Report Cams Down and Forum Errors

Report cams up/down or if you need technical assistance.
Heather L
Zoomer
Posts: 31272
Joined: Feb 24, 2018

Re: Report Cams Down and Forum Errors

Post by Heather L » Fri May 20, 2022 7:01 am

Hi Judy ,?6:56 am HM went to back screen

User avatar
JudyB
Admin
Posts: 14167
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Fri May 20, 2022 7:25 am

Heather L wrote:
Fri May 20, 2022 7:01 am
Hi Judy ,?6:56 am HM went to back screen
Thanks, Heather - I've restarted the feed.

User avatar
IrishEyes
Forum Assistant
Posts: 104153
Joined: Feb 09, 2018
Location: Nova Scotia, Canada

Re: Report Cams Down and Forum Errors

Post by IrishEyes » Sat May 21, 2022 4:27 am

SATURDAY MAY 21, 2022
Good Morning Judy ,
Re H Mills .........Cam has Black Screen ..last live feed was 2:15am
N PtZ cam is streaming
TY Bev.
Image

HELPFUL HINTS.......Bev...member since 08/04/09

User avatar
JudyB
Admin
Posts: 14167
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Sat May 21, 2022 5:21 am

IrishEyes wrote:
Sat May 21, 2022 4:27 am
SATURDAY MAY 21, 2022
Good Morning Judy ,
Re H Mills .........Cam has Black Screen ..last live feed was 2:15am
N PtZ cam is streaming
TY Bev.
5:20 am
Thanks, Bev - I've restarted the stream.

User avatar
IrishEyes
Forum Assistant
Posts: 104153
Joined: Feb 09, 2018
Location: Nova Scotia, Canada

Re: Report Cams Down and Forum Errors

Post by IrishEyes » Sat May 21, 2022 5:32 am

JudyB wrote:
Sat May 21, 2022 5:21 am
IrishEyes wrote:
Sat May 21, 2022 4:27 am
SATURDAY MAY 21, 2022
Good Morning Judy ,
Re H Mills .........Cam has Black Screen ..last live feed was 2:15am
N PtZ cam is streaming
TY Bev.
5:20 am
Thanks, Bev - I've restarted the stream.

Thank you Judy!
Image

HELPFUL HINTS.......Bev...member since 08/04/09

User avatar
IrishEyes
Forum Assistant
Posts: 104153
Joined: Feb 09, 2018
Location: Nova Scotia, Canada

Re: Report Cams Down and Forum Errors

Post by IrishEyes » Sat May 21, 2022 6:40 am

Good Morning again Judy .. the forum is not accepting s' Caps

Thank you
Bev
Image

HELPFUL HINTS.......Bev...member since 08/04/09

User avatar
Kitcat11848
Topic Assistant
Posts: 11340
Joined: Feb 24, 2018
Location: Baton Rouge/ New Orleans,LA area

Re: Report Cams Down and Forum Errors

Post by Kitcat11848 » Sat May 21, 2022 6:44 am

Good Morning Judy, the whole HWF forum site is moving extremely slow for me this morning too, uploads, downloads.
8:50 CST
It’s working much better now
AKA: Marianne

User avatar
IrishEyes
Forum Assistant
Posts: 104153
Joined: Feb 09, 2018
Location: Nova Scotia, Canada

Re: Report Cams Down and Forum Errors

Post by IrishEyes » Sat May 21, 2022 6:56 am

I cleared my History and I can add S ' Caps
Image

HELPFUL HINTS.......Bev...member since 08/04/09

User avatar
JudyB
Admin
Posts: 14167
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Sat May 21, 2022 8:22 am

Thanks for your reports, Bev and Marianne, and I'm glad things are working better now!

