I noticed that as well, Rose - and I think it is the wind. I'm not sure which cam needed to have its cabling spliced, but it seems to me that could also make it more sensitive to motion from the wind. And I've noticed that the cam shakes when an owl lands on the big sticks attached to the nest shade and cam supports - so there is a bit of give somewhere.RoseA wrote: ↑Sat Nov 26, 2022 1:10 pm1:06pm the East-Cam is behaving very badly at Delta2. It may be it can't handle all of the additional movement because of the wind. Both cams do pixelate more during the wind but E-Cam especially.
This is what's happening a lot when looking at the embedded E-cam view.
Nov26-Pixel.jpg
When looking through the zoomer E-cam it's black screen constantly unless you are using Stream 3. Usually I can switch back and forth when moving it and when it's stationery, but not today.
I'll mention it to Ken, but I don't think there's anything that can be done.
2023 Eaglet Info ~ ~ ~ ~ ~ Helpful Hints
Re: Report Cams Down and Forum Errors
Hi Judy . HM cam is stalled at 8:01 pm