Page 951 of 996

Re: Harrison Mills Observation and Discussion Nest thread ..2018--2019

Posted: Mon Sep 02, 2019 2:07 pm
by Jean
2:06pm........The view is clear and sharp..........great job Matt! All you need now are some eagles to see! Enjoy your year here everyone! :bye 1:

Re: Harrison Mills Observation and Discussion Nest thread ..2018--2019

Posted: Mon Sep 02, 2019 2:08 pm
by Yolande
What a great climb and such a wonderful improvement in the cams!

Matt waving good-bye... :D I think he enjoyed the climb!
Untitled 41632.jpg

Re: Harrison Mills Observation and Discussion Nest thread ..2018--2019

Posted: Mon Sep 02, 2019 2:10 pm
by Yolande
Thanks so much for co-ordinating everything, Judy! And for zooming, Bev! And to DavidH, and Myles - and of course, MATT!

And thanks Heather, Sue, Jean, Marianne, and gemini for being here too and all the great scaps and obs you posted!

...a wonderful day for a climb - that's for sure... :yes:

Re: Harrison Mills Observation and Discussion Nest thread ..2018--2019

Posted: Mon Sep 02, 2019 2:11 pm
by IrishEyes
Trying the Pre Sets on the N Cam

Not working this is Moms perch
screenshot_25.jpg
I also shut down my computer and tried them on the Fire Fox browser.

Re: Harrison Mills Observation and Discussion Nest thread ..2018--2019

Posted: Mon Sep 02, 2019 2:11 pm
by Heather L
Yolande wrote:
Mon Sep 02, 2019 2:10 pm
Thanks so much for co-ordinating everything, Judy! And for zooming, Bev!

And thanks Heather, Sue, Jean, Marianne and gemini for being here too and all the great scaps and obs you posted!

...a wonderful day for a climb - that's for sure... :yes:
Thank you Yolande , I was on pins and needles worrying Dad would show up. :D

Re: Harrison Mills Observation and Discussion Nest thread ..2018--2019

Posted: Mon Sep 02, 2019 2:13 pm
by Heather L
IrishEyes wrote:
Mon Sep 02, 2019 2:11 pm
Trying the Pre Sets on the N Cam

Not working this is Moms perch

screenshot_25.jpg

I also shut down my computer and tried them on the Fire Fox browser.
Oh Dear , Is it a big job to reset the Pre Sets

Re: Harrison Mills Observation and Discussion Nest thread ..2018--2019

Posted: Mon Sep 02, 2019 2:13 pm
by Yolande
Heather L wrote:
Mon Sep 02, 2019 2:11 pm
Yolande wrote:
Mon Sep 02, 2019 2:10 pm
Thanks so much for co-ordinating everything, Judy! And for zooming, Bev!

And thanks Heather, Sue, Jean, Marianne and gemini for being here too and all the great scaps and obs you posted!

...a wonderful day for a climb - that's for sure... :yes:
Thank you Yolande , I was on pins and needles worrying Dad would show up. :D
That was in the back of my mind, too Heather... :mihihi: Happy we saw Matt instead! I added a few names to the post you quoted - realized I had forgotten to thank David, Myles - and Matt. :%: Blaming over-excitement on my part....

Re: Harrison Mills Observation and Discussion Nest thread ..2018--2019

Posted: Mon Sep 02, 2019 2:19 pm
by Yolande
IrishEyes wrote:
Mon Sep 02, 2019 2:11 pm
Trying the Pre Sets on the N Cam

Not working this is Mscreenshot_25.jpg

I also shut down my computer and tried them on the Fire Fox browser.
I re-booted as well, Bev - the presets on the SPTZ are still off kilter....

Oh well - I guess that happened when the lens covers came off - but it seems worth it...

I should shake a leg - I think I've been sitting for too long..LOL

:bye 1:

Re: Harrison Mills Observation and Discussion Nest thread ..2018--2019

Posted: Mon Sep 02, 2019 2:20 pm
by Heather L
Kitcat11848 wrote:
Mon Sep 02, 2019 2:05 pm
Heather L wrote:
Mon Sep 02, 2019 1:57 pm
Kitcat11848 wrote:
Mon Sep 02, 2019 1:55 pm
As Jean said, lots of rigging. I’m in awe at how he knows just which ropes to pull to move. He makes it look easy :mihihi: thanks for the awesome virtual experience of climbing up a 100’ tree. :ohmy:
Hi Marianne the nest is 175 ft up and the tree i believe is 220 ft tall :w00t:
Heather, thanks. That is HIGH :w00t: no way could I be up there. Heights give me the hibby gibbys.
It is the Penthouse of Nests lol :yes:

Re: Harrison Mills Observation and Discussion Nest thread ..2018--2019

Posted: Mon Sep 02, 2019 2:21 pm
by IrishEyes
Thanks so much Judy for all you did here today and thanks Yolande for zooming and Matt for a great job on our cams and to you David and Myles ..


Thanks Heather, Sue, gemini , Marianne, Jean for your observations and s'caps !