Heather L
Zoomer
Posts: 31272
Joined: Feb 24, 2018

Re: Report Cams Down and Forum Errors

Post by Heather L » Mon May 23, 2022 11:11 pm

Hi Judy HM went to Black Screen 9:47 pm May 23

User avatar
JudyB
Admin
Posts: 14167
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Tue May 24, 2022 7:34 am

Heather L wrote:
Mon May 23, 2022 11:11 pm
Hi Judy HM went to Black Screen 9:47 pm May 23
Thanks, Heather - I restarted it but forgot to post here.

User avatar
IrishEyes
Forum Assistant
Posts: 104153
Joined: Feb 09, 2018
Location: Nova Scotia, Canada

Re: Report Cams Down and Forum Errors

Post by IrishEyes » Thu May 26, 2022 12:08 pm

THURSDAY MAY 26 , 2022

11:27 H Mills Cam has no sound
Ty Bev
Image

HELPFUL HINTS.......Bev...member since 08/04/09

User avatar
JudyB
Admin
Posts: 14167
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Thu May 26, 2022 2:34 pm

IrishEyes wrote:
Thu May 26, 2022 12:08 pm
THURSDAY MAY 26 , 2022

11:27 H Mills Cam has no sound
Ty Bev
Thanks, Bev -

Ken has taken over streaming the cam (he saw if down and I wasn't home when he called). I'll check with him and see if he has time to refresh the stream to see if that helps, or if he'd like me to take over streaming now that I'm home again.

User avatar
IrishEyes
Forum Assistant
Posts: 104153
Joined: Feb 09, 2018
Location: Nova Scotia, Canada

Re: Report Cams Down and Forum Errors

Post by IrishEyes » Thu May 26, 2022 2:44 pm

JudyB wrote:
Thu May 26, 2022 2:34 pm
IrishEyes wrote:
Thu May 26, 2022 12:08 pm
THURSDAY MAY 26 , 2022

11:27 H Mills Cam has no sound
Ty Bev
Thanks, Bev -

Ken has taken over streaming the cam (he saw if down and I wasn't home when he called). I'll check with him and see if he has time to refresh the stream to see if that helps, or if he'd like me to take over streaming now that I'm home again.
uote]
Thank you Judy ! Hope all is well with you :hug:
Image

HELPFUL HINTS.......Bev...member since 08/04/09

User avatar
IrishEyes
Forum Assistant
Posts: 104153
Joined: Feb 09, 2018
Location: Nova Scotia, Canada

Re: Report Cams Down and Forum Errors

Post by IrishEyes » Fri May 27, 2022 1:57 am

FRIDAY MAY 27, 2022
Good Early Morning Judy ,
1:44am Nest time. Problem with sound on the H Mills Cam ... It is ticking .
TY Bev.
Image

HELPFUL HINTS.......Bev...member since 08/04/09

User avatar
JudyB
Admin
Posts: 14167
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Fri May 27, 2022 7:33 am

IrishEyes wrote:
Fri May 27, 2022 1:57 am
FRIDAY MAY 27, 2022
Good Early Morning Judy ,
1:44am Nest time. Problem with sound on the H Mills Cam ... It is ticking .
TY Bev.
:chin: I hear it too, Bev - but I also hear it when I log into the cam directly. I checked the sound level on the cam, and it's not especially high - but Ken may have increased it a bit when the sound was low yesterday. I tried lowering it briefly and the clicks were still there, just a bit softer, so I put it back to 50% where I found it.

It may also be weather-related, though it seems too steady to be water dripping.

I'm going to be away part of the day (all good - Charlie and I will be doing a bit of work on the family farm that my nephew bought as part of the estate settlement when my brother died) - may be able to look at this a bit more later today or tomorrow.

