Thanks, Sandy! I posted more details on the zoomer thread, but one thing you might try is changing the resolution of the window you use for zooming from Stream 1 to SubStream/Stream 2 - that reduces the bandwidth needed and might help stop the pixelating. The cam was behaving nicely while I was on it, so this is just a theory until one of you zoomers can try it when the cam is sticking and pixelating.Sandy_W wrote: ↑Mon Sep 26, 2022 7:57 amFrom Delta east cam, the east cam is lagging and pixelating. These two images are at the same time, one from the east zoomer cam with the pixelating image and the other from the cam view, which does not show the pixelating. I noticed sometimes when the east zoomer cam would lag some, the cam view would have a circle spinning but not always.2022-09-26_9-41-42.jpg2022-09-26_9-33-14.jpg
As an aside to others who are interested, we normally have the Vivotek cams set so the zoomers use a lower resolution window for zooming to reduce the bandwidth required and allow us to have the embedded cam we are viewing at the highest possible resolution, so this would be similar to what we've been doing with other cams.