Looking forward gemini to your videos ... :)


Enjoy the rest of your day everyone ! :grhug:

Re: Harrison Mills Observation and Discussion Nest thread ..2018--2019

Posted: Mon Sep 02, 2019 2:23 pm
by Heather L
Well this has been a very rewarding exciting day. My Thanks to Matt, David and Myles and all you wonderful Ladies..... Bev , Yolande, Judy, Sue, Gemini, Marianne and Jean. :grhug:
Dad and Lady D hope to see you both at the nest anytime soon now. :)
TTFN

Re: Harrison Mills Observation and Discussion Nest thread ..2018--2019

Posted: Mon Sep 02, 2019 2:28 pm
by JudyB
Yolande wrote:
Mon Sep 02, 2019 2:19 pm
IrishEyes wrote:
Mon Sep 02, 2019 2:11 pm
Trying the Pre Sets on the N Cam

Not working this is Moms perch
screenshot_25.jpg

I also shut down my computer and tried them on the Fire Fox browser.
I re-booted as well, Bev - the presets on the SPTZ are still off kilter....

Oh well - I guess that happened when the lens covers came off - but it seems worth it...

I should shake a leg - I think I've been sitting for too long..LOL

:bye 1:
Oh - are you saying that nothing happens when you use a preset - or that the cam goes somewhere, but not where it belongs? :chin:

When I saw your posts, I thought the cam didn't move when you clicked a preset - which is a different issue - and is why I called Matt in a panic and asked him to wait while I checked the presets. :oops2:

I wouldn't be at all surprised if the cams were moved a bit during the cleaning - Matt had a lot of trouble getting the South cover off. There is something that might help - I used to have to do it at Lafarge a lot because the vibration from the building where the cam was set moved the cam - and I can't remember the name of it, but will add that later. Let me know if you'd like me to give that a try for one or both cams - shouldn't hurt and might help.

And redoing the presets takes a bit of time, but isn't hard - and I'm hoping to add instructions for that in the zoomer area this week.

And I've remembered the name - it's either calibration or recalibration, and returns the cam to where it was originally set - which generally is where it was when we did the presets.

And I should also step away from the computer for a little while - thank you all for your coverage here!

Re: Harrison Mills Observation and Discussion Nest thread ..2018--2019

Posted: Mon Sep 02, 2019 2:29 pm
by IrishEyes
Yolande wrote:
Mon Sep 02, 2019 2:19 pm
IrishEyes wrote:
Mon Sep 02, 2019 2:11 pm
Trying the Pre Sets on the N Cam

Not working this is Mscreenshot_25.jpg

I also shut down my computer and tried them on the Fire Fox browser.
I re-booted as well, Bev - the presets on the SPTZ are still off kilter....

Oh well - I guess that happened when the lens covers came off - but it seems worth it...

I should shake a leg - I think I've been sitting for too long..LOL

:bye 1:
See you later Yolande an thanks!

Re: Harrison Mills Observation and Discussion Nest thread ..2018--2019

Posted: Mon Sep 02, 2019 3:05 pm
by Yolande
JudyB wrote:
Mon Sep 02, 2019 2:28 pm
Yolande wrote:
Mon Sep 02, 2019 2:19 pm
IrishEyes wrote:
Mon Sep 02, 2019 2:11 pm
Trying the Pre Sets on the N Cam

Not working this is Mscreenshot_25.jpg

I also shut down my computer and tried them on the Fire Fox browser.
I re-booted as well, Bev - the presets on the SPTZ are still off kilter....

Oh well - I guess that happened when the lens covers came off - but it seems worth it...

I should shake a leg - I think I've been sitting for too long..LOL

:bye 1:
Oh - are you saying that nothing happens when you use a preset - or that the cam goes somewhere, but not where it belongs? :chin:

When I saw your posts, I thought the cam didn't move when you clicked a preset - which is a different issue - and is why I called Matt in a panic and asked him to wait while I checked the presets. :oops2:

I wouldn't be at all surprised if the cams were moved a bit during the cleaning - Matt had a lot of trouble getting the South cover off. There is something that might help - I used to have to do it at Lafarge a lot because the vibration from the building where the cam was set moved the cam - and I can't remember the name of it, but will add that later. Let me know if you'd like me to give that a try for one or both cams - shouldn't hurt and might help.

And redoing the presets takes a bit of time, but isn't hard - and I'm hoping to add instructions for that in the zoomer area this week.

And I've remembered the name - it's either calibration or recalibration, and returns the cam to where it was originally set - which generally is where it was when we did the presets.

And I should also step away from the computer for a little while - thank you all for your coverage here!
Hi Judy - just back for a quick check and sorry about the confusion.

The cam doesn't go to where it belongs - it goes somewhere else which is not the correct pre-set... not where one is expecting it to go....

Thanks for today, Judy..... :thumlft:

ADD: 3:11pm There was at least one pre-set on the NPTZ [BSB] which was not the same branch as on the BSB pre-set on the SPTZ - so maybe it's a good time for us all to take a look anyway...?

Re: Harrison Mills Observation and Discussion Nest thread ..2018--2019

Posted: Mon Sep 02, 2019 3:12 pm
by marg
Just checking the various nests I missed it today! Will there be a video later? Thanks Marg