User avatar
IrishEyes
Forum Assistant
Posts: 104153
Joined: Feb 09, 2018
Location: Nova Scotia, Canada

Re: Report Cams Down and Forum Errors

Post by IrishEyes » Fri May 27, 2022 7:40 am

JudyB wrote:
Fri May 27, 2022 7:33 am
IrishEyes wrote:
Fri May 27, 2022 1:57 am
FRIDAY MAY 27, 2022
Good Early Morning Judy ,
1:44am Nest time. Problem with sound on the H Mills Cam ... It is ticking .
TY Bev.
:chin: I hear it too, Bev - but I also hear it when I log into the cam directly. I checked the sound level on the cam, and it's not especially high - but Ken may have increased it a bit when the sound was low yesterday. I tried lowering it briefly and the clicks were still there, just a bit softer, so I put it back to 50% where I found it.

It may also be weather-related, though it seems too steady to be water dripping.

I'm going to be away part of the day (all good - Charlie and I will be doing a bit of work on the family farm that my nephew bought as part of the estate settlement when my brother died) - may be able to look at this a bit more later today or tomorrow.
Thank you Judy ! Take Care :huggie: .... I am out for a while .... I will post when I can.
Image

HELPFUL HINTS.......Bev...member since 08/04/09

User avatar
IrishEyes
Forum Assistant
Posts: 104153
Joined: Feb 09, 2018
Location: Nova Scotia, Canada

Re: Report Cams Down and Forum Errors

Post by IrishEyes » Thu Jun 02, 2022 5:38 am

THURSDAY , JUNE 2 , 2022

Good Morming Judy....Re H Mills Cam

Ticking Sound.. Can any thing be done about that ?
Thanks ,
Bev
Image

HELPFUL HINTS.......Bev...member since 08/04/09

User avatar
JudyB
Admin
Posts: 14167
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Thu Jun 02, 2022 7:41 am

IrishEyes wrote:
Thu Jun 02, 2022 5:38 am
THURSDAY , JUNE 2 , 2022

Good Morming Judy....Re H Mills Cam

Ticking Sound.. Can any thing be done about that ?
Thanks ,
Bev
Thanks, Bev - message sent to Ken.

User avatar
IrishEyes
Forum Assistant
Posts: 104153
Joined: Feb 09, 2018
Location: Nova Scotia, Canada

Re: Report Cams Down and Forum Errors

Post by IrishEyes » Thu Jun 02, 2022 7:46 am

JudyB wrote:
Thu Jun 02, 2022 7:41 am
IrishEyes wrote:
Thu Jun 02, 2022 5:38 am
THURSDAY , JUNE 2 , 2022

Good Morming Judy....Re H Mills Cam

Ticking Sound.. Can any thing be done about that ?
Thanks ,
Bev
Thanks, Bev - message sent to Ken.
Thank You Judy !
Image

HELPFUL HINTS.......Bev...member since 08/04/09

Heather L
Zoomer
Posts: 31272
Joined: Feb 24, 2018

Re: Report Cams Down and Forum Errors

Post by Heather L » Thu Jun 02, 2022 10:13 pm

Hi Judy . Live feed is stalled 9:58 pm at HM

User avatar
JudyB
Admin
Posts: 14167
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Fri Jun 03, 2022 2:24 am

Heather L wrote:
Thu Jun 02, 2022 10:13 pm
Hi Judy . Live feed is stalled 9:58 pm at HM
Thanks, Heather! I've taken over the streaming for now, and will let Ken know. We may switch back to him tomorrow, or else we can keep it running from my computer until the next time the stream has a blip.

User avatar
JudyB
Admin
Posts: 14167
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Sat Jun 04, 2022 6:33 am

The Harrison Mills North cam went offline about 8:07 pm yesterday - the cam went to a blank screen when OBS, the software we use to convert the signal for YouTube, stopped receiving a signal, and neither Bev nor I are able to log into the cam directly using the normal zoomer link.

Heather and I both checked the BC Power Outages page (https://www.bchydro.com/power-outages/a ... e-map.html) and there are no reports of the power being out in the area.

We will continue to check the cam and the map, but it's looking as if it is an issue at the site.

The camera has gone offline and come back by itself a number of times before, so we are hoping for the best.

User avatar
IrishEyes
Forum Assistant
Posts: 104153
Joined: Feb 09, 2018
Location: Nova Scotia, Canada

Re: Report Cams Down and Forum Errors

Post by IrishEyes » Fri Jun 10, 2022 8:04 pm

Hi Judy .. I am posting this here June 11
6:40 pm nest time . No change and I also have been checking the PTZ Cam

Last live feed was June 3 at about 9:58pm
I am hoping there is nothing wrong with the Cam..... this seems like a long time for the Cam not to come back one its own .JMO .Maybe an issue at the site . If that is the case, it will need a nest/ site visit .
Hope you and Charlie are having . had a wonderful time away ,
Hugs
Bev
Image

HELPFUL HINTS.......Bev...member since 08/04/09

Amyklai
Posts: 1240
Joined: Jan 06, 2022

Re: Report Cams Down and Forum Errors

Post by Amyklai » Sun Jun 12, 2022 7:38 am

7.37a Can the WR cams have a reboot? thank you

User avatar
JudyB
Admin
Posts: 14167
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Sun Jun 12, 2022 8:35 am

Amyklai wrote:
Sun Jun 12, 2022 7:38 am
7.37a Can the WR cams have a reboot? thank you
Thanks, Amy - request sent.

User avatar
Jean
Topic Assistant
Posts: 34739
Joined: Feb 19, 2018
Location: Langley, BC

Re: Report Cams Down and Forum Errors

Post by Jean » Thu Jun 23, 2022 4:23 pm

4:21pm.......Just noticing at Delta2..........embedded cam seems to be blipping off every few seconds, then comes back on. Don't know if it is me or the cam so thought I'd better report it.

Oh, it just went black. And I see a spinning circle. And now it is back but blipping off again. Very windy today here.

Zoomer cam is ok.


ADDED: Once I hit the YT button for a new screen, the blipping stopped. :dunno:
"Volunteers do not necessarily have the time..............they have the heart"..........Elizabeth Andrew

(Member since 9/10/11)

User avatar
JudyB
Admin
Posts: 14167
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Thu Jun 23, 2022 5:08 pm

Jean wrote:
Thu Jun 23, 2022 4:23 pm
4:21pm.......Just noticing at Delta2..........embedded cam seems to be blipping off every few seconds, then comes back on. Don't know if it is me or the cam so thought I'd better report it.

Oh, it just went black. And I see a spinning circle. And now it is back but blipping off again. Very windy today here.

Zoomer cam is ok.


ADDED: Once I hit the YT button for a new screen, the blipping stopped. :dunno:
White Rock CU was either flashing back and forth with a black screen or going back to the start of the dvr constantly, depending on the browser - and still seems to be doing that. WR WA wasn't. One of the Surrey cams was going to spinning circle often, the other wasn't. Maybe something with YouTube?

I'll mention it to Ken, but not sure there's a lot we can do.

User avatar
JudyB
Admin
Posts: 14167
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Thu Jun 23, 2022 6:14 pm

Surrey North is doing something similar (Surrey South is fine) - and like White Rock CU, the cam is fine when I log in directly (and I checked and there was only one of us in at a time, so that wasn't a factor).

I've sent a message to Ken so hopefully he'll be able to do something.

The DVR part seems to be working fine, so if you just have the cam up to keep an eye on it, having it playing what happened five minutes ago might be more peaceful.

User avatar
JudyB
Admin
Posts: 14167
Joined: Dec 09, 2017
Location: Midcoast Maine

Re: Report Cams Down and Forum Errors

Post by JudyB » Fri Jun 24, 2022 9:02 am

Friday, June 24

Ken will be doing some work on his server later today, so all the embedded cams will be offline while that happens. This should not affect the ability of zoomers to use the cams, but will reset the dvr.

Post Reply

Return to “Technical Help”